IEC 61000-4-5 - Surge Test Equipment/Generators

Showing 1 to 9 of 13 products

SALE/RENTAL

Thermo Keytek module for ECATS.  The E 4554 A is three-phase ac line coupler/decoupler for surge and EFT modules requires the E103 controller, and a transient generator module, the E501b surge module, E411 EFT module or the E503 ringwave module can be rented / purchased at an additional cost.

Add to cart

RENTAL

Thermo Keytek three phase ac line coupler/decoupler for surge testing to 10kV and EFT testing with the ECAT system, requires the E103 controller.

RENTAL

The ECAT E103, E502 by Thermo Fisher/Keytek is designed to test to Telecommunications EMC standards requiring 6kV surge of 10x700µs or 9x720µs. This ECAT System comes with an A2LA accredited calibration and free technical support included with rental. This rental is a combination of the ECAT E103 control unit and E502 B modules.

This Thermo Fisher Scientific / Keytek EMC immunity generator provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with to be conducted efficiently without re-initializing the EUT between tests. The ECAT E502 B can be rented individually or in combination with the ECAT E103. 

This ECAT system is designed to test EN/IEC 61000-4-5 ed.3, FCC part 68, ITU k.17,ITU-T k.20, ITU-T k.21 and many other immunity standards that have a high voltage telecom surge component. The modular system of this Thermo Fisher / Keytek product provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. The E103 and E502 B combination can be controlled via front panel or through computer using Keytek software. 

SALE/RENTAL

In Stock

The ECAT E551 made by Thermo Fisher Scientific / Keytek is designed for single-phase AC line coupling/decoupling for surge wave modules. The E551 plug-in module requires the ECAT E103 control unit and an AC mains surge generator module. This Thermo Fisher / Keytek product is designed for testing to EN IEC 61000-4-5, ANSI/IEEE C62.41, UL 1449.

This Thermo Fisher Scientific / Keytek product provides monitoring and peak detection of surge voltage across any two manually-selected lines. Monitoring can be at the EUT or at the front panel of the coupler/decoupler. This product can be controlled via the front panel or with Keytek software via computer.

The modular system of the ECAT E551 has the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. This unit can be purchased with an ECAT E103 and AC mains surge generator for an entire EMC immunity setup. This cost effective solution is in excellent working conduction and software can be acquired with purchase.

Add to cart

SALE/RENTAL

In Stock

The ECAT E501B made by Thermo Fisher Scientific / Keytek is designed for single or three phase 6kV combination wave / surge testing. This Thermo Fisher Scientific EMI immunity test equipment comes with an A2LA accredited calibration included with rental or purchase. The E501B plug-in module requires the ECAT E103 control unit for use.

This Surge/Combination Wave EMI test Equipment provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with the E501B be conducted efficiently without re-initializing the EUT between tests. This unit can be easily integrated with preexisting ECAT system by sliding the E501B into open bay of the ECAT E103 control unit.

The ECAT E501B is designed to test EN/IEC 61000-4-5 and ANSI/IEEE C62.41. The modular system of the E501B provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. The E501B is the newest E501 series model after the E501A. This cost effective solution is in excellent working conduction and software can be acquired with purchase.

Add to cart

RENTAL

ECAT Surge/Combination Generator System Features 

      • Surge/Combination Wave Voltage up to 10 kV
      • ISO 17025 Calibration included
      • Includes - E103, E510 A, & E4551
      • Free Technical Support & 2 Days Free Transit
      • E4551 1-phase CDN 250V/16A

Thermo Keytek ECATS (ECAT E103, E510 A, E4551 kV)  with the E 510 biwave surge to 10kV, 5kA, with integrated single phase coupler/decoupler.

SALE/RENTAL

The ECAT E103, E501, and E4554 by Thermo Fisher Scientific / Keytek is designed to test to many EMC immunity standards requiring 6kV surge/combination wave with 3 phase power coupler/decoupler 480v, 32a EUT. This ECAT System comes with an A2LA accredited calibration and free technical support included with rental. This rental is a combination of the ECAT E103 control unit and E501, and E4554 modules.

This Thermo Fisher Scientific / Keytek EMC immunity generator provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with to be conducted efficiently without re-initializing the EUT between tests. The ECAT E501 can be rented individually or in combination with the ECAT E103. 

This ECAT system is designed to test EN/IEC 61000-4-5 ed.3, ANSI/IEEE C62.41, and UL 1449 and many other immunity standards that have a high voltage surge component. The modular system of this Thermo Fisher / Keytek product provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. The E103 and E501, E4554 combination can be controlled via front panel or through computer using Keytek software.

Add to cart

RENTAL

The ECAT E103, E411, E501B, E503 and E4554 by Thermo Fisher Scientific / Keytek are designed to test to a variety of immunity standards requiring three phase surge, EFT, & ringwave. This Thermo Fisher Scientific EMI immunity test equipment comes with an A2LA accredited calibration and free technical support included with rental. This rental is a combination of the ECAT E103 control unit and E411, E501B, E503 and E4554 modules.

This Thermo Fisher Scientific / Keytek EMC immunity generator provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with to be conducted efficiently without re-initializing the EUT between tests. The ECAT E411, E501B, and E503, can be rented individually or in combination with the ECAT E103. 

This ECAT system is designed to test EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-12, ANSI/IEEE C62.41, ANSI/IEEE C62.45 and many other EMC standards. The modular system of this Thermo Fisher / Keytek product is upgraded to meet the latest requirements of the IEC standards. The E103 and E411, E501B, E503, E4554 combination can be controlled via front panel or through computer using Keytek software.  

Add to cart

RENTAL

Thermo Keytek I/O and data line coupler for surges per EN IEC 61000-4-5.

Showing 1 to 9 of 13 products

Surge/Combination Wave - Multifunction Generators Rentals
Surge/Combination Wave - Multifunction Generators Rentals
EN/IEC 61000-4-5 - 2014 relates to immunity requirements for unidirectional surges caused by over-voltages from switching and lightning transients. This standard defines ranges of test levels, test equipment, test setups, and test procedures for equipment under test (EUT). The goal of this International Electrotechnical Commission (IEC) standard is a reproducible guide to evaluate equipment when exposed to this type of phenomena. It specifies that direct injections of lightning currents (direct lightning strikes) are not considered in this standard. The most recent 2014 version 3 cancels out previous publications and gives specifications for 10/700 µs combined wave generator. The most changes from version 2 fall underneath the test procedures section of the standard. This Standard can be purchased on the IEC Webstore.
EN IEC 61000-4-5 Peak to Peak and Voltage Test Levels
This IEC standard is based on a surge, a transient wave of electrical current, and is tested for by Immunity Test Equipment. This standard defines two Combination Wave pulses (Open Circuit Voltage and Short Circuit Current). It set the number of pulses from the EMC test equipment to a.c. ports, d.c. ports, and interconnection lines, at 5 positive and 5 negative (a.c. at 0°, 90°, 180°, & 270°). The time per each pulse must be one minute or less and the EUT must be under operating conditions while the EMC testing is occurring.  EN IEC 61000-4-5 Open and Short Circuit Waveforms
For EN/IEC 61000-4-5 combination wave/surge rentals we offer a variety of different EMI test equipment suppliers including Teseq, EMC Partner, EM Test, Haefely, and many others to meet customer requirements and preferences. These products all have the capability to meet the surge requirements and each have unique testing and reporting capabilities. The most common rental units for surge testing are the NSG 3060, Axos 8, NX5, and UCS500n7. We also provide many accessories that may be required to complete unique and specific testing requirements. These EMI surge products come with an A2LA accredited calibration and free technical support included with the rental. EN IEC 61000-4-5 Surge Rental Products Picture