NSG 437 & NSG 438 Accessories

Showing 1 to 9 of 32 products

NSG 437/438 ISO 10605 Newtork

NSG 437/438 ISO 10605 Network Package

      • ISO 10605, OEM, & Standards ESD Solution
      • INA 4381, INA 4382, & INA 4553 Combination
      • Rented/Purchased as Whole/Individually
      • 150pF/2kΩ, 330pF/2kΩ, 330pF/330Ω
      • ISO 17025 Calibration Standard for Rentals!

This is a combination package of ISO 10605 networks for the NSG 437 or the NSG 438 test systems for ESD. This package includes 3 different networks INA 4381, INA 4382, and INA 4553. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities.

Teseq & EM Test - US Distributor

Custom discharge networks for both the NSG 437 and NSG 438 electrostatic discharge simulators/guns are available upon request. These networks are designed for either the simulator and can cover a large range of testing requirements. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These networks can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities. 

Add to cart

Teseq ESD Target Set

ESD Pulse Target:

      • Target for precise ESD pulse measurements
      • Precise gold plated construction
      • ISO 17025 Calibration included
      • Free Technical Support & 2 Days Free Transit
      • Very small insertion loss variation
      • Includes target, attenuator and cable

Overview

The MD 102a, successor to the MD 103 , is a electrostatic discharge calibration target used for verifying waveforms of ESD simulators/guns. All the elements incorporated within the measurement chain must be matched to one another before highly accurate measurements with minimal uncertainties can be contemplated. This test accessory offers distortion-free, flat frequency characteristic up to at least 6 GHz. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities. 

Faster oscilloscopes enable more complete measurements and analyses of the fast ESD pulses but, of course, the rest of the components in the measurement chain must be up to the necessary standard and exhibit the appropriate frequency response. Therefore the MD 102 set offers a complete measuring path from the target to the attenuator up to the high quality coax cable. The whole path has to be left together and should not be disassembled into parts, as the whole coupling path is calibrated in one piece. The MD102 replaces the MD101 & MD103 ESD targets.

Replacement Contact Tip

In Stock

Discharge Tip Features

      • Designed for Teseq NSG 437 & NSG 438
      • Part Number - 403-827 
      • Ametek Warranty (2 Year) on Parts
      • Turns Onto the Front of Simulator

Overview

The 403-827 contact discharge tip for the NSG 437 series & NSG 438 series of simulator allows for contact discharge testing. This tip will not work with the NSG 435 or other simulators. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities. 

Add to cart

Fast Contact Discharge Tip

Discharge Tip Features

      • Designed for Teseq NSG 435 
      • Part Number - INA 4411
      • Ametek Warranty (2 Year) on Parts
      • Turns Onto the Front of Simulator

Overview

Real world ESD phenomena can involve fast discharge current rise times of up to 400ps. While these faster phenomena are mentioned in the equipment-level standards, the standards only specify rise times in the range of 700ps – 1ns. This optional tip can generate rise times of less than 400ps, allowing investigation of high frequency phenomena beyond the standards. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities. 

Add to cart

NSG437/438 MIL-STD-1576

The INA 4555 is an 500pF/500Ω for electrostatic discharge testing for MIL-STD-1576, MIL-STD-464, and STANAG 4239. This DN is designed to be used with the NSG 437 or the NSG 438 ESD simulators. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities. 

Add to cart

Electrostatic Discharge Setup

In Stock

ESD Test Table - IEC 61000-4-2:

      • GCP, HCP, VCP, & Cables w/ Resistors 
      • Can be purchased New/Used
      • For Full IEC 61000-4-2 Setup - Components Available!
      • Free Technical Support & 2 Days Free Transit
      • Some Models - Removable Legs
      • Turnkey Solution - Arrives Ready for Testing!

Overview

Renting and purchasing the electrostatic discharge test setup for EN IEC 61000-4-2 testing allows a quick and cost efficient solution for testing needs. This immunity test setup includes: vertical coupling plane (VCP), horizontal coupling plane (HCP), insulating paper/foil, all wood table with removable legs, ground coupling plane (GCP), and all required accessories for assembly. All of our testing equipment and accessories come with technical support.

This Equipment is quite large and needs to ship via freight.  Select Fedex ground (no charge), and then we will call you for a shipping account number or a separate payment for the shipping costs (approximately $250 each way).

Options:
  • Rent Full Setup - 1 Week $250.00
  • Rent Full Setup - 1 Month $390.00
  • Purchase $4,200.00

NSG437/438 MIL-STD-750

The INA 4561 is an 100pF/1.5kΩ for electrostatic discharge testing for MIL-STD-750D. This DN is designed to be used with the NSG 437 or the NSG 438 ESD simulators. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities. 

Add to cart

NSG437/438 UL 1023 Network

The INA 4584 is an 250 pf/1500 Ω discharge network for electrostatic discharge testing to UL 1023. This DN is designed to be used with the NSG 437 or the NSG 438 ESD simulators. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities. 

Add to cart

Showing 1 to 9 of 32 products