Description
Overview
The EM Test VDS200N, LD200N, UCS200N, & ACC provides a full ISO7637 test solutions and comes with an ISO 17025 accredited calibration. This system is controlled through software through the laptop, which has the required information already installed. . This system is a combination of sevearl different Automotive EMI products providing a complete test system. Each one of the major components can be rented individually, comes with a laptop, and is calibrated to ISO 17025. We offer rentals, as short as a week, providing a cost effective solution for a short term testing need.
Data SheetUser ManualRemote Control ManualSpecifications
VDS200N |
|
Common Standards |
ISO 7637-2 pulses 2b and 4, ISO 16750, GMW3172 and many others |
Output Voltage |
0V – 60V |
Output Current |
0A – 15A, continuous |
Peak Current |
15A |
Frequency Range |
DC to 100kHz |
Rise Time |
5ms – 10ms (10-90%) |
Pulse Duration |
40-400ms (10-10%) |
Internal Resistor |
.5 ohm – 38 ohm, selectable in 0.1 ohm steps |
Repetition Rage |
Min. 30s |
Freestyle Mode |
|
Rise Time |
10µs – 10ms |
Pulse Duration |
10ms – 1.200 ms |
Internal Resistor |
Built in 0.5 – 38ohm , selectable in 0.1 ohm steps |
Weight |
25kg (55lbs) |
Dimensions |
500mm x 450mm x 290mm (19.68 x 17.71 x 11.41) |
UCS 200N | |
Common Standards |
SAE J1113, JASO, ISO 7637, GMW3172 Nissan, and many other car manufacturer standards |
Built in Coupler |
80V, up to 50 amps, 100 amps for 500ms |
ISO 7637 Waveforms |
1,2a,3a,3b,6 |
Burst Tests |
ISO 7637 waveforms 3a,3b and others |
Test Voltage |
25V – 1000V ± 10% |
Rise Time |
5ns ± 1.5ns |
Pulse Duration |
150ns ± 45ns |
Source Impedance |
Zq = 50 ohm |
Trigger of bursts |
Automatic, manual, external |
Burst duration |
T4 = 0.1ms – 999.9ms |
Repetition Rate |
T5 = 10ms – 9,999ms |
Spike Frequency |
F = 0.1kHz – 200kHz |
Test Duration |
T = 0:01min – 999:59min T > 999:59minàEndless |
Micropulse Test |
ISO 7637 waveforms 1,2a,6 and others |
Test Voltage |
U = 20V – 600V ± 10% (Peak voltage and polarity as per selected standard) |
Repetition Rate |
0.2s – 99.0s |
Free Style |
|
Rise Time |
1us – 10us in steps of 1 us |
Pulse Duration |
50us – 10,000us |
Internal Resistance |
2 ohm – 100 ohm in steps of 5 ohm; 200 ohm, 400 ohm and 450 ohm |
Weight |
20kg (44.09lbs) |
Dimensions |
19”/3HU |
Packing List/Accessories
Included with Rental
Below you will find a list of common accessories that you can expect to be delivered with the equipment. This is a generic standard list and should you require an exact connector or accessory please contact us prior to order shipping. The laptop that comes with the battery supply generator also come with ISO control software allowing for a quick, turnkey solution.
VDS 200N
- Battery Simulator/Generator
- Power Cable
- USB Interface Cable
- Printed Manual
- Calibration Documentation
- Short Introduction
- USB Drive with License & Software
- 125V Plug
- (2) MC Connector Cable (red & black)
- (2) Clamps Red & Black
- Red Shipping Case
LD 200N
- Load Dump Generator
- Power Cable
- (4) Safety Lab Cables with Alligator Clips
- Printed Manual
- Calibration Documentation
- Software License
- Software on USB Stick/Drive
- (4) MC Connectors Sets
- USB Cable
- 9pin serial cable
- Shipping Case
UCS 200N
- Automotive EFT Generator
- Power Cable
- Printed Manual
- Calibration Documentation
- Software License
- (4)Recessed Banana Jack Cords with Clips
- ISO.control Software on USB Stick
- USB Cable
- (4) MC Connectors
- Pelican Case
Video
EM Test - Automotive Conducted Immunity Generators
Description: This video provides an overview on the EM Test conducted immunity test system. The three major components of this automotive EMC test equipment are the LD 200N, UCS 200N, and VDS 200N. This video provides and overview of these test systems including, ISO 7637-2 waveforms covered, accessories that come with equipment, setup, connecting all equipment, and troubleshooting. It also, provides insight into how to setup the software to allow remote testing to be conducted through laptop.
Testimonials
I would recommend Transient Specialists. Transient Specialists always provides quality products within the established timeframes. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.
Scott D., TUV SUD Canada
Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!
John H., Gates Air, Inc.
Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.
Adam P., Clark Testing
Working for a testing company I deal with renting equipment all the time. Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.
Richard T., National Technical Systems