EN/IEC 61000-6 - Rental EMC Immunity & Emissions Equipment
Showing 1 to 9 of 29 products
The NSG4070 by Teseq is a multifunctional device for carrying out EMC testing for conducted and radiated immunity. A2LA accredited calibration is included in the conducted RF generator rental price. The third generator provides efficient and effective means to create testing reports and connect EUT monitoring. This test system is ideal for bulk current injection (BCI) testing.
This Conducted RF Immunity Test Generator modular set-up using internal or external amplifiers enables a large variety of applications. The powerful and easy to use firmware from an external PC and control software, however it can also be remote controlled for system operation. A state-of-the-art data transfer of test and measurement data for documentation is provided by USB stick to be plugged into the front pane.
The NSG 4070 was designed to testing in accordance to EN/IEC 61000-4-6, EN/IEC 60601-1-2, EN/IEC 61000-4-20, EN/IEC 61000-4-21 and several automotive standards. This immunity test product provides various sweep methods which can be selected to suit each particular testing parameter. This Teseq conducted RF test equipment also allows for all coupling methods to be simply and easily connected and calibrated.
The NSG 435 by Teseq is a comprehensive ESD Simulation System for air discharge to 16.5 kV and contact mode to 9 kV. Transient Specialists is the only authorized sale partner of Teseq ESD simulators in the United States The rental includes an A2LA accredited calibration and technical support included in the price. This product comes standard with an 150pF/330Ω discharge network and tips for both air and contact discharge.
The pistol-shaped NSG 435 ESD Simulator is designed to sit comfortably in the operator’s hand, with current operating conditions constantly displayed and clearly visible. It also allows for use in environments without easily accessible power supplies where other test equipment require additional consideration. The user-selected test parameters are shown on the LCD panel and easily adjusted with the keypad.
This ESD generators microprocessor-based controller and multi function keypad provide the operator with instant access to its comprehensive range of built-in functions. The product comes with IEC 61000-4-2 and ANSI C63.16 test settings pre-programmed to allow for tests to be run efficiently. The voltage of this Teseq product can also be programmed from 200 V to 16.5 kV depending on your EMC testing requirements.
The Teseq NSG437 ESD gun allows for testing to 30kV air and contact (150pf/330Ω) with a simple and easy to use design. Transient Specialists is the only authorized sale partner of Teseq ESD simulators in the United States. It provides functions very similar to its competitors the Haefely ONYX 30 and the EM test ESD NX30. It includes an accredited calibration and technical support is included in the rental equipment price. This equipment is an ideal solution for field testing as voltage levels can be easily modified for efficient testing to and above several standards.
This test equipment allows for manipulation of testing parameters for EN IEC 61000-4-2, ANSI C63.16 through the use of the display. It is designed to sit comfortably in the operator’s hand, with operating conditions constantly displayed and accessible on a bright, clear color touch display. This product is unique in offering an activity log where the number and type of simulations can be verified by time frame and standard.
The NSG 437 ESD Simulator has a color touch display and keypad for parameter input shows the precise functional and test data with user-selectable language for convenient and safe operation worldwide. The simulator contains variable threshold selection for accurate discharge detection. This detection feature can be switched off when testing EUT’s with non-conductive surfaces, such as plastic housings. This product is part of the Teseq electrostatic generator line of products including the NSG 435 and NSG 438.
The Keytek MZ-15 ESD simulator by Thermo Fischer Scientific allows for air discharge to 15kV and contact mode to 8kV with simple, intuitive operation. A2LA accredited calibration is included in the EMC rental equipment price. The MZ-15 also known as the Keytek Minizap, is light weight and durable lending itself well to long-term use in harsh environments in the field. It is also one of the more well-known simulators, the design remaining almost uncharged over 20 years.
This electrostatic discharge generator is ideal for testing to EN IEC 61000-4-2, ANSI C63.16, and others through manipulation output voltage selection and pulse repetition rate selector knobs. The interchangeable plug-in tips allow for testing to different standards. The polarity can be switched on the test equipment by switching the output polarity selection on the side of the equipment.
The Minizap ESD simulator does not use a voltage multiplier, and won’t introduce testing errors and uncertainties due to streams of artificial, high-level ESD multiples generated by a human discharge or by other simulators. The Keytek simulator is easily mounted on a tripod allowing for tests to be ran consecutively without user fatigue. Real time voltage is displayed via the actual output voltage indicator with accuracy typically at +/- 3% for this product.
The CBA 1G-600B has the capacity to produce a 600W 80MHz to 1GHz and can be controlled via front panel or via latop with USB, GPIB, RS232 and Ethernet connections. It is compatible and can be easily integrated with a wide variety Teseq products and test systems. The minimum of 500W linear power makes it a excellent solution for RF immunity testing for a variety of applications including military, automotive, and aerospace applications.
This EMC test equipment is often used for RF immunity testing to IEC 61000-4-3, MIL-STD 461, ISO 11452, RTCA DO-160, and many others. We also carry the CBA 1G-300B, which provide 300W capabilities with the same frequency range. It is often included in test setups with associated Teseq products, including the NSG 4070 and ITS 6006. The touch screen front panel gives immediate fedback and provides information including operating status and heatsink temperature.
Our amplifiers provide turnkey solutions coming with required cords and accessories. The inbuilt fan speed automatically adjusts according to the heatsink temperature ensuring the minimum audio noise level. To supplement testing, we also rent many other amplifiers including S251-300 (800MHz-2.5Ghz 300w) and AS0860-50 (800Mhz-6Ghz 50W).
Rent the Dito by EM Test a hand-held, lightweight ESD simulator that allows for air discharge to 16.5kV and contact mode to 10kV for testing to IEC 61000-4-2. A2LA accredited calibration is included in the EMC rental equipment price.Transient Specialists is the only authorized sale partner of EM Test ESD simulators in the United States. EM Test a leading manufacturer of electronic test equipment has created this product to simulate an electrostatic discharge between two different objects including the human body.
The Dito rental comes with an 150pF/330Ω discharge network for testing to IEC 61000-4-2 and other EMC immunity testing standards. This cordless ESD simulator is powered by a rechargeable battery and has enough energy to 50,000 pulses at 16.5kV. Discharge tips and discharge networks can easily be changed without disassembling the gun; simply remove one and plug-on another tip or module
This EM Test generator comes with pre-programmed test routines allowing for user to easily test to EN IEC 61000-4-2, ANSI C63.16, and many others. The discharge modules are automatically recognized and the R/C configuration is shown in the display of the test equipment. The display is easy to manipulate and requires minimal effort to change testing parameters. The Dito rental comes with both air and contact discharge tips.
Rent the EMC Partner ESD3000 DN1 (150pF/300Ω) a hand-held, lightweight, electrostatic discharge gun for air and contact discharge to 30kV. The DN1 Resistance Capacitance (RC) Network is a 150pF / 330Ω module for up to 30kV, requiring the RM32. This unit is similar in function to its competitors, the Haefely Onyx30 and the EM Test ESD NX30. An A2LA accredited calibration and technical support is included in the rental equipment price. The module is available for rent separately from the simulator or as a combined unit.
The design of the interface for this ESD test equipment offers the user a quick way to change test parameters with one hand. EMC Partner software comes with the ESD 3000 DN1 rental allowing for remote control and reports to be generated. The ESD gun can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.
The EMC Partner product can be run with AA batteries or rechargeable battery pack. Electronic polarity reversal, including alternating polarity, is provided with this electrostatic discharge generator. The 30kV discharge allows for testing past the required voltages of many standards including EN IEC 61000-4-2, ANSI C63.16 and many others standards with 30kV requirements.
The Teseq (previously Schaffner) NSG 3060 EMC Immunity generator provides testing for EFT(electrical fast transients) to 4.8kV, Surge to 6.6kV, 100kHz ring wave to 6.6kV and offers solutions for both CE mark, ANSI, and IEC testing. A2LA accredited calibration is included in the EMC rental equipment price. It includes both coupling methods associated with IEC and ANSI EMC testing standards. We also offer a variety of accessories available for rent, including the CDN 3083 series (CDN3083-S100 & CDN3083-B100), allowing for enhanced testing capabilities.
This multifunction generator offers a user-friendly design to help streamline testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN 61000-4-12, ANSI C62.41, C62.45, and UL 1449. It offers a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel. This system is often rented with the CDN 3061 (coupling decoupling network) allowing for single phase coupling up to 270V/16A.
This Immunity Test Generator has a Ethernet port for connect with a PC and includes window based software. This simplifies electromagnetic compatibility testing allowing for compilation of complex test sequences with diverse pulse types. The software with the NSG3060 test set enables the user to create reports and enter observations as the test progresses increasing the efficiency of long-term tests.
The Teseq NSG 437 electrostatic simulator allows for testing to 30 kV with a simple and easy to use design. Transient Specialists is the only authorized sale partner of Teseq ESD simulators in the United States. A2LA accredited calibration and technical support is included in the rental equipment price. This electrostatic discharge generator has easily adjustable voltage allowing for efficient testing to several standards with a single unit.
This ESD test equipment allows for manipulation of testing parameters for EN/IEC 61000-4-2, ANSI C63.16, ISO 10605, and TR 10605 through the use of the display. It is designed to sit comfortably in the operator’s hand, with operating conditions constantly displayed and accessible on a bright, clear color touch display. This Teseq product is unique in offering an activity log where the number and type of simulations can be verified by time frame and standard.
This ESD Simulator has a color touch display and keypad for parameter input shows the precise functional and test data with user selectable language for convenient and safe operation worldwide. The simulator contains variable threshold selection for accurate discharge detection. This detection feature can be switched off when testing EUT’s with non-conductive surfaces, such as plastic housings. This test equipment is part of Teseq's simulator line including the NSG 435 and NSG 438.