ISO 7637 Test Equipment Rentals - Automotive EMC Test Equipment

Showing 1 to 9 of 14 products

RENTAL

In Stock

Automotive Immunity Test System Features 

      • ISO 7637-2 & OEM Standards - Single Solution
      • Laptop with Software & ISO 17025 Calibration
      • Includes - NSG 5500, PA 5840, & ACC Clamp
      • Free Technical Support & 2 Days Free Transit
      • PA 5480 (Batter Simulators) - 25A & 100A Rentals
      • Prorated Daily Rate After First Month
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq NSG 5500, PA 5840, and automotive coupling clamp (conducted immunity system) are designed for ISO 7637-2 (pulses 1-7) and a variety of manufacturer (OEM) standards. This system is a combination of three different Automotive EMI products providing a complete test system. Each one of the major components can be rented individually, comes with a laptop, and is calibrated to ISO 17025. We offer rentals, as short as a week, providing a cost effective solution for a short term testing need.

RENTAL

Automotive Load Dump Generator Features 

      • Clipped Load Dump Generator - ISO 7637: 5a, 5b &7
      • Laptop & ISO 17025 Calibration Included
      • Selectable .5-38 Ohm Impedance (.1 Ohm Steps)
      • Independent Test Generator - Single Unit Solution
      • Free Technical Support & 2 Days Free Transit
      • Built in Coupler - 60volts/30amps (DUT limit)
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The EM Test LD200N provides a effective test solution to ISO 7637-2 pulses 5 and 7, as well as many other international and manufacturer based standards/requirements. This Automotive Conducted Immunity Test Solutions simulate a load dump, the sudden battery disconnection causing an over voltage impulse. This stand alone generator includes an 60v/30a DC coupling decoupling network (CDN) for direct testing and an ISO 17025 accredited calibration, providing a ideal test solution! It is designed for use with 12, 24, or 42 volt supply systems and in conjunction with other EM Test 200 series of generators.

This immunity generator is an all in one system for testing high-energy pulses as required by ISO 7637. By means of a built-in clipping circuit it also generates clipped load dump pulses as per international standards as well as manufacturer requirements. The LD200N can be integrated with the UCS200N and VDS 200N for a complete automotive immunity test system, similar to the NSG 5500.  

This test equipment allows for both pre-programmed standard test and modification of individual pulses through the FreeStyle mode. It has an adjustable source impedance from, 0.5 Ω to 38 Ω in .1 Ω steps. To facilitate a turnkey solution, we include laptop with software with this rental arriving at the testing location ready for use.

RENTAL

In Stock

Automotive Electrical Fast Transient (EFT) Generator Features

      • Micropulse Generator Module (ISO 7637, SAE, and NISSAN)
      • Laptop & ISO 17025 Calibration Included
      • Built-in Battery Switch & Overcurrent Protection
      • Independent Test Generator - Single Unit Solution
      • Free Technical Support & 2 Days Free Transit
      • Built in Coupler Network - 80volts/200amps
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The EM Test UCS200N series of automotive conducted immunity provides fast transient and microburst testing for SAE J1113, JASO, and ISO 7637-2 waveforms 1,2,3a,3b. This series of products come in a 60 volt, 50 amp (UCS 200N50) version and a 60 volt 100amp (UCS 200N100) Version, both of which can be easily integrated into existing EM Test automotive setups.  The built-in coupling network can be used and controlled by any unit of the LD200N, VDS200N and PFM200N series and comes with an A2LA accredited calibration (ISO 17025) is included in the equipment price.

This automotive test equipment is designed to meet many international and car manufacturer specifications from around the globe. Testing parameters can be modified easily through the display or via software. This Automotive EMC Test Equipment goes beyond standard's requirements waveform parameters of the Micropulse generator can be varied in a wide range by means of the FreeStyle mode.

This Teseq Automotive EMC generator includes an innovative color touch screen with intuitive menu structure and defined keys for Start / Stop / Pause, indicated by LED bars, enables the user to program test routines quickly and accurately. The UCS 200n50 also includes built in battery switch an over current protection for added testing safety. This test system can be integrated with the LD200N and VDS200N automotive transient immunity generators for a complete immunity test system, similar to that of the NSG 5500.

RENTAL

In Stock

Automotive Electrical Fast Transient (EFT) Generator Features

      • Micropulse Generator Module (ISO 7637, SAE, and NISSAN)
      • Laptop & ISO 17025 Calibration Included
      • Built-in Battery Switch & Overcurrent Protection
      • Independent Test Generator - Single Unit Solution
      • Free Technical Support & 2 Days Free Transit
      • Built in Coupler Network - 80volts/200amps
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The UCS200N100 by EM Test is a fast transient and microburst generator for waveforms 1,2,3a,3b of SAE J1113, JASO, ISO 7637 and many others. The built-in coupling network can be used and controlled by any unit of the LD200N series, VDS200N series and PFS200N series. ISO 17025 A2LA accredited calibration is included in the EMC rental equipment price. This series of products come in a 60 volt, 50 amp (UCS 200N50) version and a 60 volt 100amp (UCS 200N100) Version, both of which can be easily integrated into existing EM Test automotive setups.  

The UCS200N 100 series is equipped to meet all international and car manufacturer specifications from around the globe. Testing parameters can be modified easily through the display or via software. This Automotive EMC Test Equipment goes beyond standard's requirements waveform parameters of the Micropulse generator can be varied in a wide range by means of the FreeStyle mode.

An innovative color touch screen with intuitive menu structure and defined keys for Start / Stop / Pause, indicated by LED bars, enables the user to program test routines quickly and accurately. This automotive generator also includes built in battery switch an over current protection for added testing safety. The UCS200N can be integrated with the LD200N and VDS200N for a complete immunity test system, similar to that of the NSG 5500.

RENTAL

EM Test Automotive Immunity System

      • ISO 7637-2 & OEM Standards - Single Solution
      • Laptop & ISO 17025 Calibration Included
      • VDS200N, LD200N, UCS200n, & CCL Combination
      • Diverse Immunity Standard Testing Capabilities
      • Free Technical Support & 2 Days Free Transit
      • Prorated Daily Rate After First Month
      • Turnkey Solution - Arrives Ready for Testing! 

Overview

The EM Test VDS200N, LD200N, UCS200N, & ACC provides a full ISO 7637 test solutions and comes with an ISO 17025 accredited calibration. This system is controlled through software through the laptop, which has the required information already installed. This system is a combination of sevearl different Automotive EMI products providing a complete test system. Each one of the major components can be rented individually, comes with a laptop, and is calibrated to ISO 17025. We offer rentals, as short as a week, providing a cost effective solution for a short term testing need. 

RENTAL

In Stock

30Amp Automotive Battery Supply Features

      • DC Power Supply Dips/Int - ISO 7637: 2b & 4
      • Laptop & ISO 17025 Calibration Included
      • 15 amp & 30 Amp modules available for delivery!
      • Independent Test Generator - Single Unit Solution
      • Free Technical Support & 2 Days Free Transit
      • Voltage up to 60V & Easily Integrated Into Setup
      • Turnkey Solution - Arrives Ready for Testing! 

Overview

The EM Test VDS200N series of automotive batter supply/voltage drop simulator provides testing capabilities for a variety of standards including ISO 7637. This series provides provides a diverse set waveforms recommended by both international and manufacturer standards. We offer rentals of both the 15amp (VDS 200N15) and 30amp (VDS 200N30) test solutions which can be used independently or integrated into an EM Test 200 series automotive immunity setup. This piece of test equipment comes with an ISO 17025 accredited calibration and a latop with software installed, providing a quick solution.

The Automotive EMC Test Equipment also allows for both pre-programmed Standard Test and modification of individual pulses. The EM Test iso.control software provides fast control of all test parameters providing and efficient and effective testing solution. This rental equipment comes will all required cords and software required to complete testing. An additional test system the VDS 200N15 with 15 amps is available for rent as well.

This automotive waveform generator can easily be integrated with the UCS200N and the LD200N automotive transient immunity generators for a complete automotive test system, similar to that of the NSG 5500. It provides current up to 200A (peak up to 1,000A) with low output impedance. This EM Test immunity generator provides unique testing capabilities and easy to use interface, making it ideal for a variety of automotive immunity testing needs.