EMC Partner IMU4000 - 4kV EFT, Surge, & Dips (Opt. IEC 61000-4-16)

4kV Immunity Pulse System

EMC Partner IMU4000 - 4kV EFT, Surge, & Dips (Opt. IEC 61000-4-16)

Conducted Immunity Generator Features 

      • 4.1kV Bi-wave Surge & 4.4kV EFT/Burst
      • Newest Model! TRA3000 Replacement!
      • ISO 17025 Calibration included
      • Free Technical Support & 2 Days Free Transit
      • Display information with any web browser
      • Same Platform for IEC 61000-4-16 Solution
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The EMC Partner IMU4000 EMI (Optional: Common Mode) test generator is an all in one unit testing solution for testing to EFT to 4.4kV and Surge to 4.1kV with built-in single phase coupler, and Dips under 6 amps. A2LA accredited calibration is included in the EMC rental equipment price. This products "Plug and Play" architecture allows for system to automatically identify hardware then re-configure testing menu to reflect the change.

This Immunity Test Generator has been created for CE transient testing as well as fulfilling IEC basic standard requirements. The IMU 4000 includes both an Ethernet Port for control communication and test reporting that includes laboratory environmental conditions.This EMC tester is a environmentally conscience solution with low power consumption, less noise, and less heat. 

The IMU 4000 is a single unit testing system for EN/IEC 61000-4-4, EN/IEC 61000-4-5EN/IEC 61000-4-11and CE Mark. With the common mode available for testing to EN/IEC 61000-4-16 this design offers flexibility depending on testing needs. As an added bonus EMC Partner does not require proprietary software all reports are HTML based and can be viewed with web browsers.

IMU4000 - Test Accessories

Conducted Immunity Generator Features 

      • 4.1kV Bi-wave Surge & 4.4kV EFT/Burst
      • Newest Model! TRA3000 Replacement!
      • ISO 17025 Calibration included
      • Free Technical Support & 2 Days Free Transit
      • Display information with any web browser
      • Same Platform for IEC 61000-4-16 Solution
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The EMC Partner IMU4000 EMI (Optional: Common Mode) test generator is an all in one unit testing solution for testing to EFT to 4.4kV and Surge to 4.1kV with built-in single phase coupler, and Dips under 6 amps. A2LA accredited calibration is included in the EMC rental equipment price. This products "Plug and Play" architecture allows for system to automatically identify hardware then re-configure testing menu to reflect the change.

This Immunity Test Generator has been created for CE transient testing as well as fulfilling IEC basic standard requirements. The IMU 4000 includes both an Ethernet Port for control communication and test reporting that includes laboratory environmental conditions.This EMC tester is a environmentally conscience solution with low power consumption, less noise, and less heat. 

The IMU 4000 is a single unit testing system for EN/IEC 61000-4-4, EN/IEC 61000-4-5EN/IEC 61000-4-11and CE Mark. With the common mode available for testing to EN/IEC 61000-4-16 this design offers flexibility depending on testing needs. As an added bonus EMC Partner does not require proprietary software all reports are HTML based and can be viewed with web browsers.

Data Sheet User Manual

Common Standards

EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11,

CE Mark, optional EN/IEC 61000-4-16

Control Features

 

 User Interface

7” Colour touch panel

Operating System

 EMC PARTNER (EPOS)

Communication Interface

Ethernet


Accessory control interface

 RS485

Atmospheric measurement 

Temperature, humidity, pressure (with accessory)

BNC monitor ports

 EUT plus IMPULSE voltage & current

Synchro on / off

0° up to 360°

Integrated CDN:

 

AC Voltage and Current 

 300V/16A; 50 to 400Hz

DC Voltage and Current

 300V/16A

Maximum EUT current

 16A

Frequency range

 DC up to 60Hz

Power frequency synchro

 DC up to 60Hz

Coupling EFT

 L, N, PE, L+N, L+PE, N+PE, L+N+PE, direct

Coupling CWG

L-N, L-PE, N-PE, direct

Additional Capabilities

 

   EFT Burst 5/50ns:

 

  Standards

EN/IEC 61000-4-4, and EN 61000-6-1,-6-2, CEMark

  Voltage Waveform into 50Ω load

5ns Rise Time ±30%,  50µs pulse width ±30%

  Voltage Waveform into 1000Ω load

5ns Rise Time ±30%,  50µs pulse width ±30%

  Voltage Amplitude

250-4,400V ±10%, 125V-2,200V ±10% into 50Ω

  Burst Duration  

td = 0.10ms – 30ms

  Burst Period

tr = 1ms – 1,000ms

  Frequency

f = 0.1kHz - 1,000kHz

Combination Wave Surge:

 

  Standards

EN/IEC 61000-4-5 , EN 61000-6-1, -6-2, CEMark

  Open Circuit Voltage Waveform

250V – 4,100V, Front Time1.2us ±30%, 50µs Duration ± 20%

  Short Circuit Current Waveform

125A- 2050A, 8µ Front Time ±20%, 20µs Duration ±20%

  Peak Open Circuit Voltage

250V–4100V ±10%

  Peak Short Circuit Current

125A–2050A ±10%@2Ω, 20.8-500A ±10%@12Ω

  Pulse Repetition Rate

MAX. 1Hz (1s – 999s)

Peak Voltage and Current Monitoring

5,000V, 2,500A in the LCD Display

Monitoring of EUT voltage and current

Built-in 100:1 voltage measurement

10mV/A, max. 1,000A

Dips and Interrupts:

 

Standards

EN IEC 61000-4-11 EN 61000-6-1, -6-2, CEMark

Nominal current

6 Amps Max.

Interruption Time

50µs up to 30s

Phase angle interruption

0 to 360 degrees

Rise/ Fall Time

1 to 5µs

Included with Rental of EMC Partner IMU 4000

Below you will find a list of common accessories that you can expect to be delivered with the equipment. This is a generic standard list and should you require an exact connector or accessory please contact us prior to order shipping. A detailed list of these can be found on the "All Accessories" tab. 

 

IMU 4000

    • Power Cord
    • EUT Power In Cable with MC Connector
    • EUT Power out Cable
    • Red Ethernet Cable
    • (2) U shaped jumpers(attached on back)
    • EU to USA adapter plug
    • (2)CD with Software and Manuals
    • Software on Flash Drive
    • Printed Manual
    • Calibration Papers
    • Pelican Shipping Case
    TRA3000 Full Accessory List
    Item Capabilities
    CDN2000-06-32 for Three Phase Coupling Add three phase capability with automatic or manual three phase coupling networks. The CDN2000A-06-32 and CDN2000-06-32, can be used for EFT, CWG surge and ring wave. Coupling path selection is either automatic under software control, or manual on the CDN front panel. All coupling networks fulfill the requirements laid down in the IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-12 (ring wave) and ANSI C62.41 standards.
    CDN2000A-06-63 for Three Phase Coupling

    Add higher current three phase capability with automatic coupling network CDN2000A06-63. This can be used for EFT, CWG surge and ring wave. Coupling path selection is automatic under software control. This coupling network fulfills the requirements laid down in the IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-12 (ring wave) and ANSI C62.41 standards.

    CDN-A-3P100-480 F / F-S for 100A three Phase Coupling

    Three phase CDN with line voltages L to N/PE=280V and L to L=480V, line current 100A per phase. Automatic coupling path selection for EFT or EFT and SURGE controlled by TRA2000, TRA2004, TRA2006, TRA3000.

    CDN-A-3P100-690 F / F-S for 100A three Phase Coupling Three phase CDN with line voltages L to N/PE=398V and L to L=690V, line current 100A per phase. Automatic coupling path selection for EFT or EFT and SURGE controlled by TRA2000, TRA2004, TRA2006, TRA3000 and MIG0603INx.

    CDN2000-06-25 Three Phase Coupling

    CDN2000-06-25 can be used for Combination wave, Ring wave and EFT testing. With an EMC PARTNER oscillatory wave tester, power and up to four data lines using the 100kHz and 1MHz oscillatory waves can be tested according to IEC61000-4-18.

    CN16-450C

    Single phase CDN for superimposing surge and EFT into power lines. EUT power supply up to 16A at 115V 400Hz. For use ONLY with TRA2004 or TRA2006

    CN2000TT MC

    Test pistol for direct current injection of surge and 10/700µs according to IEC 61000-4-5. Cable length 1.5m with MC plugs. The test pistols can be used together with MIG system equipped with MC plug outputs on front panel or networks (NW).

    TEST SETUP

    Test package for EFT testing. This includes 1m cable with 2 x 470kOhm resistors and mechanical connections to the EFT reference plane.

    VERI50EFT

    50ohm termination with high voltage BNC connector and integrated divider for EFT calibration / verification in accordance with IEC 61000-4-4 Ed2

    VERI1KEFT

    1kOhm termination with high voltage BNC connector and integrated divider for EFT calibration / verification in accordance with IEC 61000-4-4 Ed2.

    CN-EFT1000

    Capacitive coupling clamp 100ohm according to IEC 61000-4-4 including 1m coax cable with BNC connectors.

    CN-BALUN

    Balanced/unbalanced transmission line transformer for EFT and 1MHz damped sine according to ANSI/IEEE C.37.90. Including coaxial cable with HV-BNC plugs (3x 0.5m), test tip + HV-BNC adapter (1 red, 1 black) and HV-BNC connector (2x).

    ESD2000

    Coupling network for 8 signal/data lines as per IEC 61000-4-5 Ed 3.0

    EXT-TRA3000E

    ESD discharge module to fulfill IEC 61000-4-2 requirements. Self contained unit with high voltage generation. For full details, please refer to brochure “ESD Testers”. For use ONLY with TRA3000.

    ADAPTER EFT-CDN

    Adapter cable which enables EFT impulses to be measured at the output of either a single or three phase CDN as required by IEC 61000-4-4 Ed.2.

    CDN-UTP

    The CDN-UTP is a sophisticated coupling and de-coupling network for superimposing surge impulses on balanced communication lines in accordance with IEC 61000-4-5 (Figure 12: unshielded symmetrical interconnection lines), ITU-K20, K21 and FCC part 68. It is designed for 1.2/50µs and 10/700µs pulses up to 6.6kV. CDN-UTP is also available with 4 pairs (8 lines) as the CDN-UTP8 version.

    Common Standards for IMU Conducted Immunity Platform

    • IEC 61000-4-2 : Testing and measurement techniques - Electrostatic discharge immunity test.
    • IEC 61000-4-4 : Testing and measurement techniques - Electrical fast transient / burst immunity test.
    • IEC 61000-4-5: Testing and measurement techniques - Surge immunity test.
    • IEC 61000-4-8: Testing and measurement techniques - Power frequency magnetic field immunity test.
    • IEC 61000-4-9: Testing and measurement techniques - Pulse magnetic field immunity test.
    • IEC 61000-4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests.
    • IEC 61000-4-16 : Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0Hz to 150kHz.
    • IEC 61000-4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests.
    • IEC 61000-4-34: Testing and measurement techniques - Voltage, dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16A per phase

    IMU 4000 - Overview & Setup EMC Parnter

     

    Description: This video provides an overview of the IMU 4000 platform and software which includes a variety of immunity testing capabilities.

     

    I would recommend Transient Specialists. Transient Specialists always provides quality products within the established timeframes. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.

    Scott D., TUV SUD Canada

     

    Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!

    John H., Gates Air, Inc.

     

    Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.  

    Adam P., Clark Testing

     

    Working for a testing company I deal with renting equipment all the time.  Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.

    Richard T., National Technical Systems

    Comparable EMC Systems

    Capabilities & Voltage 4.4kV Combination Wave & 4.1kV EFT 5kV Combination Wave & 5kV EFT 5.5kV Combination Wave & 5kV EFT 4.1kV Combination Wave, 4.4kV EFT, & 6Amps Dips
    Standards (IEC) IEC 61000-4-5 & IEC 61000-4-4 IEC 61000-4-5 & IEC 61000-4-4 IEC 61000-4-5 & IEC 61000-4-4 IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11
    Built-in Coupler 240V/16Amp AC/DC 264V/16Amp AC 220V/10Amp DC 300V/16Amp AC/DC & 300V/32Amp AC/DC 280V/16Amp AC 300V/16Amp DC
    Rental CDNs 1 & 3-Phase Automatic 1 & 3-Phase Automatic 1 & 3-Phase Automatic 1-Phase Auto & 3-Phase Manual (EFT)
    Additional Features Many Rental CDNs Available & Easy to Use Voltage/Current Monitoring on Front Newest EM Test Solution & 32Amp Built-in Coupler Same Platform for IEC 61000-4-16 Solution