Automotive Electrostatic Discharge Simulators
    Automotive Electrostatic Discharge Simulators
      Automotive ESD Simulators attempt to replicate the quick release of electrical energy between two objects that have a potentially different voltage in an automotive environment. Automotive electrostatic discharge (ESD) testing varies significantly from the more commercial based testing in the numerous and different sets of automotive standards. One of the most significant differences is the higher voltage and ESD network (resistance/capacitance) requirements. Many automotive ESD requirements require testing to 30kV and specialized networks or tips for testing. Many automotive standards also add additional test or contact points, both inside and outside the vehicle, adding additional testing considerations. Much of the automotive electrostatic discharge requirements are also applicable to both Military and Avionics EMC Immunity Testing. Below you will find a breakout of the different components required for the EMC Partner ESD3000 which has capabilities to test to many automotive standards.

      ESD3000 Components for Automotive testing

      ESD testing standards for the automotive industry vary significantly from the more commercial based testing by the major role that manufacturer standards play. One of the largest used non-manufacturer based standard for automotive ESD is the International Organization for Standardization or ISO series of standards. These standards are often referenced by manufacturer standards as the framework not only ESD testing, but much of the automotive EMC Immunity testing requirements.
      • ISO 10605Test methods for electrical disturbances from electrostatic discharge
      • GMW3097 - General Specification for Electrical/Electronic Components and Subsystems, Electromagnetic Compatibility
      • SAE J1455 - Recommended Environmental Practices for Electronic Equipment Design in Heavy-Duty Vehicle Applications
      • FMC1278 - Electromagnetic Compatibility Specification For Electrical/Electronic Components and Subsystems 
      Automotive ESD Networks, Test Levels, and common standards table
      We offer a variety of ESD simulators that have the ability to meet many of the automotive ESD requirements. We carry electrostatic discharge simulators designed for automotive testing by Teseq and EMC Partner. The NSG 437 by Teseq offers a variety of testing modules to meet many standards with easy to use interface and interchangeable networks. The ESD3000 by EMC Partner offers the ability to rent individual networks, often providing a cost effective solution to automotive ESD testing. All of these ESD simulator rentals come with discharge tips and power supply/charging units.Our EMC rental customers have the ability to both rent and purchase these products online via our website. All our electrostatic discharge test equipment comes with an A2LA accredited and technical support.

      Teseq NSG 437 EMC Immunity Automotive ESD Simulator Block Diagram

      Automotive ESD Simulator Rentals | EMC Immunity Test Equipment

      Showing 1 to 9 of 10 products

      RENTAL

      NSG 437 Auto Rental - Teseq 30kV Automotive ESD Simulator for IEC 61000-4-2 & ISO 10605

      The Teseq NSG437 automotive ESD simulator allows for testing to 30kV air and contact with a simple and easy to use design. A2LA accredited calibration is included in the EMC rental equipment price. This equipment allows for testing to both 16kV and 30kV for air and contact allowing for efficient testing to several standards.

      This ESD test equipment allows for manipulation of testing parameters for EN IEC 61000-4-2ANSI C63.16, ISO 10605, and TR 10605 through the use of the display. It is designed to sit comfortably in the operator’s hand, with operating conditions constantly displayed and accessible on a bright, clear color touch display. This Teseq product is unique in offering an activity log where the number and type of simulations can be verified by time frame and standard.

      The NSG 437 ESD Simulator has a color touch display and keypad for parameter input shows the precise functional and test data with user-selectable language for convenient and safe operation worldwide. The simulator contains variable threshold selection for accurate discharge detection. This detection feature can be switched off when testing EUT’s with non-conductive surfaces, such as plastic housings.

      Options:
      • Rental 1 Week $645.00
      • Rental 1 Month $1,290.00

      RENTAL

      NSG 437 HBM Rental - Teseq 30kV ESD Simulator with INA4561 100pf/1500Ω Network

      The Teseq NSG437 ESD tester allows for testing to 30kv air and contact with a simple and easy to use design. A2LA accredited calibration is included in the EMC rental equipment price. This equipment comes with the INA4561 which provides a 100pf / 1500 Ω discharge network.

      The NSG 437 allows for testing to MIL-STD-883, MIL-STD-464, and many gaming ESD specifications. It is designed to sit comfortably in the operator’s hand, with operating conditions constantly displayed and accessible on a bright, clear color touch display. This Teseq product is unique in offering an activity log where the number and type of simulations can be verified by time frame and standard.

      The NSG 437 ESD Simulator has a color touch display and keypad for parameter input shows the precise functional and test data with user-selectable language for convenient and safe operation worldwide. The simulator contains variable threshold selection for accurate discharge detection. This detection feature can be switched off when testing EUT’s with non-conductive surfaces, such as plastic housings.

      Options:
      • Rental 1 Week $595.00
      • Rental 1 Month $1,090.00

      RENTAL

      ESD3000 DN3 Rental - Automotive 30kV ESD Simulator 150pf/2KΩ Network ISO 10605

      The DN3 by EMC Partner with the ESD 3000 is a hand-held, lightweight, electrostatic discharge gun for air and contact discharge to 30kV. The DN3 Resistance Capacitance (RC) Network allows for testing with 150pF/2kΩ and requires the RM32 for all testing. A2LA accredited calibration is included in the EMC rental equipment price.

      EMC Partner software comes with the Automotive EMC Test Equipment rental allowing for remote control and reports to be generated. The design of the interface for the ESD3000 DN 3 offers the user a quick way to change test parameters with one hand. The ESD gun can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.

      The EMC Partner test equipment can be run with AA batteries or rechargeable battery pack. Electronic polarity reversal, including alternating polarity, is provided with the ESD3000. The networks capabilities allow for testing to ISO 10605JASOSAE J1113, TR 10605 and other automotive specs to 30kV

      Options:
      • Rental 1 Week $545.00
      • Rental 1 Month $1,090.00

      RENTAL

      ESD3000 DN2 Rental - Automotive 30kV ESD Simulator 330pf/2KΩ Network for ISO 10605

      The DN-2 by EMC Partner with the ESD 3000 is a hand-held, lightweight, electrostatic discharge gun for air and contact discharge to 30kV. The DN2 Resistance Capacitance (RC) Network allows for testing with 330 pF / 2 kΩ and requires the RM32 for all testing. A2LA accredited calibration is included in the EMC rental equipment price.

      EMC Partner software comes with the Automotive EMC Test Equipment rental allowing for remote control and reports to be generated. The design of the interface for the ESD3000 DN 2 offers the user a quick way to change test parameters with one hand. The ESD gun can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.

      The EMC Partner test equipment can be run with AA batteries or rechargeable battery pack. Electronic polarity reversal, including alternating polarity, is provided with the ESD3000. The networks capabilities allow for testing to ISO 10605JASOSAE J1113, TR 10605 and other automotive specs to 30kV.

      Options:
      • Rental 1 Week $545.00
      • Rental 1 Month $1,090.00

      RENTAL

      ESD3000 DN6 Rental - Automotive 30kV ESD Simulator 300pf/330Ω Network ISO 10605

      The DN6 by EMC Partner with the ESD 3000 is a hand-held, lightweight, electrostatic discharge gun for air and contact discharge to 30kV. The DN6 Resistance Capacitance (RC) Network allows for testing with 330pF/330Ω and requires the RM32 for all testing. A2LA accredited calibration is included in the EMC rental equipment price.

      EMC Partner software comes with the Automotive EMC Test Equipment rental allowing for remote control and reports to be generated. The design of the interface for the ESD3000 DN-6 offers the user a quick way to change test parameters with one hand. The ESD gun can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.

      The EMC Partner test equipment can be run with AA batteries or rechargeable battery pack. Electronic polarity reversal, including alternating polarity, is provided with the ESD3000 DN6. The networks capabilities allow for testing to ISO 10605, JASOSAE J1113, TR 10605 and other automotive specs to 30kV

      Options:
      • Rental 1 Week $545.00
      • Rental 1 Month $1,090.00

      RENTAL

      DN6 Rental - Automotive network 330pf/330Ω for the ESD3000 ESD Simulator

      The DN6 by EMC Partner is a 330 pf/ 300 ohm Resistance Capacitance (RC) network for air discharge and contact mode to 30kV. The discharge network requires the ESD 3000 and RM32 to be used which are priced separately. A2LA accredited calibration is included in the EMC rental equipment price. The DN 6 network allows for testing to standards to ISO 10605 and many other automotive standards.

      Options:
      • Rental 1 Week $200.00
      • Rental 1 Month $400.00

      RENTAL

      DN3 Rental - Automotive Network 150pf/2KΩ for the ESD3000 ESD Simulator

      The DN 3 by EMC Partner is a 150 pf / 2k ohm Resistance Capacitance (RC) network for air discharge and contact mode to 30kV. The discharge network requires the ESD 3000 and RM32 to be used which are priced separately. A2LA accredited calibration is included in the EMC rental equipment price.The DN3 network allows for testing to standards ISO 10605, TR 10605, and many others.

      Options:
      • Rental 1 Week $175.00
      • Rental 1 Month $349.00

      RENTAL

      DN2 Rental - Automotive Discharge Network 330pf/2KΩ for the ESD3000 ESD Simulator

      The DN 2 by EMC Partner is a 330 pf/ 2k ohm Resistance Capacitance (RC) network for air discharge and contact mode to 30kV. This Discharge network requires the ESD 3000 and RM32 to be used which are priced separately. A2LA accredited calibration included in the EMC rental equipment price. The DN2 network allows for testing to standards for both ISO 10605 and TR10605.

      Options:
      • Rental 1 Week $175.00
      • Rental 1 Month $349.00

      RENTAL

      NSG 437 Rental - Teseq 30kV ESD Simulator per IEC 61000-4-2 & ANSI C63.16

      The Teseq NSG437 ESD gun allows for testing to 30kV air and contact with a simple and easy to use design. A2LA accredited calibration is included in the EMC rental equipment price. This equipment allows for testing to both 16kV and 30kV for air and contact allowing for efficient testing to and above several standards.

      This ESD test equipment allows for manipulation of testing parameters for EN IEC 61000-4-2ANSI C63.16 through the use of the display. It is designed to sit comfortably in the operator’s hand, with operating conditions constantly displayed and accessible on a bright, clear color touch display. This Teseq product is unique in offering an activity log where the number and type of simulations can be verified by time frame and standard.

      The NSG 437 ESD Simulator has a color touch display and keypad for parameter input shows the precise functional and test data with user-selectable language for convenient and safe operation worldwide. The simulator contains variable threshold selection for accurate discharge detection. This detection feature can be switched off when testing EUT’s with non-conductive surfaces, such as plastic housings.

      Options:
      • Rental 1 Week $495.00
      • Rental 1 Month $990.00

      Showing 1 to 9 of 10 products