6kV Combination Wave/Surge Generators Equipment

Showing 1 to 9 of 10 products

Generator, Coupler, & CCL

Conducted Immunity System Features:

      • 7kV Surge & Ring, 5kV EFT,  3-Phase CDN & CCL
      • Axos 8, 3-Phase CDN (480V/32Amp), & CCL
      • Single Unit Solution - IEC 61000-4-4,5,&12
      • Voltage and Current Monitoring - Front of Unit
      • Easy to Operate, Manual & Automated Test Modes
      • Front Panel Attenuated Voltage & Current Monitoring 
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Haefely Hipotronics Axos8 conducted immunity test generator allow for 6kV surge/combination wave testing, 5kV EFT/Burst, and a 7kV Ringwave (optional Dips and Interrupts are availible) This product is a combination of three individual products, the Axos 8, PF-COMB 32, and CCL. These individual test accessories/generator can be rented individual or as a complete system.

This Equipment is quite large and needs to ship via freight.  Select Fedex ground (no charge), and then we will call you for a shipping account number or a separate payment for the shipping costs (approximately $200 each way).

 

Immunity Waveform Generator

Immunity Surge, EFT, & Ringwave Generator

      • 7kV Surge, Ringwave (Power Fail), & 5.5kV EFT/Burst 
      • ISO 17025 Accredited Calibration Included
      • Monitoring Ports on Front Panel for Voltage & Current
      • Built-in single phase CDN 16Amps
      • Free Technical Support & 2 Days Free Transit
      • Opto-Link, Ethernet and USB for remote control
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Rent the EM Test NX7 EMI test generator to 7kV EFT and 5kV surge with a built-in 16 amp single phase coupler (220V/16Amps). This test system provides an ultra compact, easy to use, touch screen allowing for effective testing. It is the most versatile tester to address transient and power fail requirements for both international and commercial standards. An ISO 17025 accredited calibration, laptop with software, and associated cords is included with the rental.

This Immunity Test Generator includes an easy-to-use color touch screen allow for efficiently changing of testing parameters. It can be operated manually from the intuitive front touch screen or remotely via its built-in Ethernet, USB or optical interface. The NX 7 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing.

This product includes many reprogrammed test routines ideal for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11 and CE Mark. This EM Test pulse generator includes internal single-phase Coupling/Decoupling Network (CDN) that can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 Amp per phase. With separate power mains supply inputs, it allows the utilization of different EUT supply voltages for maximum flexibility.

EM Test Immunity Waveform Generator

In Stock

Conducted Immunity Generator Features 

      • 7kV Surge &  6kV 100kHz Ring Wave, EFT 5.5kV
      • ISO 17025 Calibration & Software Included
      • Built-in single Phase coupler/decoupler 300V/16A
      • Free Technical Support & 2 Days Free Transit
      • External variac control 0-10Vdc & Fail inputs
      • Manual operation from front panel & Remote
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The EM Test UCS500N7 is an EMC Immunity Test equipment is an all in one box for testing EFT to 5.5kV, Surge to 7kV and 100kHz Ringwave to 6 kV, with built-in single phase coupler and software. This test equipment provides optional Dips and Interrupts testing with the V4780 S2 external variac. The UCS500N7 includes a built-in CDN for single phase it can be extended for testing three-phse DUT's by means of automatically controlled external coupling network up to 100A. 

This Immunity Test Generator can be operated via the front panel or by remote via the built-in USB or GPIB interface. Fail inputs allow control an ongoing test sequences based on the status of the DUT. Monitoring outputs (BNC) are offered for easy signal measurement and verification. This EMI test equipment provides a fully compliant that goes to levels beyond common testing requirements.

The UCS500n7 includes many reprogrammed test routines ideal for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11, EN/IEC 61000-4-12, CEMark, ANSI/IEEE C62.41 cat. B, EN IEC 61000-6-1, and EN IEC 61000-6-2. This product also includes both pre-programmed standard tests and a quick start menu allowing for parameters to be changed on-line during the test to evaluate the susceptibility level of an individual DUT. 

6kV Immunity Test System

In Stock

Conducted Immunity Generator Features 

      • 6.6kV Surge & 100kHz Ring Wave, EFT 4.8kV
      • ISO 17025 Accredited Calibration included
      • CDNs - Single/Three phase up to 620V/100A
      • Free Technical Support & 2 Days Free Transit
      • Touch Panel Screen, Easy to use Architecture 
      • Both IEC and ANSI coupling methods
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq (previously Schaffner) NSG 3060 EMC Immunity generator provides testing for EFT(electrical fast transients) to 4.8kV, Surge to 6.6kV, 100kHz ring wave to 6.6kV and offers solutions for both CE mark, ANSI, and IEC testing.  A2LA accredited calibration and two free days of transit time is included in the rental equipment priceIt includes both coupling methods associated with IEC and ANSI EMC testing standards. We also offer the full line of accessories available for rent, including the CDN 3083 series (CDN3083-S100 & CDN3083-B100), allowing for enhanced testing capabilities. 

This multifunction generator offers a user-friendly design to help streamline testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN 61000-4-12, ANSI C62.41, C62.45, and UL 1449. It offers a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel. This system is often rented with the CDN 3061 (coupling decoupling network) allowing for single phase coupling up to 270V/16A.

This Immunity Test Generator has a Ethernet port for connect with a PC and includes window based software. This simplifies electromagnetic compatibility testing allowing for compilation of complex test sequences with diverse pulse types. The software with the NSG3060 test set enables the user to create reports and enter observations as the test progresses increasing the efficiency of long-term tests.