Teseq CDN 3061 Rental - Single Phase CDN Surge & EFT

NSG 3060 Auto 1-Phase CDN

Teseq CDN 3061 Rental - Single Phase CDN Surge & EFT

Availability: In Stock - Order by 3PM Ships Today!

Coupling/Decoupling Network (CDN) Features 

      • 270 Voltage/ 16Amps 1-Phase EFT & Surge
      • ISO 17025 Calibration included
      • Fully automated Surge and Burst coupling
      • Free Technical Support & 2 Days Free Transit
      • For Use Only with NSG 3060
      • Both IEC and ANSI coupling methods
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq CDN3061 single phase coupler for use with the NSG 3060 Transient Immunity Tester for EFT, Surge and 100kHz Ringwave. This coupling/decoupling network is designed to be used with the NSG 3060 Immunity Test System. It comes with an ISO 17025 accredited calibration, technical support, and two free days transit time. This Teseq product is designed for maximum reliability, a diverse set of test setups, and both IEC & ANSI coupling methods.

The CDN 3061 network features a module for the power quality test required by EN/IEC 61000-4-11 and IEC/EN 61000-4-29. Automated variac accessories are available for connection to the CDN to perform the variation test described in IEC/EN 61000-4-11. Voltage variation test parameters are set via the generator’s user interface. Over temperature protection for the CDN 3061, which allows short term operation at currents exceeding the nominal rating, prevents damage to internal components.

This EMC immunity test product can be rented by itself or part of a system as the NSG 3060 CDN 3061. This Teseq tester provides coupling for both IEC and ANSI standards. The CDN 3061 utilizes the latest electronic component technology which guaranties remarkable phase coupling accuracy which exceeds the standard’s requirements.

Coupling/Decoupling Networks - Teseq

Coupling/Decoupling Network (CDN) Features 

      • 270 Voltage/ 16Amps 1-Phase EFT & Surge
      • ISO 17025 Calibration included
      • Fully automated Surge and Burst coupling
      • Free Technical Support & 2 Days Free Transit
      • For Use Only with NSG 3060
      • Both IEC and ANSI coupling methods
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq CDN3061 single phase coupler for use with the NSG 3060 Transient Immunity Tester for EFT, Surge and 100kHz Ringwave. This coupling/decoupling network is designed to be used with the NSG 3060 Immunity Test System. It comes with an ISO 17025 accredited calibration, technical support, and two free days transit time. This Teseq product is designed for maximum reliability, a diverse set of test setups, and both IEC & ANSI coupling methods.

The CDN 3061 network features a module for the power quality test required by EN/IEC 61000-4-11 and IEC/EN 61000-4-29. Automated variac accessories are available for connection to the CDN to perform the variation test described in IEC/EN 61000-4-11. Voltage variation test parameters are set via the generator’s user interface. Over temperature protection for the CDN 3061, which allows short term operation at currents exceeding the nominal rating, prevents damage to internal components.

This EMC immunity test product can be rented by itself or part of a system as the NSG 3060 CDN 3061. This Teseq tester provides coupling for both IEC and ANSI standards. The CDN 3061 utilizes the latest electronic component technology which guaranties remarkable phase coupling accuracy which exceeds the standard’s requirements.

Data Sheet Application Guide - CDNs

Common Standards

EN/IEC 61000-4-4EN/IEC 61000-4-5EN 61000-4-12

ANSI C62.41C62.45UL 1449

External Single Phase CDN 3061:

Other optional CDN’s (CDN 3063, 3083) are available also

  AC Voltage             

30-270 VAC

  AC Current

16 A, Max 25A for 10 min.

  DC Voltage

0-270 VDC, Max


  DC Current

16 A, Max 25A for 10 min.

Dips and Interrupts:

INA 6502 external variac is available as a separate option

Technical information

 

  EUT supply: 1-phase (P/N/PE) 

 EUT VAC30 to 270 VAC rms, line to neutral, 50/60 Hz (below 30 V synchronization not guaranteed, asynchronous mode only) EUT VDC 0 to 270 VDC DC - 65 Hz with no EUT loss, 400 Hz max. with EUT power loss

 EUT current:

 1 x 16 A rms continuous (over temperature protection) 1 x 25 A rms for approx. 10 min (over temparature protection)

Burst voltage:

 Up to 4800 V

 Surge voltage:

 Up to 6600 V

 Connections: Front panel 

 HV-surge pulse input from generator (Fischer connector) EFT connector from generator (SHV connector) Ground/PE connection

Rear panel

 Cable connector for EUT supply input and output

 Instrument supply: 

 85 to 265 VAC, 50 / 60 Hz

 Decoupling attenuation

 Residual pulse voltage on EUT power supply inputs 15% max. Residual voltage on non-pulsed power supply inputs 15% max.

Included with Rental Of Teseq CDN 3061

Below you will find a list of common accessories that you can expect to be delivered with the equipment. This is a generic standard list and should you require an exact connector or accessory please contact us prior to order shipping. We A detailed list of these can be found on the "All Accessories" tab. 

 

CDN 3061

  • CDN 3061 #
  • Power Cord
  • EUT Power IN  Cord
  • EUT Power OUT Cord
  • HV Burst SVH to SVH Cord
  • 25 Pin System Cord - CDN to Generator
  • (2) Surge Fischer/Fischer Cords
  • Ground Strap
  • Black Plastic Screw( attached to front)
  • Calibration Documents
  • EUT OUT Connector
  • EUT IN Connector
  • Shipping Case 28x26x18

 

    Models

    • CDN 3061-C16 - Combined EFT and CWS
    • CDN 3061-C16-PQM - Combined EFT, CWS and Dips, Interrupts and Variations
    • CDN 3061-S16 - For combined wave surge (CWS) only

     

    Included Components

    • INA 3003 - System Interface cable 0.5 m
    • INA 3007 - 40 cm SHV coax cable (only with C versions)
    • INA 3008 - 2 x 40 cm RG213 coax cable
    • WIN 3000 CD
    • Grounding set
    • User manual
    • Calibration certificate

     

    Optional Test Accessories

    • INA 3238 - Measuring - calibration adapter for EFT
    • INA 166 - 5 U brackets for rack mounting
    • CAS 3025 - Burst/EFT calibration terminator/attenuator set
    • MD 200A - Differential HV probe 7 kV
    • MD 300 - Current probe 5 kA
    • WIN 3000-SRD - Professional version of PC software featuring real time reporting, sequencing and dialogs