Automotive Immunity Equipment (ISO, GMW, SAE, & JASO) 
Automotive Immunity Equipment (ISO, GMW, SAE, & JASO) 
Renting EMC test equipment for automotive testing provides a cost efficient solution for testing needs without the expensive and timely process of purchasing new equipment. Automotive electromagnetic compatibility pertains to the susceptibility and potential of products and components to emit and be affected by electromagnetic fields. Automotive emi emc simulation for vehicles differs from commercial testing by the large role company based standards play rather than international standards. However, many of these manufacturer standards utilize the ISO series of standards, specifically ISO 7637-2, as a baseline for testing.  


Automotive EMC testing is done in a variety of ways to meet the many unique automotive requirements from both international and manufacturer standards. Many manufacturer standards use ISO international standards as a benchmark and require variations to parameters within the standard. When testing for Automotive ESD the most common standard is ISO 10605. The most common non-ESD based ISO standard is ISO 7637. When attempting to meet manufacturer automotive standards ISO waveforms are used as a base line to which modifications are made. Common EMC Testing Car Diagram - Automotive EMC Test Equipment
We carry EMI EMC test equipment manufactured by EM Test and Teseq, including the NSG5500 and LD200N, VDS200N, and UCS200N. They provide equipment that generates load dump, fast transients, and power variations tests required by ISO 7637-2, ISO 16750, SAE J1113 and other generic standards. They are also compliant with many manufacturer's standards, including BMW, Ford, GMW 3097, Chrysler, and Nissan. The EM Test automotive EMI test units are unique, because they can be used separately, or they can be connected and used for the complete series of ISO 7637 tests, with the UCS 200n50 used as the central coupler/decoupler. We also rent Automotive Battery Simulators and Load Dump Generators to facilitate testing to many international and manufacturer standards. Typical Immunity Setup using Automotive EMC Test Equipment

Automotive EMC Test Equipment Rental - Automotive EMI

RENTAL

ESD3000 DN2 330pF/2KΩ 30kV Rental - ISO 10605 Test Equipment

The DN-2 (330pF/2KΩ) network by EMC Partner with the ESD 3000 a hand-held, lightweight, electrostatic discharge gun for air and contact discharge to 30kV. The DN2 Resistance Capacitance (RC) Network allows for testing with 330pF/2kΩ and requires the RM32 for all testing. A2LA accredited calibration and technical support is included in the rental equipment price.

EMC Partner software comes with this Automotive EMC Test Equipment allowing for remote control and reports to be generated. The design of the interface for the ESD3000 DN 2 offers the user a quick way to change test parameters with one hand. To facilitate additional testing capabilities this simulator allows networks to be easily removed by loosing bottom nob and removing/adding networks. The ESD gun can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.

This electrostatic discharge test equipment can be run with AA batteries or rechargeable battery pack. Electronic polarity reversal, including alternating polarity, can also be accomplished by the simulator. The networks capabilities allow for testing to ISO 10605, JASO, SAE J1113, TR 10605 and other automotive specs to 30kV.

Out of Stock

RENTAL

ESD3000 DN3 150pF/2KΩ 30kV Rental - ISO 10605 Test Equipment

The DN3 by EMC Partner with the ESD 3000 is a hand-held, lightweight, electrostatic discharge gun for air and contact discharge to 30kV. The DN3 Resistance Capacitance (RC) Network allows for testing with 150pF/2kΩ and requires the RM32 for all testing. A2LA accredited calibration is included in the EMC rental equipment price.

EMC Partner software comes with the Automotive EMC Test Equipment rental allowing for remote control and reports to be generated. The design of the interface for the ESD3000 DN 3 offers the user a quick way to change test parameters with one hand. The ESD gun can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.

The EMC Partner test equipment can be run with AA batteries or rechargeable battery pack. Electronic polarity reversal, including alternating polarity, is provided with the ESD3000. The networks capabilities allow for testing to ISO 10605, JASO, SAE J1113, TR 10605 and other automotive specs to 30kV

Out of Stock

RENTAL

ESD3000 DN6 300pF/330Ω 30kV Rental - ISO 10605 Test Equipment

The DN6 by EMC Partner with the ESD 3000 is a hand-held, lightweight, electrostatic discharge gun for air and contact discharge to 30kV. The DN6 Resistance Capacitance (RC) Network allows for testing with 330pF/330Ω and requires the RM32 for all testing. A2LA accredited calibration is included in the EMC rental equipment price.

EMC Partner software comes with the Automotive EMC Test Equipment rental allowing for remote control and reports to be generated. The design of the interface for the ESD3000 DN-6 offers the user a quick way to change test parameters with one hand. The ESD gun can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.

The EMC Partner test equipment can be run with AA batteries or rechargeable battery pack. Electronic polarity reversal, including alternating polarity, is provided with the ESD3000 DN6. The networks capabilities allow for testing to ISO 10605, JASO, SAE J1113, TR 10605 and other automotive specs to 30kV

Out of Stock

RENTAL

DN2 330pF/2kΩ Network Rental - ISO 10605 Test Equipment

The DN 2 by EMC Partner is a 330 pf/ 2k ohm Resistance Capacitance (RC) network for air discharge and contact mode to 30kV. This Discharge network requires the ESD 3000 and RM32 to be used which are priced separately. A2LA accredited calibration included in the EMC rental equipment price. The DN2 network allows for testing to standards for both ISO 10605 and TR10605.

Options:
  • Rental 1 Week $175.00
  • Rental 1 Month $349.00

RENTAL

DN6 330pF/330Ω Network Rent & Buy - ISO 10605 Test Equipment

The DN6 by EMC Partner is a 330 pf/ 300 ohm Resistance Capacitance (RC) network for air discharge and contact mode to 30kV. The discharge network requires the ESD 3000 and RM32 to be used which are priced separately. A2LA accredited calibration is included in the EMC rental equipment price. The DN 6 network allows for testing to standards to ISO 10605 and many other automotive standards.

Options:
  • Rental 1 Week $200.00
  • Rental 1 Month $400.00

SALE/RENTAL

RM32 30kV Relay Module Rent & Buy - ISO 10605 & MIL-STD-883

The RM 32 by EMC Partner is required for the ESD3000 to test up to 30kV. This relay module is required for the networks beginning with "DN", including the DN-1, DN-2, DN-3, and DN-6. It allows for testing to IEC 61000-4-2, ISO 10605, MIL-STD-461, MIL-STD-883, and many others. 

Options:
  • Rental 1 Week $99.00
  • Rental 1 Month $199.00
  • Purchase Used $4,300.00