EM Test Telecom NX7 - Rent Surge & Power Fail System

Transient & Telecom Surge System

EM Test Telecom NX7 - Rent Surge & Power Fail System

Immunity Telecom Surge Generator

      • 7kV Surge, Telecom Surge, Ringwave, Power Fail & EFT
      • ISO 17025 Accredited Calibration Included
      • Monitoring Ports on Front Panel for Voltage & Current
      • Built-in single phase CDN 400V AC/DC 32Amps
      • Free Technical Support & 2 Days Free Transit
      • Laptop with Software included with rental
      • Turnkey Solution - Arrives Ready for Testing!

 

Overview

The EM Test NX7 platform with modules for Telecom Surge, combination wave, ringwave, power failure and EFT/Burst testing. This system is the most comprehensive model compact bsprt-1-400-32 that includes a variety of different capabilities for transient testing. This test system provides an ultra compact, easy to use, touch screen allowing for effective testing. It is the most versatile tester to address transient and power fail requirements for both international and commercial standards. An ISO 17025 accredited calibration, laptop with software, and associated cords is included with the rental.

This product includes many reprogrammed test routines ideal for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11, Telecom requirements and CE Mark. This EM Test pulse generator includes internal single-phase Coupling/Decoupling Network (CDN) that can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 Amp per phase. With separate power mains supply inputs, it allows the utilization of different EUT supply voltages for maximum flexibility.

EM Test NX7 - Rental Immunity Accesories

Immunity Telecom Surge Generator

      • 7kV Surge, Telecom Surge, Ringwave, Power Fail & EFT
      • ISO 17025 Accredited Calibration Included
      • Monitoring Ports on Front Panel for Voltage & Current
      • Built-in single phase CDN 400V AC/DC 32Amps
      • Free Technical Support & 2 Days Free Transit
      • Laptop with Software included with rental
      • Turnkey Solution - Arrives Ready for Testing!

 

Overview

The EM Test NX7 platform with modules for Telecom Surge, combination wave, ringwave, power failure and EFT/Burst testing. This system is the most comprehensive model compact bsprt-1-400-32 that includes a variety of different capabilities for transient testing. This test system provides an ultra compact, easy to use, touch screen allowing for effective testing. It is the most versatile tester to address transient and power fail requirements for both international and commercial standards. An ISO 17025 accredited calibration, laptop with software, and associated cords is included with the rental.

This product includes many reprogrammed test routines ideal for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11, Telecom requirements and CE Mark. This EM Test pulse generator includes internal single-phase Coupling/Decoupling Network (CDN) that can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 Amp per phase. With separate power mains supply inputs, it allows the utilization of different EUT supply voltages for maximum flexibility.

Data Sheet User Manual Application Guide - CDNs

Common Standards

EN/IEC 61000-4-4EN/IEC 61000-4-5EN/IEC 61000-4-12, IEC 61000-4-11

IEC 61000-4-29, ANSI C62.41C62.45, UL 1449

BURST MODULE 

 

Test voltage

200 V - 5,500 V ± 10%; 100 V - 2,750 V ± 10% into 50 ohm

Pulse shape

 5/50 ns into 50 ohm and 1,000 ohm

 Rise time tr

 5 ns ± 30% into 50 ohm; 5 ns ± 30% into 1,000 ohm

Pulse width td

 50 ns ± 30% into 50 ohm; 50 ns -15/+100 ns into 1,000 ohm

Source impedance

 50 ohm

Polarity

 Positive, negative


 TRIGGER CIRCUIT

 

Trigger of bursts

 Automatic, manual, external

Synchronization

 0° - 360°, resolution 1° (16 - 500 Hz)

Burst duration (td)

 td = 0.10 ms - 9,999 ms

Repetition rate (tr)

 tr = 10 ms - 9,999 ms

Spike frequency

 f = 1 Hz - 1,000 kHz

Test duration

 T = 0:01 min - 99:59 min T > 99:59 min --> endless

 OUTPUTS

 

Direct

 Via 50 ohm coaxial connector

Coupling mode

 L, N, PE; all combinations

EUT supply

 AC: 300 V / 400 V, 50/60 Hz DC: 300 V / 400 V, Current: 16 A / 32 A

CRO trigger

 5 V trigger signal for oscilloscope

 TEST ROUTINES

 

Quick Start

 On-line adjustable parameters, easy-to-use

Standard Test routines

 As per IEC/EN 61000-4-4, Levels 1 - 4 As per IEC/EN 61000-6-1, -6-2 As per ECE R-10 Rev5

Extended Test routines

Change voltage after T, Frequency sweep within one burst, Frequency sweep with constant number of pulses, Frequency sweep with constant burst duration, Synchronous burst release, Random burst release

 OPTIONS

 

CCI

 Capacitive coupling clamp as per IEC/EN 61000-4-4

CCI PVKIT 1

 Adapter set for capacitive coupling clamp calibration included: - Transducer plate as per IEC/EN 61000-4-4 Ed 3.0, - Support for positioning the PVF 50 on 100 mm height as the capacitive coupling clamp, - PVF AD 3 to match the Transducer plate to the PVF 50

PVF 50

 100:1 divider, 50 ohm

PVF 1000

 500:1 divider, 1,000 ohm

PVF BKIT 1

 Kit for burst pulse verification consisting of PVF 50, PVF 1000 and adapter for EUT port in a plastic case for storage

PVF AD 1

 Adapter to match PVF 50 load resistor to the EUT supply of NX-series coupling network, 3-phase coupling network

ITP

 Immunity test probes (electrical field generation)

ITP/H

 Immunity test probe (magnetic field generation)

 SURGE MODULE

 

Voltage (o.c.)

 200 V - 7,000 V ± 10%

Pulse front time

 1.2 µs ± 30%

Pulse duration

 50 µs ± 20%

Current (s.c.)

 Max. 3,500 A ± 10%

Pulse front time

 8 µs ± 20%

Pulse duration

 20 µs ± 20%

Polarity

 Positive, negative, alternate

 TRIGGER CIRCUIT

 

Release of pulses

 Automatic, manual, external

Synchronization

 0° - 360°, resolution 1°

Repetition rate

 max. 1 Hz (1 s - 9,999 s)

Event counter

 1 - 99,999, selec