These boxes, specifically designed for conducted RF immunity testing, include software which sweeps through the frequency ranges defined by the test specification (IEC 61000-4-5, Mil Std 461 cs114, DO 160 sec 20, and others), recording both calibration data and the data for the device under test.

Conducted RF Immunity Test Sets

Showing 1 to 9 of 10 products

RENTAL

A NSG 4070 - Teseq Conducted RF Test System per IEC 61000-4-6

The NSG 4070 is a multi-functional device for carrying out EMC immunity tests to accompany development and conformity testing in accordance to IEC / EN 61000-4-6, Namur and several automotive BCI standards.Its modular set-up using internal or external amplifiers enables a large variety of applications.

The powerful and easy to use firmware makes the NSG 4070 independent from an external PC and control software, however it can also be remote controlled for system operation. 

RENTAL

CWS500n1.4 EM Test Conducted RF Immunity Test Set per IEC 61000-4-6 With Dual Directional Coupler

EMTest compact single box for testing products for immunity to RF per EN IEC 61000-4-6, it includes a signal generator, amplifier and power meter, dual directional coupler.

RENTAL

EM Test CDN AF4 - Conducted RF Immunity Testing For Unshielded, Unsymmetrical Lines

EMTest CDN for 4 unshielded unsymmetrical lines to test  immunity to conducted RF per EN IEC 61000-4-6 and IEC/EN 60945.

RENTAL

EM Test CDN M2M3 Conducted RF Immunity Coupler For Single Phase 250 V/16 A

EMTest Single phase 2 or 3 line CDN for testing products for immunity to conducted RF per EN IEC 61000-4-6.

RENTAL

EM Test CDN M5 32A - Conducted RF Immunity Coupler/Decoupler for 3-Phase 400V / 32A

EMtest three phase 5 line (L1,L2,L3,N,Pe) CDN for testing products for immunity to RF per EN IEC 61000-4-6.

RENTAL

EM Test CNV504 - Dataline Coupler

EMTest CNV504N1.3 coupling/decoupling networks for unshielded  unsymmetrical interconnection signal/data lines. Surge pulses or Ringwave pulses are applied to unshielded unsymmetrical interconnected lines by means of standalone coupling/decoupling networks for 4 signal/data lines.

CNV 504 N1.3 combines three different applications; coupling of Surge pulse via capacitor or gas arrestor and coupling of Ringwave pulses via capacitor being required by EN IEC 61000-4-5 and/or EN IEC 61000-4-12. The required coupling mode, Differential or Common, can easily be selected by means of a simple jumper.

In accordance with EN IEC 61000-4-5 and EN IEC 61000-4-12 pulses are coupled via different coupling elements such as capacitors or gas arrestors depending on the characteristics of the line signals.

RENTAL

EM Test PFM 200N100 Series Automotive Power Fail Simulator

PFM 200N100 is a unique automotive power fail simulator for LV 124 / LV 148 and Microinterruptions as per manufacturer standards. The PFM 200 N 100 has been designed to fully meet the requirements for E10, E13 and E14 of the LV 124 and the E48-09 of the LV148. It also allows performing microinterruptions with fast rise/fall time of as low as 200ns as required by GMW 3172, sec. 9.2.18.

The PFM200N100 series includes a switch for the power supply line from 100 mA to 100A and a separate witch in the ground return path.

 

 

RENTAL

EM101 - EM Test Clamp For Conducted RF Test Systems

EMTest RF Injection clamp for testing products for immunity to RF per EN IEC 61000-4-6 - Includes the FTC 101 decoupling clamp.

 

RENTAL

F-120-6A Bulk Current Injection Probe For Conducted RF Testing to Mil Std 461 CS114, DO 160 sec 20

The F120-6A is a Fischer Custom Communications bulk current Injection Probe for testing products for immunity to conducted RF per Do 160 sec 114, Mil Std 461 CS114. Includes calibration fixture.

Showing 1 to 9 of 10 products