Electrical Fast Transients/Burst Immunity Rentals
Electrical Fast Transients/Burst Immunity Rentals
EN/IEC 61000-4-4 - relates to electrical fast transient (EFT) / burst testing, providing immunity requirements and testing procedures. The goal of this International Electrotechnical Commission (IEC) standard is a reproducible guide to evaluate equipment when exposed to fast transient/bursts on supply, signal, and control and earth ports. This Standard can be purchased on the IEC Webstore websiteThe most recent 2012 version 3 cancels out previous publications and helps to clarify simulator specifications, test criteria, and testing. Another term for this testing, burst testing, is because of the quickly reoccurring surges. It defines test voltage waveform, range of test levels, test equipment, verification procedures of test equipment, test set-up, and test procedures. Given the fast rise time of this occurrence grounding during testing is crucial.  EN/IEC 61000-4-4 Burst/EFT Wave Shape
IEC 61000-4-4 separates testing criteria based upon the environment in which the EUT is expected to operate. There are 5 different classification that require different test levels. Test level one is a well-protected environment with shielded power lines, most often a computer room. Level two is a protected environment which most often a control room for industrial electrical plants. The third and fourth levels being typical and severe industrial environments. The final level is based on the special situation or environment that the equipment operates. When conducting this type of testing it is crucial to reference the standard to confirm test levels.

 

The test setup for this standard requires a ground reference plane, coupling device, decoupling device (if needed), and the EFT/Burst test generator. When attempting to replicate the setup for electrical fast transients per this IEC standard it beneficial to have a preexisting setup, specifically for IEC 61000-4-2 (ESD). The electrostatic discharge setup has a large amount of cross over for burst testing and is an ideal starting point.

For electrical fast transients (EFT) equipment rentals we offer a diverse set of products to meet testing needs. We carry products from all the major suppliers including Teseq, EM Test, EMC Partner, Haefely, and many others. We also offer rentals of CDNs and other accessories needed to preform EFT testing. The more common rental units for EFT testing include the NSG 3060, Axos 8, NX5, and UCS500n7. These EMI EFT products come with an A2LA accredited calibration and free technical support included with the rental.

EN IEC 61000-4-4 EFT Rental Products

IEC 61000-4-4 - EFT/Burst Immunity Rentals

Showing 1 to 9 of 10 products

RENTAL

Thermo Keytek ECAT E4554 kV - 3 Phase EFT, Surge and Ringwave Coupler / Decoupler

Thermo Keytek three phase ac line coupler/decoupler for surge testing to 10kV and EFT testing with the ECAT system, requires the E103 controller.

RENTAL

EFT CCL - Capacitive Coupling Clamp For EFT Testing Per IEC61000-4-4

This Capacitive coupling clamp by Thermo-Keytek is designed for EFT pulses on I/O lines per EN/IEC 61000-4-4

SALE/RENTAL

3 Phase Surge, Ringwave, and EFT Coupler/Decoupler ECAT System

Thermo Keytek module for ECATS.  The E 4554 A is three-phase ac line coupler/decoupler for surge and EFT modules requires the E103 controller, and a transient generator module, the E501b surge module, E411 EFT module or the E503 ringwave module can be rented / purchased at an additional cost.

Add to cart

SALE/RENTAL

ECAT E421 Rent & Buy Used - Thermo Fisher/Keytek 8kV EFT/Burst per IEC 61000-4-4

The ECAT E421 made by Thermo Fisher Scientific / Keytek is designed for electrical fast transients (EFT) and Burst testing to 8kV. This Thermo Fisher Scientific EMI immunity test equipment comes with an A2LA accredited calibration included with rental or purchase. The ECAT E421 plug-in module requires the ECAT E103 control unit.

This Thermo Fisher Scientific / Keytek EFT/Burst Test Equipment provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with the ECATE421 be conducted efficiently without re-initializing the EUT between tests. This unit can be easily integrated with preexisting ECAT system by sliding the E421 into open bay of the ECAT E103 control unit.

The ECAT E421 is designed to test to EN/IEC 61000-4-4. All ECAT E421s are upgraded to meet the latest version of IEC 61000-4-4. The modular system provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. This cost effective solution is in excellent working conduction and software can be acquired with purchase.

Add to cart

SALE/RENTAL

ECAT 411 EFT/Burst 4.4kV Rent & Buy Used - IEC 61000-4-4

The ECAT E411 made by Thermo Fisher Scientific / Keytek is designed for electrical fast transients (EFT) and Burst testing to 4.4kV. This Thermo Fisher Scientific EMI immunity test equipment comes with an  A2LA accredited calibration included with rental or purchase. The E411 plug-in module requires the ECAT E103 control unit.

This Thermo Fisher Scientific / Keytek EFT/Burst Test Equipment provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with the E411 be conducted efficiently without re-initializing the EUT between tests. This unit can be easily integrated with preexisting ECAT system by sliding the E411 into open bay of the ECAT E103 control unit.

The ECAT E411 is designed to test EN/IEC 61000-4-4 ed.3 and ANSI C37.90. All of our E411 are upgraded to meet the latest version of IEC 61000-4-4. The modular system provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. This cost effective solution is in excellent working conduction and software can be acquired with purchase.

Add to cart

SALE/RENTAL

8kV EFT ECAT System Rent & Buy Used E421 & E4554 - Thermo Fisher/Keytek

The ECAT E103, E421 and E4554 by Thermo Fisher Scientific / Keytek is designed to test to a variety of immunity standards requiring 8kV EFT with 3 phase AC power coupler/decoupler to 480V, 32A. This ECAT System comes with an A2LA accredited calibration and free technical support included with rental. This rental is a combination of the ECAT E103 control unit and E421 and E4554 modules.

This Thermo Fisher Scientific / Keytek EMC immunity generator provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with to be conducted efficiently without re-initializing the EUT between tests. The ECAT E421 can be rented individually or in combination with the ECAT E103. 

This ECAT system is designed to test EN/IEC 61000-4-4, and many other immunity standards that have a high voltage EFT component. TThe modular system of this Thermo Fisher / Keytek product provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. The E103 and E421, E4554 combination can be controlled via front panel or through computer using Keytek software.

Add to cart

SALE/RENTAL

Three Phase Surge, EFT, & Ringwave ECAT System Rent & Buy Used - Thermo Fisher/Keytek

The ECAT E103, E411, E501B, E503 and E4554 by Thermo Fisher Scientific / Keytek are designed to test to a variety of immunity standards requiring three phase surge, EFT, & ringwave. This Thermo Fisher Scientific EMI immunity test equipment comes with an A2LA accredited calibration and free technical support included with rental. This rental is a combination of the ECAT E103 control unit and E411, E501B, E503 and E4554 modules.

This Thermo Fisher Scientific / Keytek EMC immunity generator provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with to be conducted efficiently without re-initializing the EUT between tests. The ECAT E411, E501B, and E503, can be rented individually or in combination with the ECAT E103. 

This ECAT system is designed to test EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-12, ANSI/IEEE C62.41, ANSI/IEEE C62.45 and many other EMC standards. The modular system of this Thermo Fisher / Keytek product is upgraded to meet the latest requirements of the IEC standards. The E103 and E411, E501B, E503, E4554 combination can be controlled via front panel or through computer using Keytek software.  

Add to cart

RENTAL

EMCPro Plus Rental - Keytek Immunity Surge & Transient Generator

The EMCPro Plus made by Thermo Fisher Scientific is a 6 kv Generator for EFT to 4.4kV, Surge to 6kV, 100 kHz Ringwave to 6kV, Dips and Interrupts with a built-in single phase coupler. All of our EMC Immunity generators come with an A2LA calibration & technical support. Additional test capabilities such as the 10x700 Telecom Wave is available on request.

This EMI Immunity Generator is an easy to use, cost effective solution to a diverse set of testing needs. This system provides easy to use front panel display and can be controlled via computer through windows based software. The EMCPro also monitors output of the coupling unit and automatically switches connections according to coupling mode.

The EMCPro Plus is designed to test for a variety of EMC immunity industry standards including EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11, EN/IEC 61000-4-12, CEMark, and ANSI IEEE C62.41 cat. B. The EMCPro Plus rental equipment It also can also be configured for custom test protocols to meet specific test requirements using the software and a full line of options and accessories.

SALE/RENTAL

Thermo Keytek ECAT E103, E411, E501 B, and E4554 - Rent or Buy (used) - Three Phase Surge and EFT System

Thermo Keytek ECATS for EFT and Surge system, with the E501b surge generator to 6kV and the E411 EFT / Burst generator to 4.4kV with 3 phase coupler/decoupler for EN & IEC 61000-4-4,-5,-12, ANSI C62.41,C62.45.  Upgraded to meet the latest editions of the IEC standards.

 

Add to cart

Showing 1 to 9 of 10 products