Contact Us
FCC Part 15 Pre-Compliance Emissions Kit - Rent Analyzer & LISN
Related Emissions Equipment
Description
Overview
This bundle or package of products is designed for pre-compliance emissions testing to FCC Part 15. This includes a Siglent SSA 3032/3075 spectrum analyzer, Tekbox TBFL1 transient limiter, and EMCO/ETS-Lindgren LISN designed for a maximum of 10 Amps EUT. The Siglent spectrum analyzer can also be rented with the near field probe kit allowing for precompliacne radiated emissions testing as well.
Siglent Data Sheet EMCO LISN ManualSpecifications
| Siglent SSA 3032 |
|
| Frequency Range |
9kHz-3.2GHz |
|
Resolution Bandwidth (RBW) |
1 Hz~1 MHz, in 1-3-10 sequence |
|
Displayed Average Noise Level |
-161 dBm/Hz, Normalize to 1 Hz (typ.) |
|
Phase Noise |
< -98 dBc/Hz@1 GHz, 10 kHz offset |
|
Amplitude Precision |
< 0.7 dB |
|
ETS Lindgren/EMCO LISN |
|
|
Type |
50Ω / 50 μH + 5Ω (CISPR), 50 μH & 250 μH(ANSI) |
|
Frequency Range |
9 kHz to 30 MHz |
|
Insertion Loss (Voltage Division Factor) |
9 kHz - 150 kHz <6.5 dB to <0.5 dB (increasing linearly with log of freq) 150 kHz - 30 MHz <0.5 dB |
|
Isolation |
9 kHz - 150 kHz >10 dB to >60 dB (increasing linearly with log of freq) 150 kHz - 30 MHz >60 dB |
|
Voltage Rating |
270 VoltsAC (rms), 380 VoltsDC (Line to Ground) |
|
Current Rating |
20 AmpsAC (rms), 14 AmpsDC |
| TekBox Transient Limiter |
|
|
Attenuation: |
10 dB – 0.5/+1.2 dB in-band (9 kHz to 600 MHz) |
|
Frequency range: |
9 kHz – 600 MHz |
|
Maximum continuous RF input power: |
5W (+37 dBm) in-band |
|
Maximum DC input voltage: |
± 20V |
|
Input matching, linear operating range: |
9 kHz - 600 MHz < - 16 dB |
|
Output matching, linear operating range: |
9 kHz - 600 MHz < - 23 dB |
|
Linear operating range: |
Up to 0 dBm input level, in-band |
|
Limiting threshold: |
+11 dBm (@ 37dBm input level) |
|
Input connector: |
N-female |
|
Output connector: |
N-male |
|
Dimensions: |
156 mm x 26 mm x 26mm |
|
Weight: |
170 g |
