ESD3000 DN6 300pF/330Ω 30kV Rental - ISO 10605 ESD

Availability:
In Stock - Order By 3PM Ships Today!

EMC Partner 30kV System:

  • ESD3000 ESD Simulator DN-6 Network
  • 330pF/300Ohm RC Network to 30kV
  • Can be rented individually or with DN-2 & DN-3
  • Current ISO 17025 A2LA Calibration Included

Get weekly, two week, and monthly rentals on all products

Got Questions about the equipment? Get technical support

Two FREE days transit time with every rental

Request A Quote

Description

ESD Gun Features

      • Air Discharge & Contact-discharge - 30kV (100V Steps)
      • Rent & Buy Used - Lease Options Available
      • ISO 10605 Solution, 300pF/330Ω Network
      • Load/Save Predefined & Customized Tests
      • Programmable level- and polarity ramp
      • All Rentals - ISO 17025 Cal & 2 Days Transit Time

Overview

The DN6 by EMC Partner with the ESD 3000 is a hand-held, lightweight, electrostatic discharge gun for air and contact discharge to 30kV. The DN6 Resistance Capacitance (RC) Network allows for testing with 330pF/330Ω and requires the RM32 for all testing. A2LA accredited calibration is included in the EMC rental equipment price.

EMC Partner software comes with the Automotive EMC Test Equipment rental allowing for remote control and reports to be generated. The design of the interface for the ESD3000 DN-6 offers the user a quick way to change test parameters with one hand. The ESD gun can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.

The EMC Partner test equipment can be run with AA batteries or rechargeable battery pack. Electronic polarity reversal, including alternating polarity, is provided with the ESD3000 DN6. The networks capabilities allow for testing to ISO 10605, JASO, SAE J1113, TR 10605 and other automotive specs to 30kV

Data Sheet User Manual

Specifications

Common Standards

ISO 10605, JASOSAE J1113, 

TR 10605FMC1278, GMW 3097

Voltage Range Air Discharge       

± 2kV to 30kV

Voltage Range Contact Mode

± 2kV to 30kV

RC Network

330 pf/ 330 ohm

Resolution

100V

Repetition Rate

Single shot mode, variable 0.05 to 30s

Programmable

voltage and polarity

Battery Recharge Time

10 x UM-3/AA batteries

Useable during recharge

Yes

Weight

870 grams, 1.9 pounds

Dimensions

40x7.6x7.6 cm, 19x3x3 inches

Packing List/Accessories

Buy Used ESD3000 ESD Simulators & Accessories

There are a variety of testing accessories that are included with the simulator itself and that are available for purchase.

Take advantage of 60 warranty no available on Ebay.

 

Included with standard rental/purchase of ESD Simulator:

    • ESD Simulator/Gun
    • Network (DN) or Module (DM)
    • Calibration Documentation
    • RM3 Module (only for 30kV)
    • Air Discharge Tip
    • Contact Discharge tip
    • Metal Sphere (only for 30kV)
    • Ground Cable with Clamp
    • Battery Charger
    • Power Cord
    • HTE0600 (only for 30kV)
    • 10 AA Rechargeable Batteries (Installed)
    • User Manual
    • Calibration Certificate
    • Rs 232 Connector
    • White Case 

Video

Transient Specialists: ESD Simulator Comparison 

Description: This overview video provides a comparison or review, of a variety of simulators for IEC 61000-4-2. It mentions

features of Mz-15 Minizap, Dito, ESD3000, and NSG 435 including setup and advantages for each. This video covers ESD

testers designed for IEC 61000-4-2 (150pF/330Ohm network) to 16kV.s Some considerations discussed include scree,

modifying testing parameters, used market considerations, and others. 

HV Technologies: ESD Tester Demonstration 

Description: This overview video, by HV Technologies, describes how to use the ESD3000 ESD Gun. It walks through

how you will receive the test equipment, including accessories, then how to manipulate testing parameters with

the touch screen. Finally, it shows how to change or add different networks or test accessories to the simulator.

Testimonials

I would recommend Transient Specialists. Transient Specialists always provides quality products within the established time frames. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.

Scott D., TUV SUD Canada

 

Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!

John H., Gates Air, Inc.

 

Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.  

Adam P., Clark Testing

 

Working for a testing company I deal with renting equipment all the time.  Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.

Richard T., National Technical Systems 

You may also like

Recently viewed