Keytek ECAT - 8kV EFT/Burst System 3-Phase CDN Rent & Buy

Keytek ECAT EFT/Burst System:

  • 8kV EFT/Burst & 3-Phase CDN
  • ECAT E103, E421, & E4554 System
  • Verification Accessories Rental Available 
  • Current ISO 17025 Cal & 2 Days Free Transit Time

Request A Quote


Conducted Immunity Generator Features 

      • 8kV EFT/Burst & 3-Phase CDN
      • Thermo Keytek Test System
      • ECAT E103, E421, & E4554 Combination
      • Free Technical Support & 2 Days Free Transit
      • Turnkey Solution - Arrives Ready for Testing!


The ECAT E103, E421 and E4554 by Thermo Fisher Scientific / Keytek is designed to test to a variety of immunity standards requiring 8kV EFT with 3 phase AC power coupler/decoupler to 480V, 32A. This ECAT System comes with an A2LA accredited calibration and free technical support included with rental. This rental is a combination of the ECAT E103 control unit and E421 and E4554 modules.

This Thermo Fisher Scientific / Keytek EMC immunity generator provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with to be conducted efficiently without re-initializing the EUT between tests. The ECAT E421 can be rented individually or in combination with the ECAT E103. 

This ECAT system is designed to test EN/IEC 61000-4-4, and many other immunity standards that have a high voltage EFT component. TThe modular system of this Thermo Fisher / Keytek product provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. The E103 and E421, E4554 combination can be controlled via front panel or through computer using Keytek software.

Data Sheet



Controller for the ECAT system with front panel and software operation.

E421 EFT Generator



IEC 61000-4-4

Burst Voltage

250V to  8kV

Burst Voltage Resolution


Burst Frequency

Adjustable from  1kHz to 1 MHz to a full 4.4kV;1kHz to 200kHz to 8kV

Burst Duration

0.75ms to 20ms; 0.25ms  resolution

Burst Test Length

1s to 999s

Voltage Monitor

Built-in;150MHz bandwidth


16kg, 35lbs


21x42x52 cm,8x16x20 inches

Integrated CDN-E4554:


  AC Voltage and Current              

50-480 VAC, 32A, 5 lines/3 phases

  DC Voltage and Current


ECAT Series

Common Modules


ECAT Series Full Accessory
Item Capabilities
ECAT Model E411 EFT/Noise Burst simulator for testing in accordance with IEC 61000-4-4 Edition 2 to 4.4kV
ECAT Model E412 EFT/Noise Burst simulator with built-in, single phase AC mains coupler/decoupler for testing in accordance with IEC 61000-4-4 Edition 2 to 4.4kV. Model E412 features all specifications and options noted in Model E411 (above), as well as the following:
ECAT Model E421 FT/Noise™ Burst Simulator for IEC 61000-4-4 Edition 2 to 8 k
ECAT Model E501B Plug-in combination wave surge simulator to produce the combination waves required by IEC 6100-4-5, ANSI/IEEE C62.41 Cat. B and UL 1449 at 3kA
ECAT Model E502B Plug-in module to produce the telecommunications surge wave required by IEC 61000-4-5, FCC Part 68 and ITU Rec K.17, K.20, and K.21 (formerly CCITT
ECAT Model E503 Plug-in module to produce the ring waves specified by ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864
ECAT Model E504A Plug-in module to produce the combination wave required by UL 1449 (some devices must also be tested using the E501A surge module)
ECAT Model E505A Plug-in module that produces the lightning surge waveforms required by FCC Part 68
ECAT Model E506-4W Plug-in module to produce the 2/10 µs surges required by Telcordia GR-1089 CORE for up to five-wire (four terminal) testing
ECAT Model E508 and E508-12P Plug-in modules to produce the 10/360 µs surges required by Telcordia GR-1089 CORE
ECAT Model E510A Plug-in module to produce combination wave specified by ANSI/IEEE C62.41 Cat. B and IEC 61000 4-5 to 10kV and 5kA
ECAT Model E511 Plug-in module to provide combination waves to 6 kV and 5 kA, as required by British Telecom standards
ECAT Model E513 Plug-in module to produce voltage ramps for testing surge protection components such as gas tube arrestors; meets surge simulator requirements of UL 864
ECAT Model E514 Surge simulator for 10/1000 µs current waves
ECAT Model E515 Module to produce the 10/250 µs surges required by Telcordia GR-1089-CORE
ECAT Model E518 Plug-in module to produce the 10/1000µs waveforms to 2kV as required by Telcordia GR-1089-CORE for both Lightning Surge and Protection Coordination. Includes HB-ECAT
ECAT Models E521 and E522 Surge systems that produce the high voltage, high current combination waves required by ANSI standards for service entrance and outside connected electronics; meets requirements of IEC 61000-4-5 for all exposure categories. ECAT Model E521 includes built-in AC coupler/decoupler for singlephase lines to 480V, 32A; ECAT Model E522 includes built-in AC coupler/decoupler for three-phase lines to 480V, 32A/phase (actual AC mains current per AC line connector limits).
ECAT Model E551 A single-phase AC line (power lines) coupler/decoupler for surge waves, as specified by IEC 61000-4-5
ECAT Models EP61 and EP62 Plug-in modules provide swells, dips and interrupts on AC power mains in compliance with, and exceeding the requirements of IEC 61000-4-11 Edition 2. Model EP61 for single-phase AC lines to 240 RMS, 16A; Model EP62 for single-phase AC lines to 240 RMS, 32A
ECAT Model E455x Single and three-phase AC line coupler/decouplers for EFT and Surge waves, as specified by IEC 61000-4-4 Edition 2 and IEC 61000-4-5


You may also like

Recently viewed