IEC 61000-4-5 - Surge/Combination Wave Test Equipment Rentals

IEC 61000-4-5 - Surge/Combination Wave Test Equipment Rentals

EN IEC 61000-4-5 - 2014 relates to immunity requirements for unidirectional surges caused by over-voltages from switching and lightning transients. This standard defines ranges of test levels, test equipment, test setups, and test procedures for equipment under test (EUT). The goal of this International Electrotechnical Commission (IEC) standard is a reproducible guide to evaluate equipment when exposed to this type of phenomena. IEC 61000-4-5 specifies that direct injections of lightning currents (direct lightning strikes) are not considered in this standard. The most recent 2014 version 3 cancels out previous publications and gives specifications for 10/700 µs combined wave generator. This Standard can be purchased on the IEC Webstore. EN IEC 61000-4-5 Peak to Peak and Voltage Test Levels
EN IEC 61000-4-5 is based on a surge, a transient wave of electrical current, and is tested for by Immunity Test Equipment. This standard defines two Combination Wave pulses (Open Circuit Voltage and Short Circuit Current). It set the number of pulses from the EMC test equipment to a.c. ports, d.c. ports, and interconnection lines, at 5 positive and 5 negative (a.c. at 0°, 90°, 180°, & 270°). The time per each pulse must be one minute or less and the EUT must be under operating conditions while the EMC testing is occurring.  EN IEC 61000-4-5 Open and Short Circuit Waveforms
For EN IEC 61000-4-5 combination wave/surge rentals we offer a variety of different EMI test equipment suppliers including Teseq, EMC Partner, EM Test, Haefely, and many others to meet customer requirements and preferences. These products all have the capability to meet the surge requirements for EN IEC 61000-4-5 and each have unique testing and reporting capabilities. The most common rental units for surge testing are the NSG 3060, Axos 8, NX5, and UCS500n7. We also provide many accessories that may be required to complete unique and specific testing requirements. These EMI surge products come with an A2LA accredited calibration and free technical support included with the rental. EN IEC 61000-4-5 Surge Rental Products Picture

IEC 61000-4-5 - Surge/Combination Wave Generator Rentals

Showing 1 to 9 of 33 products

RENTAL

NX5 Rental - EFT To 5.5kV And Surge to 5kV With Built-in 16 Amp. Single Phase Coupler

The EM Test  NX5 EMI test generator to 5.5kV EFT and 5kV surge with a built-in 16 A single phase coupler. A2LA accredited calibration is included in the EMC rental equipment price. It is the most versatile tester to address transient and power fail requirements for both international and commercial standards. 

This Immunity Test Generator includes an easy-to-use color touch screen allow for efficiently changing of testing parameters. It can be operated manually from the intuitive front touch screen or remotely via its built-in Ethernet, USB or optical interface. The NX 5 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing.

This product includes many reprogrammed test routines ideal for testing to EN IEC 61000-4-4, EN IEC 61000-4-5, EN IEC 61000-4-11 and CE Mark. Its internal single-phase Coupling/Decoupling Network (CDN) can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 A per phase. With separate power mains supply inputs, it allows the utilization of different EUT supply voltages for maximum flexibility.

RENTAL

IMU 4000 Rental - EMC Partner Generator EFT to 4.4kv, Surge to 4.1kV, Dips With Built-in Single Phase Coupler (Optional IEC 61000-4-16)

The EMC Partner IMU4000 EMI (Optional: Common Mode) test generator is an all in one unit testing solution for testing to EFT to 4.4kV and Surge to 4.1kV with built-in single phase coupler, and Dips under 6 amps. A2LA accredited calibration is included in the EMC rental equipment price. This products "Plug and Play" architecture allows for system to automatically identify hardware then re-configure testing menu to reflect the change.

This Immunity Test Generator has been created for CE transient testing as well as fulfilling IEC basic standard requirements. The IMU 4000 includes both an Ethernet Port for control communication and test reporting that includes laboratory environmental conditions.This EMC tester is a environmentally conscience solution with low power consumption, less noise, and less heat. 

The IMU4000 is a single unit testing system for EN IEC 61000-4-4EN IEC 61000-4-5EN IEC 61000-4-11and CE Mark. With the common mode available for testing to EN IEC 61000-4-16 this design offers flexibility depending on testing needs. As an added bonus EMC Partner does not require proprietary software all reports are HTML based and can be viewed with web browsers.

RENTAL

Axos8 Rental - EFT to 5kV, Surge Generator and Ringwave Generator to 7kV, Built-in Power Coupler

The Haefely Hipotronics Axos8 EMI surge generator to 7 kV Ringwave and Surge generator with 5kV EFT (optional Dips and Interrupts) and a built-in single phase coupler. A2LA accredited calibration is included in the EMC rental equipment price. This expandable Haefely product provides safe and reliable operation by using safety interlock, warning lamp and emergency stop functions helping to ensure safe use.

This Immunity Test Generator expandable functionality allows for quick and completely automated testing to the most common IEC, EN, ANSI, IEEE and UL standards. The Axos 8 is user friendly with manual and automated test mode and software assisted test preparation. This EMC testing system touch screen provides efficient and effective manipulation of testing criteria to meet or a diverse set of testing needs.

The Axos 8 allows for testing to EN IEC 61000-4-4, EN IEC 61000-4-5, EN IEC 61000-4-12 and optional external box for testing per EN IEC 61000-4-11 and EN IEC 61000-4-29. The AXOS unit can either be operated via front panel by large colour graphic interface or remotely from the PC. This product has the ability to change testing parameters while conducting tests and is is useful for monitoring and debugging function during design phase as well as compliance and pre-compliance testing.

RENTAL

Axos5 Rental - Haefely Hipotronics 5kV Immunity Generator

The Haefely Axos 5 EMI test generator to 5kV Surge and 5kV EFT with a built-in single phase coupling/decoupling network. A2LA accredited calibration is included in the EMC rental equipment price. This compact Haefely product provides safe and reliable operation by using safety interlock, warning lamp and emergency stop functions helping to ensure safe use.

This Immunity Test Generator is designed for EFT / Burst, Surge, Magnetic Field and AC & DC Dips and Interrupts allowing for a diverse range of applications. The Axos5 is easy to operate with manual and automated test mode and software assisted test preparation. This EMC testing system touch screen provides efficient and effective manipulation of testing criteria to meet or a diverse set of testing needs.

The Axos 5 expandable functionality allows for quick and completely automated testing to EN IEC 61000-4-4, EN IEC 61000-4-5 and EN IEC 61000-4-11 and CE Mark. The unit also includes an integrated single-phase coupling decoupling network (CDN) for EMC testing applications up to 16A. The AXOS unit can either be operated via front panel by large color graphic interface or remotely from the PC for added flexibility. 

RENTAL

NX5 Rental - EFT To 5.5kV And Surge to 5kV With Built-in 32 Amp. Single Phase Coupler

The EM Test  NX 5 EMI test generator to 5.5kV EFT and 5kV surge with a built-in 16 A single phase coupler. A2LA accredited calibration is included in the EMC rental equipment price. It is the most versatile tester to address transient and power fail requirements for both international and commercial standards. 

This Immunity Test Generator includes an easy-to-use color touch screen allow for efficiently changing of testing parameters. It can be operated manually from the intuitive front touch screen or remotely via its built-in Ethernet, USB or optical interface. The NX5 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing.

This NX 5 includes many reprogrammed test routines ideal for testing to EN IEC 61000-4-4EN IEC 61000-4-5EN IEC 61000-4-11 and CE Mark.  Its internal single-phase Coupling/Decoupling Network (CDN) can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 A per phase.

RENTAL

NSG 3150 Rental - Teseq 15kV Combination Wave/Surge Generator

The NSG 3150 Teseq is an EMC Immunity Tester for Combination Wave Surge to 15kV, and offers solutions for both CE mark & ANSI testing. This product is the combination of the NSG 3150 and CDN 3153 (three phase coupler) and are rented together. A2LA accredited calibration is included in the EMC immunity rental equipment price. 

This Surge Immunity Test Generator comes with the standard an easy to use Teseq interface that includes a 7" color screen and thumb wheel for adjustments. The NSG3150 offers flexible repetition time setting for significant reduction in test times. The 15kV surge generator also provides quick launch testing from an extensive Standards Library or User Test folders.

This compact EMC surge immunity test set is the perfect solution for outdoor applications. The NSG 3150 15kV capabilities surpasses many testing requirements and can be controlled via laptop or through color display. This combination wave generator is ideal for testing to EN IEC 61000-4-5ANSI C62.41C62.45, and UL 1449. The NSG 3150 and CDN 3153 system is compliant with the latest version of EN IEC 61000-4-5.  

RENTAL

UCS 500N7 Rental - EM Test EFT to 5.5kV, Surge to 7kV and 100kHz Ring to 6kV, Built-in Single Phase Power Coupler

The EM Test UCS500N7 is an EMC Immunity Test equipment is an all in one box for testing EFT to 5.5kV, Surge to 7kV and 100kHz Ringwave to 6 kV, with built-in single phase coupler and software. This test equipment provides optional Dips and Interrupts testing with the V4780 S2 external variac. The UCS500N7 includes a built-in CDN for single phase it can be extended for testing three-phse DUT's by means of automatically controlled external coupling network up to 100A. 

This Immunity Test Generator can be operated via the front panel or by remote via the built-in USB or GPIB interface. Fail inputs allow control an ongoing test sequences based on the status of the DUT. Monitoring outputs (BNC) are offered for easy signal measurement and verification. This EMI test equipment provides a fully compliant that goes to levels beyond common testing requirements.

The UCS500n7 includes many reprogrammed test routines ideal for testing to EN IEC 61000-4-4EN IEC 61000-4-5EN IEC 61000-4-11EN IEC 61000-4-12, CEMarkANSI IEEE C62.41 cat. B, EN IEC 61000-6-1, and EN IEC 61000-6-2. This product also includes both pre-programmed standard tests and a quick start menu allowing for parameters to be changed on-line during the test to evaluate the susceptibility level of an individual DUT. 

RENTAL

A NSG 3060 Rental - Teseq Surge 6.6kV, Ringwave 6.6kV, & EFT 4.8kV Generator

The Teseq NSG 3060 EMC Immunity generator provides EFT to 4.8kV, Surge to 6.6kV, 100 kHz Ringwave to 6.6kV and offers solutions for both CE mark, ANSI, and IEC testing.  A2LA accredited calibration is included in the EMC rental equipment price. It includes both coupling methods associated with IEC and ANSI EMC testing standards.

The NSG3060 offers a user friendly design to help streamline testing to EN IEC 61000-4-4EN IEC 61000-4-5, EN 61000-4-12,ANSI C62.41, C62.45, and UL 1449.  It offers a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel.  Expansion capabilities enable the system to be configured for a much broader range of applications including 10/700 Telecom Surge and Magnetic Field tests.

This Immunity Test Generator has a Ethernet port for connect with a PC and includes window based software. This simplifies the EMC test standard allowing for compilation of complex test sequences with diverse pulse types. The software with the NSG 3060 test set enables the user to create reports and enter observations as the test progresses increasing the efficiency of long-term tests.

RENTAL

NSG 3040 Rental - EFT 4.4kV, Surge 4.8kV Built-In Coupler

The Teseq NSG 3040 electromagnetic immunity (EMI) test generator provides 4.4kV Surge and 4.4kV EFT with a built-in single phase coupler and is designed primarily for cable-borne transient interference tests. A2LA accredited calibration is included in the EMC rental equipment price. This Teseq products modular architecture and industry standard interfaces allow it to be easily expanded and customized to meet individual testing needs.

This Immunity Test Generator is designed to fulfill conducted EMC testing requirements for CE mark testing, including Combination Wave Surge (4.4 kV), Electrical Fast Transient (EFT) pulses (4.8 kV) and Power Quality Testing (PQT). The NSG3040 includes a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel. This EMC test equipment can also be controlled via PC through the Ethernet Port.

The NSG 3040 system is an all in one box that tests to EN IEC 61000-4-4EN IEC 61000-4-5 and EN IEC 61000-4-11 and CE Mark with optional INA 6502. Expansion capabilities enable the system to be configured for a much broader range of applications including Telecom Surge 10/700 and Magnetic Field tests. This equipment allows easy modification for the requirements of new standards, and new function units for new parameters may be incorporated in existing systems.

Showing 1 to 9 of 33 products