Magnetic Field/Pulse Test Equipment Rentals

Magnetic Field Inductive Coil

In Stock

Reflective Array Antenna Features: 

      • Two Inductive coils 1 x 1m and 1 x 2,6 m
      • All three magnetic field test:50/60 Hz, SURGE and Damped Oscillation
      • Free Technical Support & 2 Days Free Transit
      • One 1000 A (50/60 Hz) Inductive coil
      • Current Transformer Mounted Direct on Inductive Coil
      • Turnkey Solution - Arrives Ready for Testing!

Overview

High power low frequency magnetic fields (16 2/3 , 50, 60 Hz) are measured near mains power, railways, trams, trolley-buses, low voltage heating oven, welding machines, induction ovens and busbars for energy distribution networks. Generally monitors, microphones and hall sensors are sensitive to magnetic fields. The IEC standard 61000-4-8 defines the 50/60Hz magnetic field test, the IEC 61000-4-9 the SURGE magnetic field test and IEC 61000-4-10 the damped oscillatory magnetic field test.

Damped Oscillatory Generator

In Stock

Damped Oscillatory Test System Features:

      • 3kV 100kHz & 1MHz Damped Waveform
      • ISO 17025 Calibration included
      • Free Technical Support & 2 Days Free Transit
      • Used with MF1000-1 for Magnetic Field Testing 
      • Waveforms - 1.2/50, 8/20 μs, 1.2/50 μs 0.5J
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The EMC Partner MIG-OS-OS1 pulse generator with the CDN 2000-6-25 allows for testing for damped oscillatory waves with frequencies of 100 kHz and 1 MHz, comparable to the NSG 3040 SW. An ISO 17025 accredited calibration comes standard with the rental. This products easy to use software allows for quick and easy testing and changing of parameters. This test solution is ideal for testing to a variety of damped oscillatory testing including ANSI C37.90, IEC 61000-4-18, IEC 60255-22-1, and many others.

4kV Immunity Pulse System

Conducted Immunity Generator Features 

      • 4.1kV Bi-wave Surge & 4.4kV EFT/Burst
      • Newest Model! TRA3000 Replacement!
      • ISO 17025 Calibration included
      • Free Technical Support & 2 Days Free Transit
      • Display information with any web browser
      • Same Platform for IEC 61000-4-16 Solution
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The EMC Partner IMU4000 EMI (Optional: Common Mode) test generator is an all in one unit testing solution for testing to EFT to 4.4kV and Surge to 4.1kV with built-in single phase coupler, and Dips under 6 amps. A2LA accredited calibration is included in the EMC rental equipment price. This products "Plug and Play" architecture allows for system to automatically identify hardware then re-configure testing menu to reflect the change.

This Immunity Test Generator has been created for CE transient testing as well as fulfilling IEC basic standard requirements. The IMU 4000 includes both an Ethernet Port for control communication and test reporting that includes laboratory environmental conditions.This EMC tester is a environmentally conscience solution with low power consumption, less noise, and less heat. 

The IMU 4000 is a single unit testing system for EN/IEC 61000-4-4, EN/IEC 61000-4-5EN/IEC 61000-4-11and CE Mark. With the common mode available for testing to EN/IEC 61000-4-16 this design offers flexibility depending on testing needs. As an added bonus EMC Partner does not require proprietary software all reports are HTML based and can be viewed with web browsers.

EMC Partner Immunity System

Conducted Immunity Generator Features 

      • 4.1kV Bi-wave Surge & 4.4kV EFT/Burst
      • Test report includes Laboratory Conditions
      • ISO 17025 Calibration included
      • Free Technical Support & 2 Days Free Transit
      • Display information with any web browser
      • Same Platform for IEC 61000-4-16 Solution
      • Turnkey Solution - Arrives Ready for Testing!

Overview

This variation (with modules) of the EMC Partner TRA3000 platform has the capabilities for combination wave surge and electrical fast transients to 4kV and includes a single phase built in coupler 300v/15a AC and 300v/10a DC. We also offer another platform with respective modules for Common Mode or Dips/Interrupts providing a solution for IEC 61000-4-16. All of our variations of these test generators come with ISO 17025 accredited calibration and technical support. 

This Immunity Test Generator has been created for CE transient testing as well as fulfilling IEC basic standard requirements. This EMC Patner pulse generator includes both an Ethernet Port for control communication and test reporting that includes laboratory environmental conditions.This products "Plug and Play" architecture allows for system to automatically identify hardware then re-configure testing menu to reflect the change.

The TRA3000 is a single unit testing system for EN/IEC 61000-4-4, EN/IEC 61000-4-5and CE Marking. With the common mode or dips/interrupts available for testing to EN/IEC 61000-4-11 and EN/IEC 61000-4-16, this design offers flexibility depending on testing needs. As an added bonus EMC Partner does not require proprietary software all reports are HTML based and can be viewed with web browsers.