Coupler/Decoupler Network (CDN) Rentals

Showing 1 to 9 of 10 products

RENTAL

Coupling/Decoupling Network (CDN) Features

      • 620 Voltage/ 100Amps 3-Phase EFT & Surge
      • ISO 17025 Calibration included
      • 440 Volts with NSG 3040
      • Free Technical Support & 2 Days Free Transit
      • Manual CDN - Secure Wire Connections
      • Complies with IEC / EN 61000-4-5 and ANSI C62.45
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq CDN 3083-S100 is an external, manual, three phase, 620v, 100a coupler/decoupler for the combination wave/surge and 100kHz ringwave generated by the NSG3060 and NSG 3040. This Teseq Product enables coupling modes with all types of symmetrical and asymmetrical coupling given in the EN/IEC 61000-4-5 and ANSI C62.41 2002.

This coupling decoupling network comes assembled and on wheels, providing an easily maneuverable turnkey solution. An A2LA accredited calibration is included in the price of this test equipment. It is often used in conjunction with the CDN3083-B100 providing 100Amp coupling/decoupling for Burst/EFT (electrical fast transients). These products are ideal for applications that require high AC and DC voltages and currents.

The CDN30830-S100 has all components, surge decoupling networks, INA 3080s, INA 3084 and earth rails installed. This testing accessory also comes with several cables allowing for required connections to be made easily. It can be rented individually to supplement existing testing capabilities, must be used with NSG 3060 or NSG 3040, or in combination with either Teseq surge generator.

RENTAL

Coupling/Decoupling Network (CDN) Features 

      • 100 A (AC or DC); 690 VAC, 1000 VDC
      • ISO 17025 Calibration included
      • Meets IEC 61000-4-4 Ed.3.0
      • Free Technical Support & 2 Days Free Transit
      • Manual CDN - Use Will Variety Of Generators
      • Up to 8.8 kV burst pulses
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The CDN 3083-B100 is a manual, external three phase, 690V, 100A coupler/decoupler for the EFT/Burst generated by the NSG 3060, NSG 3040, or similar Teseq product. A2LA accredited calibration is included in the EMC testing accessory price. This product can has a maximum burst voltage of 8800 volts.

This ideal for industries and applications that require higher AC and DC voltages and currents, including power & telecom industry, renewable energy applications, electric vehicle and charging stations. Given that this accessories weighs roughly 11lbs, it allows placement of the coupling decoupling network to distances between it and EUT as required by the standard.

The CDN 3083 - B100 is designed for testing of electrical fast transients, specifically EN/IEC 61000-4-4. This testing accessory is often rented in conjunction with the CDN 3083-S100 for surge and ringwave. It is designed to be used with an EUT supply in AC mode up to 690V.

RENTAL

Coupling/Decoupling Network (CDN) Features 

      • 3-Phase EFT & Surge (480V/32Amps)
      • Laptop & ISO 17025 Calibration included
      • Fully automated surge and / or burst coupling
      • Free Technical Support & 2 Days Free Transit
      • High accuracy switching technology
      • Both IEC and ANSI coupling methods
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq CDN 3063 coupling decoupling network allows for 32Amp 480Volt three phase, EFT, Surge, and 100kHz ringwave for use with the NSG 3040 and NSG 3060. This testing accessory can be rented individually or together as an NSG3060 CDN3063 combination. This accessory is designed for maximum reliability in a wide range of test setups. 

This immunity test equipment includes both IEC and ANSI coupling methods. It also includes a Phase Rotation indicator ensuring correctly sequenced power connection, preventing damage to equipment under test (EUT). An A2LA accredited calibration is included in the EMC test equipment price.

The CDN3063 allows for coupling for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-12, ANSI C62.41, ANSI C62.45, and UL 1449. Through new technology it offers the ANSI C62.41 coupling method, used to measure and track the mains voltage and simultaneously control the pulse phase angle. We also offer rentals of higher current and voltage networks including the CDN3083-S100 and CDN3083-B100. 

RENTAL

Three Phase Automatic CDN Features:

      • 3-Phase 480V/32amps AC/DC 
      • ISO 17025 Calibration & 2 Days Free Transit
      • For use with Axos 5 & Axos 8 Immunity Systems
      • Controlled via Front Panel of Axos Series
      • Automatic control & Easy to Use with Axos Series
      • Turnkey Solution - Arrives Ready for Testing!

Overview

This three-phase Coupling/Decoupling Network (CDN) for Surge Combination Wave, Ring Wave and EFT/Burst. It is fully compliant with the standard requirements of IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-12, ANSI C62.41 and others. It is automatic, changes phase angles and coupling method via selection from front panel of the Axos generator. This CDN must be used with the Axos series of immunity generators and cannot be used with other manufacturer's equipment.

RENTAL

Coupling/Decoupling Network (CDN) Features 

      • 270 Voltage/ 16Amps 1-Phase EFT & Surge
      • ISO 17025 Calibration included
      • Fully automated Surge and Burst coupling
      • Free Technical Support & 2 Days Free Transit
      • For Use Only with NSG 3060
      • Both IEC and ANSI coupling methods
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq CDN3061 single phase coupler for use with the NSG 3060 Transient Immunity Tester for EFT, Surge and 100kHz Ringwave. This coupling/decoupling network is designed to be used with the NSG 3060 Immunity Test System. It comes with an ISO 17025 accredited calibration, technical support, and two free days transit time. This Teseq product is designed for maximum reliability, a diverse set of test setups, and both IEC & ANSI coupling methods.

The CDN 3061 network features a module for the power quality test required by EN/IEC 61000-4-11 and IEC/EN 61000-4-29. Automated variac accessories are available for connection to the CDN to perform the variation test described in IEC/EN 61000-4-11. Voltage variation test parameters are set via the generator’s user interface. Over temperature protection for the CDN 3061, which allows short term operation at currents exceeding the nominal rating, prevents damage to internal components.

This EMC immunity test product can be rented by itself or part of a system as the NSG 3060 CDN 3061. This Teseq tester provides coupling for both IEC and ANSI standards. The CDN 3061 utilizes the latest electronic component technology which guaranties remarkable phase coupling accuracy which exceeds the standard’s requirements.

RENTAL

The Teseq CDN HSS-2 Coupling Decoupling Network is designed for convenient surge testing with 1.2/50 μs pulses, as defined in EN/IEC 61000-4-5, on unshielded symmetrical high speed telecommunication lines e.g. Ethernet. A2LA accredited calibration is included in the EMC rental equipment price. This product allows testing on ISDN and Ethernet with 10/100BaseT and 1000BaseT. With a surge test voltage of 2 kV is the maximal residual voltage at the AE port only 65 V due to the excellent decoupling network. Additional decoupling elements are not required to protect the auxiliary equipment (AE). 

RENTAL

The CM 3CDSrg from Thermo Keytek is a three phase external coupler for EN IEC 61000-4-5 surge tests for the EMC ProPlus.

RENTAL

In Stock

EMTest CNV504N1.3 coupling/decoupling networks for unshielded  unsymmetrical interconnection signal/data lines. Surge pulses or Ringwave pulses are applied to unshielded unsymmetrical interconnected lines by means of standalone coupling/decoupling networks for 4 signal/data lines.

CNV 504 N1.3 combines three different applications; coupling of Surge pulse via capacitor or gas arrestor and coupling of Ringwave pulses via capacitor being required by EN IEC 61000-4-5 and/or EN IEC 61000-4-12. The required coupling mode, Differential or Common, can easily be selected by means of a simple jumper.

In accordance with EN IEC 61000-4-5 and EN IEC 61000-4-12 pulses are coupled via different coupling elements such as capacitors or gas arrestors depending on the characteristics of the line signals.

RENTAL

CDN Telecom/Communication 1Gbit/s Features

      • Coupling unshielded and shielded lines with up to 4 pairs
      • ISO 17025 Calibration & 2 Days Free Transit
      • Surge test to 3kV (1.2/50us) & Burst Test to 4kV (5/50ns)
      • Residual voltage max. 50V at 3kV Surge 
      • Compatible to PoE and PoE+ requirements
      • Turnkey Solution - Arrives Ready for Testing!

 

Showing 1 to 9 of 10 products