Profline 2105 Rental - Teseq 5KVA Harmonics & Flicker Test Set EN/IEC 61000-3-2

RENTAL

Profline 2105 Rental - Teseq 5KVA Harmonics & Flicker Test Set EN/IEC 61000-3-2

Availability: In Stock - Order by 3PM Ships Today!

The Teseq Profline2105 by Teseq has a stable and programmable 5KVA power supply and line conditioner (Cal Inst 5000ix) used for measuring single phase harmonics (EN/IEC 61000-3-2) and flicker (EN/IEC 61000-3-3) testing. The NSG1007 power supply is included in the Profline2105 rental. An A2LA accredited calibration is included in the EMC rental equipment price. 

This Harmonics and Flicker Emissions Tester has a fully programmable AC power source with arbitrary waveform generator capable of being used in stand-alone mode in various applications for IEC 61000-4-X at pre or full-compliance. The measurement of flicker requires a fixed, stable source impedance the Profline system provides a precision power source to accurately simulate this impedance by careful control of the relationship between voltage and current. This IEC 61000-3-3 rental solution eliminates the need for a costly physical impedance.

The Profline 2105 is a reliable solution for testing to standards EN/IEC 61000-3-2, EN/IEC 61000-3-3, EN/IEC 61000-4-11, EN/IEC 61000-4-13, and EN/IEC 61000-4-14. Measurements are made using precision, no burden, active hall-effect current transformers connected via a dedicated cable to a multichannel fast Data Acquisition Card (DAQ) fitted inside a PC. One voltage and three current measuring channels are used to make simultaneous measurement of both current and voltage. 

The Teseq Profline2105 by Teseq has a stable and programmable 5KVA power supply and line conditioner (Cal Inst 5000ix) used for measuring single phase harmonics (EN/IEC 61000-3-2) and flicker (EN/IEC 61000-3-3) testing. The NSG1007 power supply is included in the Profline2105 rental. An A2LA accredited calibration is included in the EMC rental equipment price. 

This Harmonics and Flicker Emissions Tester has a fully programmable AC power source with arbitrary waveform generator capable of being used in stand-alone mode in various applications for IEC 61000-4-X at pre or full-compliance. The measurement of flicker requires a fixed, stable source impedance the Profline system provides a precision power source to accurately simulate this impedance by careful control of the relationship between voltage and current. This IEC 61000-3-3 rental solution eliminates the need for a costly physical impedance.

The Profline 2105 is a reliable solution for testing to standards EN/IEC 61000-3-2, EN/IEC 61000-3-3, EN/IEC 61000-4-11, EN/IEC 61000-4-13, and EN/IEC 61000-4-14. Measurements are made using precision, no burden, active hall-effect current transformers connected via a dedicated cable to a multichannel fast Data Acquisition Card (DAQ) fitted inside a PC. One voltage and three current measuring channels are used to make simultaneous measurement of both current and voltage. 

Common Standards

EN/IEC 61000-3-2, EN/IEC 61000-3-3, EN/IEC 61000-4-11,

EN/IEC 61000-4-13, & EN/IEC 61000-4-14 

Power Source

5kVA – single phase 0-270V, 18.5A

Synthesized impedance

Per IEC 725

Data Acquisition

4 channels

Sampling Rate

>200kHz (4000 times fundamental) per channel

Harmonics Analysis

 

  Range

Fundamental to 40th harmonic

  Fundamental

±0.05% FS ±0.05% / kHz

  Harmonics

±0.1% ±0.1% / kHz

  Measurement Window

Real time FFT of 200msec.

  Smoothing

1.5 sec.

Flicker Analysis

 

  Range

0.4- 5 Pst

  Accuracy

3%

  Resolution

0.01

  Integration Time

10 mins

  Plt

0.4 - 5

  dmax

0.1 – 100%

  dc

0.1 – 100%

  dt

0.1 – 100%

  dt over 3.3%

10 – 5000 ms

Other Immunity Testing

 

  IEC 61000-4-11

AC voltage dips, interrupts and variations with optional EOS1

  IEC 61000-4-13

Immunity to harmonics and interharmonics

  IEC 61000-4-14

Immunity to voltage fluctuations

  IEC 61000-4-17

Ripple on DC input power ports

Weight

5 kg, 11 pounds

Dimensions

9x43x56 cm, 3.5x17x22 inches

I would recommend Transient Specialists. Transient Specialists always provides quality products within the established timeframes. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.

Scott D., TUV SUD Canada

 

Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!

John H., Gates Air, Inc.

 

Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.  

Adam P., Clark Testing

 

Working for a testing company I deal with renting equipment all the time.  Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.

Richard T., National Technical Systems