Conducted RF Immunity Testing Rentals

Conducted RF Immunity Testing Rentals

Conducted radio frequency (RF) immunity refers to an electronic or electrical systems ability to function while receiving RF stress in the environment that the systems will function. As we continue to utilize more of the RF spectrum this immunity testing has grown in importance. There are many standards that test to for an electronic or electrical systems conducted RF Immunity including EN IEC 61000-4-6, MIL-STD-461 CS114, RTCA DO-160 sec 20, and many others. EN IEC 61000-4-6 falls under the basic publication of IEC 61000, which is general guidelines for EMC. EN IEC 61000-4-6 Conducted RF immunity Requirements
We rent conducted RF immunity test systems that replicate the radio frequencies that electrical and electronic equipment is tested to. We carry both Teseq and EM Test conducted RF products to accommodate testing needs. To facilitate testing we also rent a wide range of accessories allowing for increased testing capabilities. Our conducted test equipment includes software which sweeps through the frequency ranges defined by the test specification (IEC 61000-4-5, Mil Std 461 cs114, DO 160 sec 20, and others), recording both calibration data and the data for the device under test. This automation allows easy and efficient testing for a wide range of applications.

Conducted RF Immunity Test Systems - EMI Test Equipment Rentals

Showing 1 to 9 of 10 products

RENTAL

CWS 500N Rental - EM Test Conducted RF Immunity Test System per IEC 61000-4-6

The CWS 500N1.4 by EM Test is a compact single box for testing products for immunity to RF. This EM Test rental product includes includes a signal generator, amplifier and power meter, and dual directional coupler. A2LA accredited calibration is included in the conducted RF generator rental price.

This conducted RF immunity generator has a diverse range of applications for testing to the 1kHz 80% Am singal as well as a 2Hz 80% AM signal to test medical appliances. As an added bonus the CWS 500n1 provides a 1Hz PM signal with 50% duty cycle required for test safety equipment. The EM Test CWS 500n1 is also equipped with a 1 GHz current monitor the can be used up to 1 GHz by means of an external amplifier. 

The CWS 500N 1.4 was created to test to EN/IEC 61000-4-6IEC 60601-1-2ISO 11452-4, and many others. This unique single box solution provides software allowing for many reprogrammed standards to be run efficiently. A diverse set of accessories are available for rent with the CWS 500N1 meeting any testing needs.

RENTAL

CWS 500N2 Rental - MIL-STD-461 CS114, DO-160 sec 20 Generator

The EM Test CWS 500N2 continuous wave simulator uses bulk current Injection (BCI) testing procedure to proof the immunity to electrical disturbances by narrowband electromagnetic energy. A2LA accredited calibration is included in the EMC rental equipment price. This compact product includes a built-in 100W class A amplifier up to 400MHz.

This Military EMC Test Equipment is designed to meet a variety of testing criteria with built in signal generator, amplifier and power meter, dual directional coupler.  Apart from the 1kHz 80% AM signal and also generates a 2 Hz 80% AM signal to test medical appliances and a 1 Hz PM signal with 50% duty cycle required to test safety equipment like fire alarms. This product has an easy to use interface allowing users to select and modify testing criteria via turning knob on the front of the unit.

The CWS500N2 is a single box solution for testing products to RF per MIL-STD-461 CS114, EN/IEC 61000-4-6, ISO 11452-4, RTCA DO-160 Sec 20 and many others. Equipped with a 1 GHz current monitor this immunity standards test equipment can be used up to 1 GHz by means of an external amplifier. Our EMC rental equipment includes the option of renting the accessory Bulk Current Injection Clamp (BCI) and other accessories required for CS11x series testing.

RENTAL

EM Test CDN AF4 - Conducted RF Immunity Testing For Unshielded, Unsymmetrical Lines

EMTest CDN for 4 unshielded unsymmetrical lines to test  immunity to conducted RF per EN IEC 61000-4-6 and IEC/EN 60945.

RENTAL

EM Test CDN M2M3 Conducted RF Immunity Coupler For Single Phase 250 V/16 A

EMTest Single phase 2 or 3 line CDN for testing products for immunity to conducted RF per EN IEC 61000-4-6.

RENTAL

EM Test CDN M5 32A - Conducted RF Immunity Coupler/Decoupler for 3-Phase 400V / 32A

EMtest three phase 5 line (L1,L2,L3,N,Pe) CDN for testing products for immunity to RF per EN IEC 61000-4-6.

RENTAL

EM Test CNV504 - Dataline Coupler

EMTest CNV504N1.3 coupling/decoupling networks for unshielded  unsymmetrical interconnection signal/data lines. Surge pulses or Ringwave pulses are applied to unshielded unsymmetrical interconnected lines by means of standalone coupling/decoupling networks for 4 signal/data lines.

CNV 504 N1.3 combines three different applications; coupling of Surge pulse via capacitor or gas arrestor and coupling of Ringwave pulses via capacitor being required by EN IEC 61000-4-5 and/or EN IEC 61000-4-12. The required coupling mode, Differential or Common, can easily be selected by means of a simple jumper.

In accordance with EN IEC 61000-4-5 and EN IEC 61000-4-12 pulses are coupled via different coupling elements such as capacitors or gas arrestors depending on the characteristics of the line signals.

RENTAL

EM 101 Rental - EM Test (Lüthi) Coupling Clamp Conducted RF Testing

The EM 101 made by EM Test (Lüthi) electromagmetic (EM) clamp is an RF current lnjection clamp, having inductive and capacitive coupling and allowing the induction of large currents on cables in the frequency range of 0.15 to 1000 MHz. The rental of this coupling clamp also includes the FTC 101 decoupling clamp. 

This EM Test RF coupling clamp induces a current on a cable by using inductive and capacitive coupling at the same time. The EM101 design has made it possible to improve the frequency range up to 1000 MHz by modifying the primary winding. This EM Test product is designed for testing to EN/IEC 61000-4-6 and many other conducted RF EMC standards.

RENTAL

F-120-6A Bulk Current Injection Probe For Conducted RF Testing to Mil Std 461 CS114, DO 160 sec 20

The F120-6A is a Fischer Custom Communications bulk current Injection Probe for testing products for immunity to conducted RF per Do 160 sec 114, Mil Std 461 CS114. Includes calibration fixture.

RENTAL

F-120-9A Bulk Current Injection Probe For Testing Per EN IEC 16000-4-6

The F120-9A is a Fischer Custom Communications bulk current injection probe for testing products for immunity to conducted RF per IEC 61000-4-6.

Showing 1 to 9 of 10 products