TRA3000 C - EMC Partner Common Mode Generator - IEC 61000-4-16

RENTAL

TRA3000 C - EMC Partner Common Mode Generator - IEC 61000-4-16

Availability: In Stock - Order by 3PM Ships Today!

Common Mode Test System Features: 

      • Provides Capabilities for both Long & Short Tests
      • ISO 17025 Calibration All Components
      • Includes 1-phase CDN 300V 50/60Hz
      • Free Technical Support & 2 Days Free Transit
      • Includes external box for short (CN-16)
      • CN 16, EXT-IMU C-Short, & PS3 Complete System
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The EMC Partner TRA3000 C  Rental is an EMI test generator is an all in one unit testing solution for both the long/short tests. This EMC Partner product includes single phase CDN for EN IEC 61000-4-16 and external box for the 300 volt short test. A2LA accredited calibration is included in the EMC rental equipment price. This products "Plug and Play" architecture allows for system to automatically identify hardware then re-configure testing menu to reflect the change.

This Immunity Test Generator has been created for CE transient testing as well as fulfilling IEC basic standard requirements. The TRA 3000C includes both an Ethernet Port for control communication and test reporting that includes laboratory environmental conditions.This EMC tester is a environmentally conscience solution with low power consumption, less noise, and less heat. 

The TRA3000C is a single unit testing system for EN IEC 61000-4-4EN IEC 61000-4-5EN IEC 61000-4-11CE Mark, and EN IEC 61000-4-16. This product offers many solutions for common standards providing customers with flexibility. As an added bonus EMC Partner does not require proprietary software all reports are HTML based and can be viewed with web browsers.

TRA3000 - Test Accessories

Common Mode Test System Features: 

      • Provides Capabilities for both Long & Short Tests
      • ISO 17025 Calibration All Components
      • Includes 1-phase CDN 300V 50/60Hz
      • Free Technical Support & 2 Days Free Transit
      • Includes external box for short (CN-16)
      • CN 16, EXT-IMU C-Short, & PS3 Complete System
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The EMC Partner TRA3000 C  Rental is an EMI test generator is an all in one unit testing solution for both the long/short tests. This EMC Partner product includes single phase CDN for EN IEC 61000-4-16 and external box for the 300 volt short test. A2LA accredited calibration is included in the EMC rental equipment price. This products "Plug and Play" architecture allows for system to automatically identify hardware then re-configure testing menu to reflect the change.

This Immunity Test Generator has been created for CE transient testing as well as fulfilling IEC basic standard requirements. The TRA 3000C includes both an Ethernet Port for control communication and test reporting that includes laboratory environmental conditions.This EMC tester is a environmentally conscience solution with low power consumption, less noise, and less heat. 

The TRA3000C is a single unit testing system for EN IEC 61000-4-4EN IEC 61000-4-5EN IEC 61000-4-11CE Mark, and EN IEC 61000-4-16. This product offers many solutions for common standards providing customers with flexibility. As an added bonus EMC Partner does not require proprietary software all reports are HTML based and can be viewed with web browsers.

Data Sheet - TRA3000TRA3000 Common mode

Common Standards

EN IEC 61000-4-16, EN IEC 61000-4-4, EN IEC 61000-4-5,

EN IEC 61000-4-11, CE Mark

Integrated CDN:

 

  AC Voltage and Current 

300V/16A; 50 to 400Hz

  DC Voltage and Current

300V/16A

Common Mode Test:

 


Standards

EN IEC 61000-4-16 Continuous and Short Duration Test

Continuous Duration Test

30Vrms

Source Impedance

50 ohms

DC Switching Time

1-5µs

Power Frequency Tests

DC, 16.7Hz, 50Hz, 60Hz

Power Harmonics Tests

15Hz up to 150kHz

Sweep Time

1 decade/minute

Short Duration Test Level

0 – 300Vrms

EFT Burst 5/50 ns:

 

  Standards

EN/IEC 61000-4-4, and EN 61000-6-1,-6-2, CEMark

  Voltage Waveform into 50Ω load

5ns Rise Time ±30%,  50µs pulse width ±30%

  Voltage Waveform into 1000Ω load

5ns Rise Time ±30%,  50µs pulse width ±30%

  Voltage Amplitude

250-4,400V ±10%, 125V-2,200V ±10% into 50Ω

  Burst Duration  

td = 0.10ms – 30ms

  Burst Period

tr = 1ms – 1,000ms

  Frequency

f = 0.1kHz - 1,000kHz

Combination Wave Surge:

 

  Standards

EN/IEC 61000-4-5 , EN 61000-6-1, -6-2, CEMark

  Open Circuit Voltage Waveform

250V – 4,100V, Front Time1.2us ±30%, 50µs Duration ± 20%

  Short Circuit Current Waveform

125A- 2050A, 8µ Front Time ±20%, 20µs Duration ±20%

  Peak Open Circuit Voltage

250V–4100V ±10%

  Peak Short Circuit Current

125A–2050A ±10%@2Ω, 20.8-500A ±10%@12Ω

  Pulse Repetition Rate

MAX. 1Hz (1s – 999s)

Peak Voltage and Current Monitoring

5,000V, 2,500A in the LCD Display

Monitoring of EUT voltage and current

Built-in 100:1 voltage measurement

10mV/A, max. 1,000A

Dips and Interrupts:

 

Standards

EN IEC 61000-4-11 EN 61000-6-1, -6-2, CEMark

Nominal current

6 Amps Max.

Interruption Time

50µs up to 30s

Phase angle interruption

0 to 360 degrees

Rise/ Fall Time

1 to 5µs

Weight

25kg, 55 pounds

 

Included with Rental EMC Common Mode System

Below you will find a list of common accessories that you can expect to be delivered with the equipment. This is a generic standard list and should you require an exact connector or accessory please contact us prior to order shipping. 

 

TRA 3000

    • TRA 3000 Serial #
    • Power Cord
    • EUT Power Cable with MC Connector
    • Ethernet Cable
    • (2) U Shaped Jumpers (attached to the generator)
    • EU to USA  Adapter Plug
    • USB Stick with Software
    •  Printed Manual
    • Calibration Documentation
    • Pelican Shipping Case

 

CN 16

    • CN #
    • MC Cords (3)
    • U Shaped Jumpers (3)
    • Printed Manual
    • Calibration Documentation 
    • MC Connectors (3 Sets)
    • Case

 

PS3

    • PS3 #
    • Power Cord
    • 9 Pin Serial Cord
    • Printed Manual
    • Calibration Documentation

 

EXT-IMU C-Short

    • RS485-RS232 Adapter
    • 3 pcs - Cables
    • Printed Manual
    • Calibration documentation
    • USB Stick with Manuals
    • Laptop with Charger

     

    TRA3000 Full Accessory List
    Item Capabilities
    CDN2000-06-32 for Three Phase Coupling Add three phase capability with automatic or manual three phase coupling networks. The CDN2000A-06-32 and CDN2000-06-32, can be used for EFT, CWG surge and ring wave. Coupling path selection is either automatic under software control, or manual on the CDN front panel. All coupling networks fulfill the requirements laid down in the IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-12 (ring wave) and ANSI C62.41 standards.
    CDN2000A-06-63 for Three Phase Coupling

    Add higher current three phase capability with automatic coupling network CDN2000A06-63. This can be used for EFT, CWG surge and ring wave. Coupling path selection is automatic under software control. This coupling network fulfills the requirements laid down in the IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-12 (ring wave) and ANSI C62.41 standards.

    CDN-A-3P100-480 F / F-S for 100A three Phase Coupling

    Three phase CDN with line voltages L to N/PE=280V and L to L=480V, line current 100A per phase. Automatic coupling path selection for EFT or EFT and SURGE controlled by TRA2000, TRA2004, TRA2006, TRA3000.

    CDN-A-3P100-690 F / F-S for 100A three Phase Coupling Three phase CDN with line voltages L to N/PE=398V and L to L=690V, line current 100A per phase. Automatic coupling path selection for EFT or EFT and SURGE controlled by TRA2000, TRA2004, TRA2006, TRA3000 and MIG0603INx.

    CDN2000-06-25 Three Phase Coupling

    CDN2000-06-25 can be used for Combination wave, Ring wave and EFT testing. With an EMC PARTNER oscillatory wave tester, power and up to four data lines using the 100kHz and 1MHz oscillatory waves can be tested according to IEC61000-4-18.

    CN16-450C

    Single phase CDN for superimposing surge and EFT into power lines. EUT power supply up to 16A at 115V 400Hz. For use ONLY with TRA2004 or TRA2006

    CN2000TT MC

    Test pistol for direct current injection of surge and 10/700µs according to IEC 61000-4-5. Cable length 1.5m with MC plugs. The test pistols can be used together with MIG system equipped with MC plug outputs on front panel or networks (NW).

    TEST SETUP

    Test package for EFT testing. This includes 1m cable with 2 x 470kOhm resistors and mechanical connections to the EFT reference plane.

    VERI50EFT

    50ohm termination with high voltage BNC connector and integrated divider for EFT calibration / verification in accordance with IEC 61000-4-4 Ed2

    VERI1KEFT

    1kOhm termination with high voltage BNC connector and integrated divider for EFT calibration / verification in accordance with IEC 61000-4-4 Ed2.

    CN-EFT1000

    Capacitive coupling clamp 100ohm according to IEC 61000-4-4 including 1m coax cable with BNC connectors.

    CN-BALUN

    Balanced/unbalanced transmission line transformer for EFT and 1MHz damped sine according to ANSI/IEEE C.37.90. Including coaxial cable with HV-BNC plugs (3x 0.5m), test tip + HV-BNC adapter (1 red, 1 black) and HV-BNC connector (2x).

    ESD2000

    Coupling network for 8 signal/data lines as per IEC 61000-4-5 Ed 3.0

    EXT-TRA3000E

    ESD discharge module to fulfill IEC 61000-4-2 requirements. Self contained unit with high voltage generation. For full details, please refer to brochure “ESD Testers”. For use ONLY with TRA3000.

    ADAPTER EFT-CDN

    Adapter cable which enables EFT impulses to be measured at the output of either a single or three phase CDN as required by IEC 61000-4-4 Ed.2.

    CDN-UTP

    The CDN-UTP is a sophisticated coupling and de-coupling network for superimposing surge impulses on balanced communication lines in accordance with IEC 61000-4-5 (Figure 12: unshielded symmetrical interconnection lines), ITU-K20, K21 and FCC part 68. It is designed for 1.2/50µs and 10/700µs pulses up to 6.6kV. CDN-UTP is also available with 4 pairs (8 lines) as the CDN-UTP8 version.

    Common Standards for TRA Platform

    • IEC 61000-4-2 : Testing and measurement techniques - Electrostatic discharge immunity test.
    • IEC 61000-4-4 : Testing and measurement techniques - Electrical fast transient / burst immunity test.
    • IEC 61000-4-5: Testing and measurement techniques - Surge immunity test.
    • IEC 61000-4-8: Testing and measurement techniques - Power frequency magnetic field immunity test.
    • IEC 61000-4-9: Testing and measurement techniques - Pulse magnetic field immunity test.
    • IEC 61000-4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests.
    • IEC 61000-4-16 : Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0Hz to 150kHz.
    • IEC 61000-4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests.
    • IEC 61000-4-34: Testing and measurement techniques - Voltage, dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16A per phase

    TRA3000 - Overview & Setup EMC Parnter

     

    Description: This video provides an overview of the TRA3000 platform and software which includes a variety of immunity testing capabilities.

     

    I would recommend Transient Specialists. Transient Specialists always provides quality products within the established timeframes. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.

    Scott D., TUV SUD Canada

     

    Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!

    John H., Gates Air, Inc.

     

    Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.  

    Adam P., Clark Testing

     

    Working for a testing company I deal with renting equipment all the time.  Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.

    Richard T., National Technical Systems