Automotive EMC Test Equipment Rentals
Showing 1 to 9 of 17 products
The NSG5500 made by Teseq offers solutions for transient immunity testing based on ISO 7637 pulses 1, 2a, 3a, 3b, and the load dump pulses from ISO 16750-2. It includes the +ARB Option for pulses 2b and 4. Our automotive EMI rental equipment includes an accredited calibration in the rental price. The automotive transient immunity generator includes a coupler/battery switch for testing requiring battery coupling.
The NSG 5500 system allows for testing to international, commercial, and company specific standards including. The Arbitrary waveform generator option supports >64,000 segments plus 1GB of Clone data with up to 10Ms/s 16 bit operation. Control of the testing parameters is done through PC running AutoStar™ software. The NSG 5500 Automotive EMI Test Equipment allows for testing to be completed through a single output connector.
This all-in-one product comes with a laptop with software pre-installed for efficient testing. Additional inputs and outputs are located on the rear panel for test execution control purposes and monitoring. The NSG5500 is the first product to offer a completely internal 100 amp. battery switch for transient immunity testing. These automotive transient immunity generators can be used with the PA 5840-300 battery Simulator or the PA 5840-75 Battery Simulator.
The PA5840 by Teseq is the DC power supply for use with the Teseq NSG 5500 automotive EMC immunity test system. A2LA accredited calibration is included in the automotive EMC rental equipment price. This fast, reliable, and modular DC power supply comes with up to 18 kW of power. This latest model has 4 quadrant operation, important in the EV environment.
The PA5840 by Teseq is the DC power supply for use with the Teseq NSG 5500 automotive EMC immunity test system. A2LA accredited calibration is included in the EMC rental equipment price. This fast, reliable, and modular DC power supply comes with up to 6 kW of power.
The UCS200N100 by EM Test is a fast transient and microburst generator for waveforms 1,2,3a,3b of SAE J1113, JASO, ISO 7637 and many others. The built-in coupling network can be used and controlled by any unit of the LD200N series, VDS200N series and PFS200N series. A2LA accredited calibration is included in the EMC rental equipment price.
The UCS200n100 series is equipped to meet all international and car manufacturer specifications from around the globe. Testing parameters can be modified easily through the display or via software. This Automotive EMC Test Equipment goes beyond standard's requirements waveform parameters of the Micropulse generator can be varied in a wide range by means of the FreeStyle mode.
An innovative color touch screen with intuitive menu structure and defined keys for Start / Stop / Pause, indicated by LED bars, enables the user to program test routines quickly and accurately. The UCS 200N100 also includes built in battery switch an over current protection for added testing safety. The UCS200N can be integrated with the LD200N and VDS200N for a complete immunity test system, similar to that of the NSG 5500.
The EM Test VDS200n 15 power supply, and Interrupts is designed for automotive EMC standards including ISO 7637, waveforms 2b an 4. This battery supply simulator and DC voltage source provides a diverse set waveforms recommended by both international and company standards. A2LA accredited calibration is included in the EMC rental equipment price.
This waveform generator can easily be integrated with the UCS 200n and the LD 200n automotive transient immunity generators for a complete automotive test system, similar to that of the NSG 5500. It provides Current up to 200A (peak up to 1,000A) with low output impedance. The VDS 200n15 Automotive EMC Test Equipment also allows for both pre-programmed Standard Test and modification of individual pulses.
The EM Test Arbitrary waveform generator is used to simulate batteries under field conditions. This Immunity test product Generates and records automotive waveforms ideal for automotive standards including SAE J1113-2. A2LA accredited calibration is included in the EMC rental equipment price
The Autowave can be used in combination with VDS 200n models or any programmable DC source with 5/10VDC signal output. Autowave.control is a software developed to control the functions of this product. It provides a library of test routines per various manufacturer specifications. By means of autowave.control the user can program any kind of waveform either composed from segments or points and download into the AutoWave.
This Automotive EMC Test Equipment has Enhanced graphic tools are at hand to adjust the waveform according to individual requirements. Autowave.control provides a library of an extensive compilation of predefined segments as well as a large number of test routines as per various manufacturer specifications. This product combines 4-channel arbitrary generator and a 2-channel transient wave recorder into a compact unit.
PFM 200N100 made by EM Test is a unique automotive power fail simulator for LV 124 / LV 148 and Microinterruptions as per manufacturer standards. A2LA accredited calibration is included in the EMC rental equipment price. The PFM200N100 series includes a switch for the power supply line from 100 mA to 100A and a separate witch in the ground return path.
The PFM 200 N 100 has been designed to fully meet the requirements for E10, E13 and E14 of the LV 124 and the E48-09 of the LV148. It also allows performing microinterruptions with fast rise/fall time of as low as 200ns as required by GMW 3172, sec. 9.2.18. The PFM 200n100 when combined with the EM Test autowave, can be used as a substitute for the PFS 200n.
The EM Test capacitive coupling clamp by EMTest is used to couple pulses to I/O lines required in ISO 7637 waveform 3b and other automotive testing standards. It allows for cable up to 40mm in diameter and has a characteristic impedance of 50 ohms. A2LA accredited calibration is included in the EMC rental equipment price.
The effective coupling capacitance of the coupling clamp depends on the diameter and the material of the used cables. A typical estimated value can be expected around 100 pF. This clamp is specially designed to meet automotive standards specifically ISO 7637.
The coupling on signal lines of this Automotive EMC Test Equipment can usually not be effected capacitively without interfering with the signal flow. It is often impossible to contact the required circuit (direct), e.g. coaxial or shielded cables. In this case the coupling is realized with the capacitive coupling clamp. The interference simulator can be connected via a coaxial cable on both sides of the ACC coupling clamp.
This product made by EM Test is a set of Adapters for verifying EFT/Burst generators. The pulse shape of EFT/burst generators designed as per IEC 61000-4-4 have to be verified both into a 50ohm and a 1,000ohm load at the 50ohm coaxial HV output as well into 50ohm load at the output of the coupling network where the DUT is connected when testing mains supply lines. The CA EFT kit includes the load resistors and a set of adapter to connect the coaxial matching resistors appropriately to the DUT output port.