IEC 60601-1-2 Rentals - Medical EMC Immunity Test Equipment 
IEC 60601-1-2 Rentals - Medical EMC Immunity Test Equipment 
EN IEC 60601-1-2 falls under the greater standard of IEC 60601 which sets safety and essential performance of medical electrical equipment. This standard is available for purchase through the IEC Webstore. EN IEC 60601-1-2 bases a large majority of EMC immunity testing off a variety of other standards with modifications. This standards also distinguishes testing criteria based upon the intended use, either in a professional or home health care environment. This standard covers a variety of different EMC events, including electrostatic discharge (ESD), electrical fast transients (EFT), surge, and many others. This is in direct comparison of many other IEC standards which focus on an individual phenomena. However, when referencing other IEC standards it is crucial to be sure that the most up to date version of EN IEC 60601-1-2 is used.

IEC 6060-1-2 EMC Event with associated standard

For testing to EN IEC 60601-1-2 we offer a diverse set of EMC test equipment to meet any testing needs. We offer rental products from EMC PartnerEM TestTeseq, and many other to meet any customer requirements or preferences. All of our EN IEC 60601-1-2 test equipment rentals comes with an A2LA accredited calibration and free technical support included in the rental equipment price. For 12V DC testing we offer two main solutions from both EM Test and Teseq allowing the most cost efficient and customization solution. We provide rentals of a wide large group of EMC test equipment allowing a single company solution to meet any testing within IEC 60601-1-2.  

IEC 60601-1-2 Rentals - Medical EMC Immunity Test Equipment


NX5 Rental - EM Test 5kV Surge & EFT Generator 16A. Coupler

The EM Test NX5 EMI test generator to 5.5kV EFT and 5kV surge with a built-in 16 amp single phase coupler. A2LA accredited calibration is included in the EMC rental equipment price. It is the most versatile tester to address transient and power fail requirements for both international and commercial standards. 

This Immunity Test Generator includes an easy-to-use color touch screen allow for efficiently changing of testing parameters. It can be operated manually from the intuitive front touch screen or remotely via its built-in Ethernet, USB or optical interface. The NX 5 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing.

This product includes many reprogrammed test routines ideal for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11 and CE Mark. This EM Test pulse generator includes internal single-phase Coupling/Decoupling Network (CDN) that can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 Amp per phase. With separate power mains supply inputs, it allows the utilization of different EUT supply voltages for maximum flexibility.


LD200N Rental - EM Test Load Dump Generator

The EM Test LD200N rental provides short-term cost efficient testing to SAE J1455, SAE J1113, FMC1278, ISO 16750,  and ISO 7637 wave forms 5 and 7. This automotive EMC testing solution has the capabilities to simulate a load dump, the sudden battery disconnection causing an over voltage impulse. A2LA accredited calibration is included in the rental. This stand alone generator includes a 60V/30A DC coupling/decoupling allowing for direct testing.

This immunity generator is an all in one system for testing high-energy pulses as required by ISO 7637. By means of a built-in clipping circuit it also generates clipped load dump pulses as per international standards as well as manufacturer requirements. The LD200N can be integrated with the UCS200N and VDS 200N for a complete automotive immunity test system, similar to the NSG 5500.  

This test equipment allows for both pre-programmed standard test and modification of individual pulses through the FreeStyle mode. It has an adjustable source impedance from, 0.5 Ω to 38 Ω in .1 Ω steps. To facilitate a turnkey solution, we include laptop with software with this rental arriving at the testing location ready for use.


UCS200N Rental - EM Test Automotive EFT Generator

The EM Test UCS200N rental unit provides fast transient and microburst testing for SAE J1113, JASO, and ISO 7637 waveforms 1,2,3a,3b. The built-in coupling network can be used and controlled by any unit of the LD200N, VDS200N and PFM200N series. A2LA accredited calibration is included in the EMC rental equipment price.

The UCS200 N is equipped to meet all international and car manufacturer specifications from around the globe. Testing parameters can be modified easily through the display or via software. This Automotive EMC Test Equipment goes beyond standard's requirements waveform parameters of the Micropulse generator can be varied in a wide range by means of the FreeStyle mode.

This Teseq Automotive EMC generator includes an innovative color touch screen with intuitive menu structure and defined keys for Start / Stop / Pause, indicated by LED bars, enables the user to program test routines quickly and accurately. The UCS 200n50 also includes built in battery switch an over current protection for added testing safety. This test system can be integrated with the LD200N and VDS200N automotive transient immunity generators for a complete immunity test system, similar to that of the NSG 5500.


Dito Rent & Buy - EM Test 16.5kV ESD Simulator

Rent the Dito by EM Test a hand-held, lightweight ESD simulator that allows for air discharge to 16.5kV and contact mode to 10kV for testing to IEC 61000-4-2. A2LA accredited calibration is included in the EMC rental equipment price. EM Test a leading manufacturer of electronic test equipment has created this product to simulate an electrostatic discharge between two different objects including the human body. 

The Dito rental comes with an 150pF/330Ω discharge network for testing to IEC 61000-4-2 and other EMC immunity testing standards. This cordless ESD simulator is powered by a rechargeable battery and has enough energy to 50,000 pulses at 16.5kV. Discharge tips and discharge networks can easily be changed without disassembling the gun; simply remove one and plug-on another tip or module

This EM Test generator comes with pre-programmed test routines allowing for user to easily test to EN IEC 61000-4-2, ANSI C63.16, and many others. The discharge modules are automatically recognized and the R/C configuration is shown in the display of the test equipment. The display is easy to manipulate and requires minimal effort to change testing parameters. The Dito rental comes with both air and contact discharge tips.

  • Rental 1 Week $295.00
  • Rental 1 Month $590.00
  • Used Purchase $7,795.00