Dito Accessories

Showing 1 to 9 of 18 products

Dito Contact Tip - US Distributor

Dito Contact Discharge Tip 

      • Estimated 6 Weeks Delivery
      • For Use With EM Test Dito
      • Slides on Front of Simulator

Overview

The contact discharge tip for the EM Test Dito electrostatic discharge simulators/gun is available upon request. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States.

Dito Air Tip - US Distributor

EM Test Dito Accessory Features 

      • Estimated 6 Weeks Delivery 
      • For Use With EM Test Dito
      • Slides on Front of Simulator

Overview

The air discharge tip for the EM Test Dito electrostatic discharge simulators/gun is available upon request. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States.

Dito Battery - US Distributor

Dito Test Accessory

      • Estimated 4-6 Weeks Delivery 
      • For Use With EM Test Dito
      • Slides in Simulator

Overview

Buy the Battery for both the EM Test Dito electrostatic discharge simulators/guns are available upon request. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. 

Dito RC Network - US Distributor

Dito Test Network 

      • Estimated 6-8 Weeks Delivery 
      • ISO 17025 Calibration Available 
      • For Use With EM Test Dito

Overview

Custom discharge networks for both the EM Test Dito electrostatic discharge simulators/guns are available upon request. These networks are designed for either the simulator and can cover a large range of testing requirements. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These networks can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities.

Electrostatic Discharge Setup

In Stock

ESD Test Table - IEC 61000-4-2:

      • GCP, HCP, VCP, & Cables w/ Resistors 
      • Can be purchased New/Used
      • For Full IEC 61000-4-2 Setup - Components Available!
      • Free Technical Support & 2 Days Free Transit
      • Some Models - Removable Legs
      • Turnkey Solution - Arrives Ready for Testing!

Overview

Renting and purchasing the electrostatic discharge test setup for EN IEC 61000-4-2 testing allows a quick and cost efficient solution for testing needs. This immunity test setup includes: vertical coupling plane (VCP), horizontal coupling plane (HCP), insulating paper/foil, all wood table with removable legs, ground coupling plane (GCP), and all required accessories for assembly. All of our testing equipment and accessories come with technical support.

This Equipment is quite large and needs to ship via freight.  Select Fedex ground (no charge), and then we will call you for a shipping account number or a separate payment for the shipping costs (approximately $250 each way).

Options:
  • Rent Full Setup - 1 Week $250.00
  • Rent Full Setup - 1 Month $390.00
  • Purchase $4,200.00

Teseq ESD Target Set

ESD Pulse Target:

      • Target for precise ESD pulse measurements
      • Precise gold plated construction
      • ISO 17025 Calibration included
      • Free Technical Support & 2 Days Free Transit
      • Very small insertion loss variation
      • Includes target, attenuator and cable

Overview

The MD 102a, successor to the MD 103 , is a electrostatic discharge calibration target used for verifying waveforms of ESD simulators/guns. All the elements incorporated within the measurement chain must be matched to one another before highly accurate measurements with minimal uncertainties can be contemplated. This test accessory offers distortion-free, flat frequency characteristic up to at least 6 GHz. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities. 

Faster oscilloscopes enable more complete measurements and analyses of the fast ESD pulses but, of course, the rest of the components in the measurement chain must be up to the necessary standard and exhibit the appropriate frequency response. Therefore the MD 102 set offers a complete measuring path from the target to the attenuator up to the high quality coax cable. The whole path has to be left together and should not be disassembled into parts, as the whole coupling path is calibrated in one piece. The MD102 replaces the MD101 & MD103 ESD targets.

ESD Testing Setup/Equipment

In Stock

ESD Test Table - IEC 61000-4-2:

      • GCP, HCP, & VCP
      • Can be purchased New/Used
      • Rental Only - Pricing For Full IEC 61000-4-2 Setup
      • Free Technical Support & 2 Days Free Transit
      • Some Models - Removable Legs
      • Turnkey Solution - Arrives Ready for Testing!

Overview

Renting and purchasing the electrostatic discharge test setup for EN IEC 61000-4-2 testing allows a quick and cost efficient solution for testing needs. This table setup includes: horizontal coupling plane (HCP), insulating paper/foil, all wood table with removable legs, and all required accessories for assembly. All of our testing equipment and accessories come with technical support.

This Equipment is quite large and needs to ship via freight.  Select Fedex ground (no charge), and then we will call you for a shipping account number or a separate payment for the shipping costs (approximately $250 each way).

Options:
  • Rent Full Setup - 1 Week $250.00
  • Rent Full Setup - 1 Month $390.00
  • Purchase $3,400.00

Coupling Plane ESD Setup

In Stock

ESD Vertical Coupling Plane IEC 61000-4-2:

      • Can be purchased New/Used
      • Pricing For Full IEC 61000-4-2 Setup
      • Can be rented/purchased
      • Made to IEC 61000-4-2 Dimensions
      • Turnkey Solution - Arrives Ready for Testing!

Overview

Renting and buy the vertical coupling plane (VCP) for EN IEC 61000-4-2 for electrostatic discharge (ESD) Testing. This part of the common commercial ESD setup comes with wood stand and appropriate size metal sheet which can be put in the stand. This plane is designed to be part of a larger setup. All of our testing equipment and accessories come with technical support.

Options:
  • Rent Weekly VCP $120.00
  • Rent Monthly VCP $170.00
  • Purchase $500.00

IEC 61000-4-2 Cabling

ESD Bleeder Cables & Resistors IEC 61000-4-2:

      • Bleed Off Cables Including HV Resistors
      • Required for a variety ESD setups
      • Pricing For Full IEC 61000-4-2 Setup
      • Can be rented with setup
      • Data Sheets Available upon Request

Overview

Renting and buy the bleed off cables and associated HV resistors for IEC 61000-4-2 electrostatic discharge (ESD) testing. This piece of the ESD setup comes with easy to use connections on both ends of the cables. These can be purchased individually or rented with an entire setup designed for commercial ESD testing.

Showing 1 to 9 of 18 products