Description
Overview
The NSG 437 Auto is a variation on the popular 30kV Teseq series of ESD simulators/Guns. Rent and Buy it today from the only authorized sale partner of Teseq ESD simulators in the United States. This simulator/gun is provides testing to IEC 61000-4-2, ISO 10605, and many manufacturer standards. It comes standard with an ISO 17025 accredited calibration and up to two free days for transit. The three additional networks that are included with the standard NSG 437 simulator and 150pf/330Ω network are the 330pf/330Ω, 150pf/2kΩ, and 330pf/2KΩ.
Data SheetUser ManualTeseq - ESD BrochureSpecifications
Common Standards |
IEC 61000-4-2, ANSI C63.16, ISO 10605, SAE J1113, FMC 1278, GMW 3097 |
Voltage Range Air Discharge |
+/- 200V to 30kV |
Voltage Range Contact Mode |
+/- 200V to 30kV |
RC Networks |
150pf/330Ω, 330pf/330Ω, 150pf/2kΩ, 330pf/2kΩ, |
Resolution |
100 V |
Repetition Rate |
Air 0.5/1/5/10/20 or 25 Hz Contact 0.5/1/5/10/20 Hz |
Programmable |
voltage and polarity |
Weight |
5.52 kg, 15.2 pounds |
All Accessories
Common Testing Accessories NSG 437/NSG 438 ESD Simulator:
INA/Item # | Description |
403-826 |
Air Discharge Tip |
403-827 | |
INA 4414 |
Air discharge ball (Discharge sphere). 25 mm diameter test tip adapter to be fixed on 8 mm air discharge test finger |
INA 4421 | Tripod support for NSG 437, 438. To adapt NSG 437 or 438 pistols to classics tripods as generally used for cameras. (tripod not included) |
INA 4430 |
Charge remover (for NSG 438 and NSG 439 series only) |
INA 4421 |
Fast risetime test tip. Where the rise time of 0,8 ns specified in most standards represents more than 80% of real cases. |
INA 4415 |
Flexible tip set. Where the application makes access of EUT discharge point difficult. |
INA 4416 |
Soft touch contact tip. Very convenient adapter tip to test connector pins. |
INA 4417 |
Banana contact tip. To adapt to 4 mm banana plugs. |
INA 4418 |
Banana fastrisetime tip. To adapt to 4 mm banana plugs. |
INA 4420 |
H-field adapter |
201-264B/201-265 |
NSG 435 Casing - housing left and right side |
INA 4423 |
Carry case for NSG 437/438. Includes foam with professional cut outs for NSG 437, 438 and accessories. |
General ESD Testing Accessories:
INA/ITEM # | Description |
MD 102 | MD 102A Calibration target as per IEC 61000-4-2 with 2ohm for calibration/verification |
INA 414-2M | Bleeder resistor cable (2x470 kOhms) - Length 2 meters |
INA 414 |
Bleeder resistor cable (2x470 kOhms) - Length 80 cm |
INA 102A | 50 Ohm Calibration adapter for MD 102 |
INA 417B | Opto-link to a PC with 10 m opto-cable |
Videos
Teseq: NSG series of Simulators
Description: This video made by Teseq, formerly Schaffner, offer a video guide for the NSG series of simulators,
which include the NSG 435, NSG 437, NSG 438, and NSG 439. This video is a brief overview of each ESD Gun/test system.