SAE J1113

Showing 1 to 9 of 16 products

RENTAL

PA 5840-75 Rental - Teseq 25 Amp Cont. Automotive EMC Battery Simulator

The PA5840 by Teseq is the DC power supply for use with the Teseq NSG 5500 automotive EMC immunity test system. A2LA accredited calibration is included in the EMC rental equipment price. This fast, reliable, and modular DC power supply comes with up to 6 kW of power. 

This Automotive EMC Test Equipment provides dips and interrupts for Automotive EMC standards including ISO 7637, waveforms 2b and 4. The PA 5840 includes two gain settings for use and output ranges for power efficiency. This DC power supply needs a control unit to be used. This Teseq product also allows for High bandwidth up to 150 kHz.

RENTAL

NSG 5500 Rental - Teseq Automotive Transient Immunity Generator System

The NSG5500 made by Teseq offers solutions for transient immunity testing based on ISO 7637 pulses 1, 2a, 3a, 3b, and the load dump pulses from ISO 16750-2.  It includes the +ARB Option for pulses 2b and 4. Our automotive EMI rental equipment includes an accredited calibration in the rental price. The automotive transient immunity generator includes a coupler/battery switch for testing requiring battery coupling.

The NSG 5500 system allows for testing to international, commercial, and company specific standards including. The Arbitrary waveform generator option supports >64,000 segments plus 1GB of Clone data with up to 10Ms/s 16 bit operation. Control of the testing parameters is done through PC running AutoStar™ software. The NSG 5500 Automotive  EMI Test Equipment allows for testing to be completed through a single output connector.

This all-in-one product comes with a laptop with software pre-installed for efficient testing. Additional inputs and outputs are located on the rear panel for test execution control purposes and monitoring. The NSG5500 is the first product to offer a completely internal 100 amp. battery switch for transient immunity testing. These automotive transient immunity generators can be used with the PA 5840-300 battery Simulator or the PA 5840-75 Battery Simulator.

  

RENTAL

LD200N Rental - EM Test Automotive EMC Immunity Load Dump Test Equipment

The EM Test LD200n Load Dump Generator allows for testing to SAE J1455, SAE J1113, ISO 7637, wave forms 5 and 7. This Immunity test product simulates the sudden battery disconnection causing an over voltage impulse. A2LA accredited calibration is included in the EMC rental equipment price. This standalone generator includes a 60 V/ 30A DC coupling/decoupling allowing for direct testing.

The Load Dump generator is an all in one system for testing high-energy pulses as required by ISO 7637. By means of a built-in clipping circuit it also generates clipped load dump pulses as per international standards as well as manufacturer requirements. The LD200N can be integrated with the UCS200N and VDS 200N  automotive transient immunity generators for a complete immunity test system, similar to the NSG 5500.  

The LD200N Automotive EMC Test Equipment also allows for both pre-programmed Standard Test and modification of individual pulses through the FreeStyle mode. It has an adjustable source impedance from, 0.5 Ω to 38 Ω in .1 Ω steps. For easy of use we include laptop with software with this rental arriving at your location ready for use.

RENTAL

UCS200N Rental - EM Test EMC Automotive EFT Generator, 50 Amp Coupler

The UCS200N 50 by EM Test is a fast transient and microburst generator for waveforms 1,2,3a,3b of SAE J1113JASOISO 7637 and many others. The built-in coupling network can be used and controlled by any unit of the LD 200N series, VDS 200N series and PFS 200N series. A2LA accredited calibration is included in the EMC rental equipment price.

The UCS200N is equipped to meet all international and car manufacturer specifications from around the globe. Testing parameters can be modified easily through the display or via software. This Automotive EMC Test Equipment goes beyond standard's requirements waveform parameters of the Micropulse generator can be varied in a wide range by means of the FreeStyle mode.

This Teseq Automotive EMC generator includes an innovative color touch screen with intuitive menu structure and defined keys for Start / Stop / Pause, indicated by LED bars, enables the user to program test routines quickly and accurately. The UCS 200n50 also includes built in battery switch an over current protection for added testing safety. The UCS00n can be integrated with the LD200n and VDS200n  automotive transient immunity generators for a complete immunity test system, similar to that of the NSG 5500.

RENTAL

VDS200n Rental - EM Test EMC Automotive Programmable DC Power Supply, 15 Amp

The EM Test VDS200n 15 power supply, and Interrupts is designed for automotive EMC standards including ISO 7637, waveforms 2b an 4. This battery supply simulator and DC voltage source provides a diverse set waveforms recommended by both international and company standards. A2LA accredited calibration is included in the EMC rental equipment price.

This waveform generator can easily be integrated with the UCS 200n and the LD 200n automotive transient immunity generators for a complete automotive test system, similar to that of the NSG 5500. It provides Current up to 200A (peak up to 1,000A) with low output impedance. The VDS 200n15 Automotive EMC Test Equipment also allows for both pre-programmed Standard Test and modification of individual pulses. 

RENTAL

ESD3000 DN2 Rental - Automotive 30kV ESD Simulator 330pf/2KΩ Network for ISO 10605

The DN-2 by EMC Partner with the ESD 3000 is a hand-held, lightweight, electrostatic discharge gun for air and contact discharge to 30kV. The DN2 Resistance Capacitance (RC) Network allows for testing with 330 pF / 2 kΩ and requires the RM32 for all testing. A2LA accredited calibration is included in the EMC rental equipment price.

EMC Partner software comes with the Automotive EMC Test Equipment rental allowing for remote control and reports to be generated. The design of the interface for the ESD3000 DN 2 offers the user a quick way to change test parameters with one hand. The ESD gun can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.

The EMC Partner test equipment can be run with AA batteries or rechargeable battery pack. Electronic polarity reversal, including alternating polarity, is provided with the ESD3000. The networks capabilities allow for testing to ISO 10605JASOSAE J1113, TR 10605 and other automotive specs to 30kV.

Options:
  • Rental 1 Week $545.00
  • Rental 1 Month $1,090.00

RENTAL

ESD3000 DN3 Rental - Automotive 30kV ESD Simulator 150pf/2KΩ Network ISO 10605

The DN3 by EMC Partner with the ESD 3000 is a hand-held, lightweight, electrostatic discharge gun for air and contact discharge to 30kV. The DN3 Resistance Capacitance (RC) Network allows for testing with 150pF/2kΩ and requires the RM32 for all testing. A2LA accredited calibration is included in the EMC rental equipment price.

EMC Partner software comes with the Automotive EMC Test Equipment rental allowing for remote control and reports to be generated. The design of the interface for the ESD3000 DN 3 offers the user a quick way to change test parameters with one hand. The ESD gun can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.

The EMC Partner test equipment can be run with AA batteries or rechargeable battery pack. Electronic polarity reversal, including alternating polarity, is provided with the ESD3000. The networks capabilities allow for testing to ISO 10605JASOSAE J1113, TR 10605 and other automotive specs to 30kV

Options:
  • Rental 1 Week $545.00
  • Rental 1 Month $1,090.00

RENTAL

ESD3000 DN6 Rental - Automotive 30kV ESD Simulator 300pf/330Ω Network ISO 10605

The DN6 by EMC Partner with the ESD 3000 is a hand-held, lightweight, electrostatic discharge gun for air and contact discharge to 30kV. The DN6 Resistance Capacitance (RC) Network allows for testing with 330pF/330Ω and requires the RM32 for all testing. A2LA accredited calibration is included in the EMC rental equipment price.

EMC Partner software comes with the Automotive EMC Test Equipment rental allowing for remote control and reports to be generated. The design of the interface for the ESD3000 DN-6 offers the user a quick way to change test parameters with one hand. The ESD gun can be easily mounted on a tripod allowing for long duration tests to be easy accomplished without user fatigue.

The EMC Partner test equipment can be run with AA batteries or rechargeable battery pack. Electronic polarity reversal, including alternating polarity, is provided with the ESD3000 DN6. The networks capabilities allow for testing to ISO 10605, JASOSAE J1113, TR 10605 and other automotive specs to 30kV

Options:
  • Rental 1 Week $545.00
  • Rental 1 Month $1,090.00

RENTAL

VDS200n30 Rental - EM Test Automotive EMC Programmable Power Supply, 30 Amp

The EM Test VDS200n30 power supply, and Interrupts is designed for automotive EMC standards including ISO 7637, waveforms 2b an 4. This battery supply simulator and DC voltage source provides a diverse set waveforms recommended by both international and company standards. A2LA accredited calibration is included in the EMC rental equipment price.

This waveform generator can easily be integrated with the UCS 200n and the LD 200n for a complete immunity test system,  similar to that of the NSG 5500. It provides Current up to 200A (peak up to 1,000A) with low output impedance. The VDS 200n30 Automotive EMC Test Equipment also allows for both pre-programmed Standard Test and modification of individual pulses. 

Showing 1 to 9 of 16 products