Surge/Combination Wave - Multifunction Generators Rentals
Surge/Combination Wave - Multifunction Generators Rentals
EN/IEC 61000-4-5 - 2014 relates to immunity requirements for unidirectional surges caused by over-voltages from switching and lightning transients. This standard defines ranges of test levels, test equipment, test setups, and test procedures for equipment under test (EUT). The goal of this International Electrotechnical Commission (IEC) standard is a reproducible guide to evaluate equipment when exposed to this type of phenomena. It specifies that direct injections of lightning currents (direct lightning strikes) are not considered in this standard. The most recent 2014 version 3 cancels out previous publications and gives specifications for 10/700 µs combined wave generator. The most changes from version 2 fall underneath the test procedures section of the standard. This Standard can be purchased on the IEC Webstore.
EN IEC 61000-4-5 Peak to Peak and Voltage Test Levels
This IEC standard is based on a surge, a transient wave of electrical current, and is tested for by Immunity Test Equipment. This standard defines two Combination Wave pulses (Open Circuit Voltage and Short Circuit Current). It set the number of pulses from the EMC test equipment to a.c. ports, d.c. ports, and interconnection lines, at 5 positive and 5 negative (a.c. at 0°, 90°, 180°, & 270°). The time per each pulse must be one minute or less and the EUT must be under operating conditions while the EMC testing is occurring.  EN IEC 61000-4-5 Open and Short Circuit Waveforms
For EN/IEC 61000-4-5 combination wave/surge rentals we offer a variety of different EMI test equipment suppliers including Teseq, EMC Partner, EM Test, Haefely, and many others to meet customer requirements and preferences. These products all have the capability to meet the surge requirements and each have unique testing and reporting capabilities. The most common rental units for surge testing are the NSG 3060, Axos 8, NX5, and UCS500n7. We also provide many accessories that may be required to complete unique and specific testing requirements. These EMI surge products come with an A2LA accredited calibration and free technical support included with the rental. EN IEC 61000-4-5 Surge Rental Products Picture

IEC 61000-4-5 - Surge/Combination Wave Generators

RENTAL

NX5 Rental - EM Test 5kV Surge & EFT Generator 16A. Coupler

The EM Test NX5 EMI test generator to 5.5kV EFT and 5kV surge with a built-in 16 amp single phase coupler. A2LA accredited calibration is included in the EMC rental equipment price. It is the most versatile tester to address transient and power fail requirements for both international and commercial standards. 

This Immunity Test Generator includes an easy-to-use color touch screen allow for efficiently changing of testing parameters. It can be operated manually from the intuitive front touch screen or remotely via its built-in Ethernet, USB or optical interface. The NX 5 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing.

This product includes many reprogrammed test routines ideal for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11 and CE Mark. This EM Test pulse generator includes internal single-phase Coupling/Decoupling Network (CDN) that can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 Amp per phase. With separate power mains supply inputs, it allows the utilization of different EUT supply voltages for maximum flexibility.

RENTAL

NX5 Rental - EM Test 5kV Surge & EFT Generator 32A. Coupler

The EM Test NX 5 EMI test generator to 5.5kV EFT and 5kV surge with a built-in 32A single phase coupler. A2LA accredited calibration is included in the EMC rental equipment price. It is the most versatile tester to address transient and power fail requirements for both international and commercial standards. 

This Immunity Test Generator includes an easy-to-use color touch screen allow for efficiently changing of testing parameters. It can be operated manually from the intuitive front touch screen or remotely via its built-in Ethernet, USB or optical interface. The NX5 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing.

This NX 5 includes many reprogrammed test routines ideal for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11 and CE Mark.  Its internal single-phase Coupling/Decoupling Network (CDN) can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 A per phase.

RENTAL

UCS 500N7 Rental - EM Test EFT to 5.5kV, Surge to 7kV and 100kHz Ring to 6kV, Built-in Single Phase Power Coupler

The EM Test UCS500N7 is an EMC Immunity Test equipment is an all in one box for testing EFT to 5.5kV, Surge to 7kV and 100kHz Ringwave to 6 kV, with built-in single phase coupler and software. This test equipment provides optional Dips and Interrupts testing with the V4780 S2 external variac. The UCS500N7 includes a built-in CDN for single phase it can be extended for testing three-phse DUT's by means of automatically controlled external coupling network up to 100A. 

This Immunity Test Generator can be operated via the front panel or by remote via the built-in USB or GPIB interface. Fail inputs allow control an ongoing test sequences based on the status of the DUT. Monitoring outputs (BNC) are offered for easy signal measurement and verification. This EMI test equipment provides a fully compliant that goes to levels beyond common testing requirements.

The UCS500n7 includes many reprogrammed test routines ideal for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11, EN/IEC 61000-4-12, CEMark, ANSI/IEEE C62.41 cat. B, EN IEC 61000-6-1, and EN IEC 61000-6-2. This product also includes both pre-programmed standard tests and a quick start menu allowing for parameters to be changed on-line during the test to evaluate the susceptibility level of an individual DUT. 

RENTAL

UCS500N5 Rental - EM Test EFT(5.5kV) & Surge(5kV) Immunity Generator Built-in Single Phase Coupler

The UCS500n5 by EM Test is an EMI test generator to 5.5kV EFT and 5kV surge with a built-in single phase coupler. A2LA accredited calibration is included in the EMC rental equipment price. This immunity test product can be operated manually from the front panel or by remote via the built-in USB or GPIB interface.

This EM Test Immunity Test Generator can be operated via Front panel menu and function keys enable the user to program his test routines quickly and accurately. Fail inputs allow to control an ongoing test sequence based on the status of the DUT. Monitoring outputs (BNC) are offered for easy signal measurement and verification. 

The UCS 500N5 includes both pre-programmed standard tests and a quick start menu allowing for parameters to be changed on-line during the test to evaluate the susceptibility level of an individual DUT. This EMC rental product is designed to test to EN/IEC 61000-4-4, EN/IEC 61000-4-5EN/IEC 61000-4-11CE Mark, and many others. The application areas for this immunity test product include telecom, medical, and components. 

RENTAL

EM Test CNV504 - Dataline Coupler

EMTest CNV504N1.3 coupling/decoupling networks for unshielded  unsymmetrical interconnection signal/data lines. Surge pulses or Ringwave pulses are applied to unshielded unsymmetrical interconnected lines by means of standalone coupling/decoupling networks for 4 signal/data lines.

CNV 504 N1.3 combines three different applications; coupling of Surge pulse via capacitor or gas arrestor and coupling of Ringwave pulses via capacitor being required by EN IEC 61000-4-5 and/or EN IEC 61000-4-12. The required coupling mode, Differential or Common, can easily be selected by means of a simple jumper.

In accordance with EN IEC 61000-4-5 and EN IEC 61000-4-12 pulses are coupled via different coupling elements such as capacitors or gas arrestors depending on the characteristics of the line signals.