Surge/Combination Wave - Multifunction Generators Rentals
Surge/Combination Wave - Multifunction Generators Rentals
EN/IEC 61000-4-5 - 2014 relates to immunity requirements for unidirectional surges caused by over-voltages from switching and lightning transients. This standard defines ranges of test levels, test equipment, test setups, and test procedures for equipment under test (EUT). The goal of this International Electrotechnical Commission (IEC) standard is a reproducible guide to evaluate equipment when exposed to this type of phenomena. It specifies that direct injections of lightning currents (direct lightning strikes) are not considered in this standard. The most recent 2014 version 3 cancels out previous publications and gives specifications for 10/700 µs combined wave generator. The most changes from version 2 fall underneath the test procedures section of the standard. This Standard can be purchased on the IEC Webstore.
EN IEC 61000-4-5 Peak to Peak and Voltage Test Levels
This IEC standard is based on a surge, a transient wave of electrical current, and is tested for by Immunity Test Equipment. This standard defines two Combination Wave pulses (Open Circuit Voltage and Short Circuit Current). It set the number of pulses from the EMC test equipment to a.c. ports, d.c. ports, and interconnection lines, at 5 positive and 5 negative (a.c. at 0°, 90°, 180°, & 270°). The time per each pulse must be one minute or less and the EUT must be under operating conditions while the EMC testing is occurring.  EN IEC 61000-4-5 Open and Short Circuit Waveforms
For EN/IEC 61000-4-5 combination wave/surge rentals we offer a variety of different EMI test equipment suppliers including Teseq, EMC Partner, EM Test, Haefely, and many others to meet customer requirements and preferences. These products all have the capability to meet the surge requirements and each have unique testing and reporting capabilities. The most common rental units for surge testing are the NSG 3060, Axos 8, NX5, and UCS500n7. We also provide many accessories that may be required to complete unique and specific testing requirements. These EMI surge products come with an A2LA accredited calibration and free technical support included with the rental. EN IEC 61000-4-5 Surge Rental Products Picture

IEC 61000-4-5 - Surge/Combination Wave Generators

Showing 28 to 31 of 31 products

RENTAL

Thermo Keytek CM 3CD - SRG 3-Phase Surge Coupler/Decoupler For The EMC Pro Plus

The CM 3CDSrg from Thermo Keytek is a three phase external coupler for EN IEC 61000-4-5 surge tests for the EMC ProPlus.

RENTAL

EMCPro Plus Rental - Keytek Immunity Surge & Transient Generator

The EMCPro Plus made by Thermo Fisher Scientific is a 6 kv Generator for EFT to 4.4kV, Surge to 6kV, 100 kHz Ringwave to 6kV, Dips and Interrupts with a built-in single phase coupler. All of our EMC Immunity generators come with an A2LA calibration & technical support. Additional test capabilities such as the 10x700 Telecom Wave is available on request.

This EMI Immunity Generator is an easy to use, cost effective solution to a diverse set of testing needs. This system provides easy to use front panel display and can be controlled via computer through windows based software. The EMCPro also monitors output of the coupling unit and automatically switches connections according to coupling mode.

The EMCPro Plus is designed to test for a variety of EMC immunity industry standards including EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11, EN/IEC 61000-4-12, CEMark, and ANSI IEEE C62.41 cat. B. The EMCPro Plus rental equipment It also can also be configured for custom test protocols to meet specific test requirements using the software and a full line of options and accessories.

RENTAL

EM Test CNV504 - Dataline Coupler

EMTest CNV504N1.3 coupling/decoupling networks for unshielded  unsymmetrical interconnection signal/data lines. Surge pulses or Ringwave pulses are applied to unshielded unsymmetrical interconnected lines by means of standalone coupling/decoupling networks for 4 signal/data lines.

CNV 504 N1.3 combines three different applications; coupling of Surge pulse via capacitor or gas arrestor and coupling of Ringwave pulses via capacitor being required by EN IEC 61000-4-5 and/or EN IEC 61000-4-12. The required coupling mode, Differential or Common, can easily be selected by means of a simple jumper.

In accordance with EN IEC 61000-4-5 and EN IEC 61000-4-12 pulses are coupled via different coupling elements such as capacitors or gas arrestors depending on the characteristics of the line signals.

SALE/RENTAL

Thermo Keytek ECAT E103, E411, E501 B, and E4554 - Rent or Buy (used) - Three Phase Surge and EFT System

Thermo Keytek ECATS for EFT and Surge system, with the E501b surge generator to 6kV and the E411 EFT / Burst generator to 4.4kV with 3 phase coupler/decoupler for EN & IEC 61000-4-4,-5,-12, ANSI C62.41,C62.45.  Upgraded to meet the latest editions of the IEC standards.

 

Add to cart

Showing 28 to 31 of 31 products