Cost Effective ESD Testing Solutions - Teseq, EMC Partner, EM Test, & Keytek
Cost Effective ESD Testing Solutions - Teseq, EMC Partner, EM Test, & Keytek
ESD simulator rentals, as known as ESD guns, provide a cost-efficient solution for electrostatic discharge testing, limiting capital required to complete testing. This type of EMC test equipment duplicates the release of electrical energy between two objects that have a potentially different voltage. This discharge can be caused by built up static electricity and often times can create a visible spark. Electrostatic Discharge is a key element of electromagnetic immunity testing. Common testing standards include EN/IEC 61000-4-2, MIL-STD-883, ISO 10605, and ANSI C63.16. We carry a diverse set discharge networks including automotive, military/avionic, and human body model testing to facilitate customer testing requirements.

There are two different methods for testing for ESD, air and contact. All of our ESD generator rentals provide tips for both air and contact testing. The contact testing method maintains constant physical contact between the simulator and the EUT during discharge. This method is preferred by many standards as it eliminates environmental factors such as humidity and temperature. IEC 61000-4-2 states "Contact discharge is the preferred test method. Air discharges shall be used where contact discharge cannot be applied."  The air discharge testing method is accomplished when moving the simulator towards the EUT until discharge. This method is the most common in field testing environments as it most closely simulates the real-world phenomenon. Testing is also done using both the positive and negative polarities. ESD Test Equipment Waveform - IEC 61000-4-2 Waveform
Electrostatic discharge is a commonly occurring electrical event and is mentioned and tested to by a wide variety of standards. Many standards have different criteria for replicating this discharge, often similar categories of testing have comparable requirements. These requirements were developed taking into consideration the given environment of the equipment under test. Often times, these require special consideration when considering choosing the most effective simulator to complete testing. We provide ESD simulator/ESD gun rentals for the list standards shown in the table below. Automotive testing requires special consideration given the many manufacturer standards and requirements. ESD Simulator Networks, Test Levels, and Related Standards  
ESD simulators duplicate this discharge and waveform allowing for testing of equipment to ensure functionality in anticipated environment. We offer a variety of simulators for rent each having benefits depending on testing needs. However, the majority of simulators have three major components a discharge tip, the unit holding electronics, and the power supply. Some configurations require a cord that ties directly to the power supply while others provide a cordless option. We also offer different ranges in voltages that can go up to 30kV. We offer from rentals from all the major suppliers including Teseq, EM Test, EMC Partner, and Thermo-Keytek. Our EMC test equipment rental customers have the ability to both rent and purchase these products online via our website. All our electrostatic discharge test equipment comes with an A2LA accredited. ESD Simulator/ESD Gun rental Simplified Diagram

ESD Simulator Rental - Electrostatic Discharge Generators

Showing 1 to 9 of 11 products

SALE/RENTAL

ESD3000 Rental - EMC Partner 16kV ESD Simulator IEC 61000-4-2

Rent the ESD3000 DM1 by EMC Partner a hand-held, lightweight, electrostatic discharge, ESD simulator for air discharge to 16kV and contact mode to 10kV. This programmable ESD gun has many discharge modules available which can be easily interchanged depending on EMC testing needs. We provide rentals of modules for a variety of applications and test levels to 30kV. A2LA accredited calibration and technical support is included with this electrostatic discharge generator.

The design of the interface for this ESD Test Equipment offers the user a quick way to change test parameters with one hand. EMC Partner software comes with the equipment allowing for remote control and reports to be generated. It can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.

The EMC Partner test equipment can be run with AA batteries or rechargeable battery pack, which are provided with the rental. Electronic polarity reversal, including alternating polarity, is provided with this ESD simulator. This tester offers an easy to use solution for EN IEC 61000-4-2, ANSI C63.16 and many others electrostatic discharge related standards.

Out of Stock

SALE/RENTAL

EMC Partner ESD3000 DN1 for Rental or Used Purchase - 30kV ESD Simulator

Rent the EMC Partner ESD3000 DN1 (150pF/300Ω) a hand-held, lightweight, electrostatic discharge gun for air and contact discharge to 30kV. The DN1 Resistance Capacitance (RC) Network is a 150pF / 330Ω module for up to 30kV, requiring the RM32. This unit is similar in function to its competitors, the Haefely Onyx30 and the EM Test ESD NX30.  An A2LA accredited calibration and technical support is included in the rental equipment price. The module is available for rent separately from the simulator or as a combined unit.  

The design of the interface for this ESD test equipment offers the user a quick way to change test parameters with one hand. EMC Partner software comes with the ESD 3000 DN1 rental allowing for remote control and reports to be generated. The ESD gun can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.

The EMC Partner product can be run with AA batteries or rechargeable battery pack. Electronic polarity reversal, including alternating polarity, is provided with this electrostatic discharge generator. The 30kV discharge allows for testing past the required voltages of many standards including EN IEC 61000-4-2, ANSI C63.16 and many others standards with 30kV requirements.

Out of Stock

SALE/RENTAL

ESD3000 DM4 Rent & Buy - ESD HBM Simulator Rentals

The ESD3000 DM 4 by EMC Partner is a hand-held, lightweight, electrostatic discharge gun provides ESD HBM simualation. The DM4 provides the 100pf/1500Ω Human Body Model (HBM) Resistance Capacitance (RC) network required for testing to MIL-STD-883. A2LA accredited calibration and technical support is included in the rental equipment price. The simulator and networks can be rented together, or the network can be rented individually.

EMC Partner software comes with the electrostatic discharge generator allowing for remote control and reports to be generated. The design of the interface for this ESD gun offers the user a quick way to change test parameters with one hand. It can also easily be mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue

The EMC Partner test equipment can be run with AA batteries or rechargeable battery pack. Electronic polarity reversal, including alternating polarity, is provided with the test equipment. This HBM ESD tester is ideal for testing to MIL-STD-883 and many standards that require testing relating to the human body model.

Out of Stock

RENTAL

ESD3000 DN2 330pF/2KΩ 30kV Rental - ISO 10605 Test Equipment

The DN-2 (330pF/2KΩ) network by EMC Partner with the ESD 3000 a hand-held, lightweight, electrostatic discharge gun for air and contact discharge to 30kV. The DN2 Resistance Capacitance (RC) Network allows for testing with 330pF/2kΩ and requires the RM32 for all testing. A2LA accredited calibration and technical support is included in the rental equipment price.

EMC Partner software comes with this Automotive EMC Test Equipment allowing for remote control and reports to be generated. The design of the interface for the ESD3000 DN 2 offers the user a quick way to change test parameters with one hand. To facilitate additional testing capabilities this simulator allows networks to be easily removed by loosing bottom nob and removing/adding networks. The ESD gun can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.

This electrostatic discharge test equipment can be run with AA batteries or rechargeable battery pack. Electronic polarity reversal, including alternating polarity, can also be accomplished by the simulator. The networks capabilities allow for testing to ISO 10605, JASO, SAE J1113, TR 10605 and other automotive specs to 30kV.

Out of Stock

RENTAL

ESD3000 DN3 150pF/2KΩ 30kV Rental - ISO 10605 Test Equipment

The DN3 by EMC Partner with the ESD 3000 is a hand-held, lightweight, electrostatic discharge gun for air and contact discharge to 30kV. The DN3 Resistance Capacitance (RC) Network allows for testing with 150pF/2kΩ and requires the RM32 for all testing. A2LA accredited calibration is included in the EMC rental equipment price.

EMC Partner software comes with the Automotive EMC Test Equipment rental allowing for remote control and reports to be generated. The design of the interface for the ESD3000 DN 3 offers the user a quick way to change test parameters with one hand. The ESD gun can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.

The EMC Partner test equipment can be run with AA batteries or rechargeable battery pack. Electronic polarity reversal, including alternating polarity, is provided with the ESD3000. The networks capabilities allow for testing to ISO 10605, JASO, SAE J1113, TR 10605 and other automotive specs to 30kV

Out of Stock

RENTAL

ESD3000 DN6 300pF/330Ω 30kV Rental - ISO 10605 Test Equipment

The DN6 by EMC Partner with the ESD 3000 is a hand-held, lightweight, electrostatic discharge gun for air and contact discharge to 30kV. The DN6 Resistance Capacitance (RC) Network allows for testing with 330pF/330Ω and requires the RM32 for all testing. A2LA accredited calibration is included in the EMC rental equipment price.

EMC Partner software comes with the Automotive EMC Test Equipment rental allowing for remote control and reports to be generated. The design of the interface for the ESD3000 DN-6 offers the user a quick way to change test parameters with one hand. The ESD gun can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.

The EMC Partner test equipment can be run with AA batteries or rechargeable battery pack. Electronic polarity reversal, including alternating polarity, is provided with the ESD3000 DN6. The networks capabilities allow for testing to ISO 10605, JASO, SAE J1113, TR 10605 and other automotive specs to 30kV

Out of Stock

SALE/RENTAL

DM1 150pf/330‎Ω Network Rent & Buy - IEC 61000-4-2

The DM1 (Discharge Module 1) by EMC Partner provides 150pf/ 330Ω Resistance Capacitance (RC) network for air discharge to 16kV and contact mode to 10kV. The discharge network requires the ESD 3000 unit to be used which is priced separately. A2LA accredited calibration is included in the EMC rental equipment price. The DM 1 DN allows for testing to standards to EN IEC 61000-4-2, ANSI C63.16and many others.

Out of Stock

SALE/RENTAL

DM4 HBM ESD Network Rent & Buy - MIL-STD-883/IEC 61000-4-2

The DM4 (Discharge Module 4) by EMC Partner provides 100pf/1500 Ω  HBM Resistance Capacitance (RC) network required for air discharge to 16kV and contact mode to 10kV. The discharge network requires the ESD 3000 unit to be used which is priced separately. A2LA accredited calibration included in the EMC rental equipment price. The DM4 DN allows for testing to standards to MIL-STD-883 and many others.

Options:
  • Rental 1 Week $175.00
  • Rental 1 Month $345.00
  • Used Purchase $2,190.00

RENTAL

DN2 330pF/2kΩ Network Rental - ISO 10605 Test Equipment

The DN 2 by EMC Partner is a 330 pf/ 2k ohm Resistance Capacitance (RC) network for air discharge and contact mode to 30kV. This Discharge network requires the ESD 3000 and RM32 to be used which are priced separately. A2LA accredited calibration included in the EMC rental equipment price. The DN2 network allows for testing to standards for both ISO 10605 and TR10605.

Options:
  • Rental 1 Week $175.00
  • Rental 1 Month $349.00

Showing 1 to 9 of 11 products