ESD3000 Rent & Buy Used - EMC Partner 16kV ESD Simulator Gun

EMC Partner ESD Tester

ESD3000 Rent & Buy Used - EMC Partner 16kV ESD Simulator Gun

Availability: In Stock - Order by 3PM Ships Today!

ESD Gun Features

      • Air Discharge - 16kV Contact-discharge - 10kV (100V Steps)
      • Used Purchase Includes 60 Day Warranty
      • IEC 61000-4-2 ESD Solution, DM1 - 150pF/330Ω Network
      • Adjustable +/- Polarity and Test Accessories Available 
      • Battery Powered, Durable, Capabilities with Network for 30kV
      • Many Reprogrammed Standards & Software Included!
      • All Rentals - ISO 17025 Cal & 2 Days Transit Time

Overview

The ESD3000 with the DM1 (Discharge Module 50pF/330Ω Network) by EMC Partner is cordless, battery powered, ESD Gun for air discharge testing to 16kV and 10kV contact discharge testing designed for IEC 61000-4-2. Buy it used and rent it with a diverse set of discharge modules/discharge networks which are easily interchanged depending upon testing needs. The DN, (DN-1, DN-2, etc.) provide testing to 30kV with adapter, the DM distinction provides testing to only the standard 16kV Air & 10kV Contact. A variety of resistance capacitance (RC) networks exist for both voltages. Purchase and sale of the simulator come with ISO 17025 calibration.

The design of the interface for this ESD Test Equipment offers the user a quick way to change test parameters with one hand. EMC Partner software comes with the equipment allowing for remote control and reports to be generated. It can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.

The EMC Partner test equipment can be run with AA batteries or rechargeable battery pack, which are provided with the rental. Electronic polarity reversal, including alternating polarity, is provided with this ESD simulator. This tester offers an easy to use solution for EN IEC 61000-4-2, ANSI C63.16 and many others electrostatic discharge related standards.

$295.00

Buy/Rent ESD3000 Modules & Networks

ESD Gun Features

      • Air Discharge - 16kV Contact-discharge - 10kV (100V Steps)
      • Used Purchase Includes 60 Day Warranty
      • IEC 61000-4-2 ESD Solution, DM1 - 150pF/330Ω Network
      • Adjustable +/- Polarity and Test Accessories Available 
      • Battery Powered, Durable, Capabilities with Network for 30kV
      • Many Reprogrammed Standards & Software Included!
      • All Rentals - ISO 17025 Cal & 2 Days Transit Time

Overview

The ESD3000 with the DM1 (Discharge Module 50pF/330Ω Network) by EMC Partner is cordless, battery powered, ESD Gun for air discharge testing to 16kV and 10kV contact discharge testing designed for IEC 61000-4-2. Buy it used and rent it with a diverse set of discharge modules/discharge networks which are easily interchanged depending upon testing needs. The DN, (DN-1, DN-2, etc.) provide testing to 30kV with adapter, the DM distinction provides testing to only the standard 16kV Air & 10kV Contact. A variety of resistance capacitance (RC) networks exist for both voltages. Purchase and sale of the simulator come with ISO 17025 calibration.

The design of the interface for this ESD Test Equipment offers the user a quick way to change test parameters with one hand. EMC Partner software comes with the equipment allowing for remote control and reports to be generated. It can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.

The EMC Partner test equipment can be run with AA batteries or rechargeable battery pack, which are provided with the rental. Electronic polarity reversal, including alternating polarity, is provided with this ESD simulator. This tester offers an easy to use solution for EN IEC 61000-4-2, ANSI C63.16 and many others electrostatic discharge related standards.

Data Sheet User Manual
Common ESD Standards  EN IEC 61000-4-2 & ANSI C63.16
Voltage Range Air Discharge  +/- 0.2kV to 16kV
Voltage Range Contact Mode +/- 0.2kV to 10kV
RC Network 150 pf/ 330 ohm

Resolution  100V
Construction fully portable, no additional basic unit
Control LCD and 6 menu buttons, 1 trigger button
Maximum voltage 16 kV or 30 kV, depending on modules chosen
Discharge polarity positive, negative, alternating
Discharge modes contact discharge (CD) and air discharge (AD)
Discharge frequency CD max. 20 Hz, (pulse every 0.05, 0.1, 0.2 … 99 s)
Discharge frequency AD ≥ 30 Hz or more, for ex. with DM1, DN1, other
Counter pre-selectable, 1 to 29999
Discharge detection selectable, count pulses or count discharges
Holding time ≥ 5 s
Trigger manual, automatic, remote
Ramps voltage, polarity
Reporting with TEMA automatic report sequence, amplitude, polarity
Power supply 10 x AA rechargeable batteries or mains
Weight equipped 1050 g, with battery pack, DM1 and AD tip
Requires at least a DM module, or a DN module + RM32
Repetition Rate  Single shot mode, variable 0.05 to 30s
Remote Control  Yes – D-sub
Programmable Voltage ramping and polarity
Battery Recharge Time  Time 10 x UM-3/AA batteries
Usable During Recharge  Yes
Weight 870 grams, 1.9 pounds
Dimensions 33×7.6×7.6 cm, 16x3x3 inches

Buy Used ESD3000 ESD Simulators & Accessories

There are a variety of testing accessories that are included with the simulator itself and that are available for purchase.

Take advantage of 60 warranty no available on Ebay.

 

Included with standard rental/purchase of ESD Simulator:

    • ESD Simulator/Gun
    • Network (DN) or Module (DM)
    • Calibration Documentation
    • RM3 Module (only for 30kV)
    • Air Discharge Tip
    • Contact Discharge tip
    • Metal Sphere (only for 30kV)
    • Ground Cable with Clamp
    • Battery Charger
    • Power Cord
    • HTE0600 (only for 30kV)
    • 10 AA Rechargeable Batteries (Installed)
    • User Manual
    • Calibration Certificate
    • Rs 232 Connector
    • White Case 

ESD 3000 Rental ModuTesting Accessories ESD Simulator:

Item # Description
RM32

RM 32 Relay module required for 30kV testing

DN1

IEC 61000-4-2 to 30kv, requires RM32 - 150 pf/330 ohms

DN2

ISO TR10605 to 30kv, requires RM32 - 330 pf/2K ohms

DN3

ISO TR10605 to 30kv, requires RM32 - 150 pf/2K ohms

DN6

VW & Chrysler to 30kv, requires RM32 - 330 pf/330 ohms 

DM4

Network for Mil-Std 464, Mil std-883, GR78 - 100 pf/1500 ohms

Modules by Standard Chart

Accessories for Modules Chart

Transient Specialists: ESD Simulator Comparison 

Description: This overview video provides a comparison or review, of a variety of simulators for IEC 61000-4-2. It mentions

features of Mz-15 Minizap, Dito, ESD3000, and NSG 435 including setup and advantages for each. This video covers ESD

testers designed for IEC 61000-4-2 (150pF/330Ohm network) to 16kV.s Some considerations discussed include scree,

modifying testing parameters, used market considerations, and others. 

HV Technologies: ESD Tester Demonstration 

Description: This overview video, by HV Technologies, describes how to use the ESD3000 ESD Gun. It walks through

how you will receive the test equipment, including accessories, then how to manipulate testing parameters with

the touch screen. Finally, it shows how to change or add different networks or test accessories to the simulator.

I would recommend Transient Specialists. Transient Specialists always provides quality products within the established time frames. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.

Scott D., TUV SUD Canada

 

Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!

John H., Gates Air, Inc.

 

Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.  

Adam P., Clark Testing

 

Working for a testing company I deal with renting equipment all the time.  Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.

Richard T., National Technical Systems 

Comparable EMC Systems

Capabilities & Voltage +/- 16.5kV Air & 9kV Contact Discharge +/-16kV Air & 10kV Contact Discharge +/-16kV Air & 8kV Contact Discharge +/-16.5kV Air & 10kV Contact Discharge
Manufacturer Teseq (Ametek) EMC Partner Thermo Fisher Scientific (Keytek) EM Test (Ametek)
Steps/Resolution 100 Volts 100 Volts 10 Volts 100 Volts
Networks/Accessories Replacement Parts Custom, New, & Used Custom, New, & Used Mainly Used, Some Difficult to Find Custom, New, & Used
System Features Large Screen & Easy to Use Interface System 30kV Capable (Expandable) & AA Battery Powered Rugged Design, Industry Standard, & Used Market Reverse Current Monitoring & Ergonomic Design