IEC 60601-1-2 Rentals - Medical EMC Immunity Test Equipment

Showing 1 to 9 of 19 products

RENTAL

In Stock

Automotive Immunity Generator Features 

      • ISO 7637-2 & OEM - Single Unit Solution!
      • Laptop with Software & ISO 17025 Calibration
      • Includes - +ARB, LD5550, MT5511, & Software
      • Free Technical Support & 2 Days Free Transit
      • PA 5480 (Batter Simulators) - 25A & 100A Rentals
      • Prorated Daily Rate After First Month
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq NSG 5500 rental offers solutions for transient immunity testing based on ISO 7637-2 pulses 1, 2a, 3a, 3b, and the load dump pulses from ISO 16750-2.  It includes the +ARB Option for pulses 2b and 4. Our rental systems also have built in the MT5511, LD5550, +ARB, and come with Autostar Software with a laptop to control the unit(s). All of our automotive rentals include an accredited calibration in the rental price. This Teseq automotive transient generator includes a coupler/battery switch for testing requiring battery coupling. 

The NSG 5500 system allows for testing to international, commercial, and company specific standards including. The Arbitrary waveform generator option supports >64,000 segments plus 1GB of Clone data with up to 10Ms/s 16 bit operation. Control of the testing parameters is done through PC running AutoStar™ software. This Teseq automotive immunity generator rental offers testing to be completed through a single output connector.

This turnkey product comes with a laptop with software pre-installed for efficient testing. Additional inputs and outputs are located on the rear panel for test execution control purposes and monitoring. It is the first product to offer a completely internal 100 amp. battery switch for transient immunity testing. These rental transient immunity generators can be used with the PA 5840-300 battery Simulator or the PA 5840-75 Battery Simulator.

RENTAL

In Stock

Conducted Immunity Surge & EFT Generator

      • 5kV Surge/Bi-wave 5.5kV 1-phase 300v/16a Coupler 
      • ISO 17025 Accredited Calibration Included
      • Smallest compact generator with 7" touch screen
      • Built-in single phase CDN up to 400 V/32 A
      • Free Technical Support & 2 Days Free Transit
      • Manual front panel operation with setup pictures
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Rent the EM Test NX5 EMI test generator to 5.5kV EFT and 5kV surge with a built-in 16 amp single phase coupler (300V/16Amps). This test system provides an ultra compact, easy to use, touch screen allowing for effective testing. The NX 5 series comes in many variations incluing the NX 5 32Amp Coupler. It is the most versatile tester to address transient and power fail requirements for both international and commercial standards. An ISO 17025 accredited calibration and associated cords is included with the rental.

This Immunity Test Generator includes an easy-to-use color touch screen allow for efficiently changing of testing parameters. It can be operated manually from the intuitive front touch screen or remotely via its built-in Ethernet, USB or optical interface. The NX 5 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing.

This product includes many reprogrammed test routines ideal for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11 and CE Mark. This EM Test pulse generator includes internal single-phase Coupling/Decoupling Network (CDN) that can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 Amp per phase. With separate power mains supply inputs, it allows the utilization of different EUT supply voltages for maximum flexibility.

RENTAL

In Stock

Conducted & Radiated RF Immunity Test Setup Features 

      • Conducted & Radiated Solution - IEC 61000-4-6
      • Laptop & ISO 17025 Calibration Included
      • Integrated signal generator 9 kHz - 1 GHz
      • Integrated class A power Amplifier 35W, 45W, 80W
      • Free Technical Support & 2 Days Free Transit
      • 3 power meter inputs 9 kHz to 1 GHz
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The NSG4070 by Teseq is a multifunctional device for carrying out EMC testing for conducted and radiated immunity testing to a variety of standards. Take advantage of ISO 17025 calibrations, a variety of accessories, a quick delivery on this compact equipment.This Conducted RF Immunity Test Generator modular set-up using internal (80 Watts) or external amplifiers enables a large variety of applications. 

The powerful and easy to use firmware from an external PC and control software, however it can also be remote controlled for system operation. A state-of-the-art data transfer of test and measurement data for documentation is provided by USB stick to be plugged into the front pane. 

The NSG 4070 was designed to testing in accordance to EN/IEC 61000-4-6, EN/IEC 60601-1-2, EN/IEC 61000-4-20, EN/IEC 61000-4-21 and several automotive standards. This immunity test product provides various sweep methods which can be selected to suit each particular testing parameter. This Teseq conducted RF test equipment also allows for all coupling methods to be simply and easily connected and calibrated.

RENTAL

Conducted Immunity Generator Features 

      • 4.1kV Bi-wave Surge & 4.4kV EFT/Burst
      • Newest Model! TRA3000 Replacement!
      • ISO 17025 Calibration included
      • Free Technical Support & 2 Days Free Transit
      • Display information with any web browser
      • Same Platform for IEC 61000-4-16 Solution
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The EMC Partner IMU4000 EMI (Optional: Common Mode) test generator is an all in one unit testing solution for testing to EFT to 4.4kV and Surge to 4.1kV with built-in single phase coupler, and Dips under 6 amps. A2LA accredited calibration is included in the EMC rental equipment price. This products "Plug and Play" architecture allows for system to automatically identify hardware then re-configure testing menu to reflect the change.

This Immunity Test Generator has been created for CE transient testing as well as fulfilling IEC basic standard requirements. The IMU 4000 includes both an Ethernet Port for control communication and test reporting that includes laboratory environmental conditions.This EMC tester is a environmentally conscience solution with low power consumption, less noise, and less heat. 

The IMU 4000 is a single unit testing system for EN/IEC 61000-4-4, EN/IEC 61000-4-5EN/IEC 61000-4-11and CE Mark. With the common mode available for testing to EN/IEC 61000-4-16 this design offers flexibility depending on testing needs. As an added bonus EMC Partner does not require proprietary software all reports are HTML based and can be viewed with web browsers.

RENTAL

In Stock

Conducted Immunity Generator Features 

      • 6.6kV Surge & 100kHz Ring Wave, EFT 4.8kV
      • Laptop & ISO 17025 Calibration included
      • CDNs - Single/Three phase up to 620V/100A
      • Free Technical Support & 2 Days Free Transit
      • Touch Panel Screen, Easy to use Architecture 
      • Both IEC and ANSI coupling methods
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq (previously Schaffner) NSG 3060 EMC Immunity generator provides testing for EFT(electrical fast transients) to 4.8kV, Surge to 6.6kV, 100kHz ring wave to 6.6kV and offers solutions for both CE mark, ANSI, and IEC testing.  A2LA accredited calibration and two free days of transit time is included in the rental equipment priceIt includes both coupling methods associated with IEC and ANSI EMC testing standards. We also offer the full line of accessories available for rent, including the CDN 3083 series (CDN3083-S100 & CDN3083-B100), allowing for enhanced testing capabilities. 

This multifunction generator offers a user-friendly design to help streamline testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN 61000-4-12, ANSI C62.41, C62.45, and UL 1449. It offers a 7" color screen and easy to manage user-interface allowing for easy adjustments with the thumb-wheel. This system is often rented with the CDN 3061 (coupling decoupling network) allowing for single phase coupling up to 270V/16A.

This Immunity Test Generator has a Ethernet port for connect with a PC and includes window based software. This simplifies electromagnetic compatibility testing allowing for compilation of complex test sequences with diverse pulse types. The software with the NSG3060 test set enables the user to create reports and enter observations as the test progresses increasing the efficiency of long-term tests.

RENTAL

In Stock

The MegaPulse Debif D5-5P by Compliance West tests to 5,000 volts including direct energy readout (J) for energy reduction tests, built-in pass/fail reference. Our EMC test equipment rentals come with an A2LA accredited calibration and technical support. This medical based immunity testing equipment displays selected output voltage on digital front panel.

The Immunity Generator defibrillator proof test set to The Mega Pulse DefibD5-PF offers a USB computer connection for remote operation. This allows for increased flexibility in setups, and offers more robust and problem resistant connection. On the test equipment side, the interface is RS-232, which offers a stronger, more error-free protocol for more trouble-free operation.

This Compliance West medical based product is designed to meet IEC 60601-1 figure 10, IEC60601-1 figure 11, IEC 60601-2-34,2-49; EC-13, EC-53 and many others. This immunity product provides testing solutions for many standards that require 5000v with different output wave shaping. 

RENTAL

The MegaPulse Debif 5P by Compliance West Defibrillator Test set provides up to  5,000 volts to meet a variety of EMI standards.  A2LA accredited calibration is included in the EMC rental equipment price. This product includes a newly design resistor bank, inductor and capacitors allow output to be in accordance with circuit simulations.

This Immunity Test Generator is completely redesigned to allow accurate energy measurement during the testing per IEC 60601-1:2005. ith an oscilloscope connected to the energy measurement output jack on the Defib-5 rear panel, accurate energy measurements are assured by our redesigned resistor bank which not only measures 100 ohms statically when checked before each test, but remains within 5% of the nominal value while the test is being conducted, which is essential for accurate energy measurement.

This test equipment is designed to providing testing per EN IEC 60601:2005 with pass/fail box. This Compliance west product can conduct also conduct testing to a variety of standards including EN IEC 60601-2 (27,34,&49), EN IEC 60601-1:2006 Figure 11, EC-13, and EC-53. All these tests use the same 5000V source with differences in output waveshaping.

 

RENTAL

In Stock

Teseq Broad Band Amplifier Features 

      • Class A Broad Band Amplifier
      • 89Mhz-1Ghz 300 Watts Capabilites
      • Compact Design & Touch Screen Color display
      • Free Technical Support & 2 Days Free Transit
      • Easily Integrated with Teseq NSG 4070
      • Built-in Calibrated Directional Coupler
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The CBA 1G-300D has the capacity to produce a 300W 80MHz to 1GHz and can be controlled via front panel or via latop with USB, GPIB, RS232 and Ethernet connections. It is compatible and can be easily integrated with a wide variety Teseq products and test systems. The minimum of 500W linear power makes it a  excellent solution for RF immunity testing for a variety of applications including military, automotive, and aerospace applications.

This EMC test equipment is often used for RF immunity testing to IEC 61000-4-3, MIL-STD 461, ISO 11452,  RTCA DO-160, and many others. We also carry the CBA 1G-300B, which provide 300W capabilities with the same frequency range. It is often included in test setups with associated Teseq products, including the NSG 4070 and ITS 6006. The touch screen front panel gives immediate fedback and provides information including operating status and heatsink temperature.

Our amplifiers provide turnkey solutions coming with required cords and accessories. The inbuilt fan speed automatically adjusts according to the heatsink temperature ensuring the minimum audio noise level. To supplement testing, we also rent many other amplifiers including S251-300 (800MHz-2.5Ghz 300w) and AS0860-50 (800Mhz-6Ghz 50W).