IEC 61000-4-11:2004 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations 

IEC 61000-4-11:2004 Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations 

EN IEC 61000-4-11 sets the immunity test methods and range for equipment connected to low-voltage power supply networks for voltage dips, short interruptions, and voltage variations. It covers equipment not above 16A/phase for connection to 50 or 60 Hz A.C. EN IEC 61000-4-11 falls into the greater structure of EN IEC 61000 which covers broader EMC concepts. Voltage dips and short interruptions are caused by faults in the network, primarily short circuits, in installations or by sudden large changes of load. In certain cases, two or more consecutive dips or interruptions may occur. Voltage variations are caused by continuously varying loads connected to the network against a certain benchmark. This standard can be purchased at the IEC WebstoreEN IEC 61000-4-11 Dips & Interruption Waveform
EN IEC 61000-4-11 standard categorizes three levels of testing and can be verified by Dips and Interrupts EMC Test Equipment. The three different classes are defined further in the standard allowing testing to be conducted accordingly. This standard does not define testing with pass/fail criteria but on performance criterion, similar to that of other IEC standards.This standard does not cover equipment for connection to 400 Hz A.C. EN IEC 61000-4-11 places regulation on the environment, limits, testing and measurement techniques, installation and mitigation guidelines, and many other criteria.  

Voltage Dips Level 61000-4-11

EN IEC 61000-4-11 sets the requirements for EMC test equipment to test for voltage dips, short interruptions, and voltage variations. It specifies preventing the emissions of heavy disturbances on power supply and providing voltage dip equal or more severe then required by the standard. We offer rental products by Teseq, EMC Partner, EM Test, and Thermo-Keytek. We also provide a variety of rental accessories for our equipment allowing customers to meet a variety of requirements. The most commonly rented equipment to simulator this event are the Profline, NSG 3060, UCS500n7, TRA3000, and EMC Pro. These EMI dips and interrupts products come with an A2LA accredited calibration and free technical support included with the rental. Dips & Interrupts Rental Products Picture

EN IEC 61000-4-11 - Dips & Interruptions Immunity

RENTAL

TRA3000 C Rental - Common Mode Generator - IEC 61000-4-16

The EMC Partner TRA3000 C  Rental is an EMI test generator is an all in one unit testing solution for both the long/short tests. This EMC Partner product includes single phase CDN for EN IEC 61000-4-16 and external box for the 300 volt short test. A2LA accredited calibration is included in the EMC rental equipment price. This products "Plug and Play" architecture allows for system to automatically identify hardware then re-configure testing menu to reflect the change.

This Immunity Test Generator has been created for CE transient testing as well as fulfilling IEC basic standard requirements. The TRA 3000C includes both an Ethernet Port for control communication and test reporting that includes laboratory environmental conditions.This EMC tester is a environmentally conscience solution with low power consumption, less noise, and less heat. 

The TRA3000C is a single unit testing system for EN IEC 61000-4-4EN IEC 61000-4-5EN IEC 61000-4-11CE Mark, and EN IEC 61000-4-16. This product offers many solutions for common standards providing customers with flexibility. As an added bonus EMC Partner does not require proprietary software all reports are HTML based and can be viewed with web browsers.

RENTAL

IMU 4000 Rental - EMC Partner 4kV Generator EFT, Surge, & Dips (Optional IEC 61000-4-16)

The EMC Partner IMU4000 EMI (Optional: Common Mode) test generator is an all in one unit testing solution for testing to EFT to 4.4kV and Surge to 4.1kV with built-in single phase coupler, and Dips under 6 amps. A2LA accredited calibration is included in the EMC rental equipment price. This products "Plug and Play" architecture allows for system to automatically identify hardware then re-configure testing menu to reflect the change.

This Immunity Test Generator has been created for CE transient testing as well as fulfilling IEC basic standard requirements. The IMU 4000 includes both an Ethernet Port for control communication and test reporting that includes laboratory environmental conditions.This EMC tester is a environmentally conscience solution with low power consumption, less noise, and less heat. 

The IMU4000 is a single unit testing system for EN/IEC 61000-4-4, EN/IEC 61000-4-5EN/IEC 61000-4-11and CE Mark. With the common mode available for testing to EN/IEC 61000-4-16 this design offers flexibility depending on testing needs. As an added bonus EMC Partner does not require proprietary software all reports are HTML based and can be viewed with web browsers.

RENTAL

TRA3000 Rental - EMC Partner Immunity Generator (Optional Common mode & Dips)

The EMC Partner TRA3000 EMI pulse generator (Optional: Common Mode or Dips/Interrupts) is an all in one unit testing solution for testing EFT to 4.4kV and Surge to 4.1kV with built-in single phase coupler. A2LA accredited calibration is included in the EMC rental equipment price. This products "Plug and Play" architecture allows for system to automatically identify hardware then re-configure testing menu to reflect the change.

This Immunity Test Generator has been created for CE transient testing as well as fulfilling IEC basic standard requirements. This EMC Patner pulse generator includes both an Ethernet Port for control communication and test reporting that includes laboratory environmental conditions. It is a environmentally conscience solution with low power consumption, less noise, and less heat. 

The TRA3000 is a single unit testing system for EN/IEC 61000-4-4, EN/IEC 61000-4-5and CE Marking. With the common mode or dips/interrupts available for testing to EN/IEC 61000-4-11 and EN/IEC 61000-4-16, this design offers flexibility depending on testing needs. As an added bonus EMC Partner does not require proprietary software all reports are HTML based and can be viewed with web browsers.