Com-Power LI-3P-232 - Rent 50µH 3-Phase LISN 32Amps

Com-Power 32Amp LISN:

  • 3-Phase 32Amp & 500 VAC Maximum
  • Frequency Range: 9 kHz to 30 MHz
  • CISPR 16-1-2 & ANSI C63.4 (FCC) Compliant
  • Standard 3-Phase Connector Type
  • Includes Laptop with Software Installed 

Options/Equipment


Get weekly, two week, and monthly rentals on all products

Got Questions about the equipment? Get technical support

Two FREE days transit time with every rental

Request A Quote

Associated Rental Emissions Equipment

Description

Overview

The LI-3P-2x Series consists of four separate models of four conductor, 50Ω, 50/250 μH +5Ω Line Impedance Stabilization Networks (LISNs); also known as Artificial Mains V-Networks (V-AMNs). The primary differences between the four models are their respective current ratings: LI-3P-216 16 Amps (per line, continuous) LI-3P-232 32 Amps (per line, continuous) LI-3P-263 63 Amps (per line, continuous) LI-3P-2100 100 Amps (per line, continuous)

These LISNs provide the necessary measurement platform for performing power line conducted emissions compliance testing per most worldwide commercial EMI/ EMC requirements, such as FCC (U.S.), CE (Europe), AS/NZS (Australia/New Zealand), VCCI (Japan), Industry Canada, etc. The LISNs perform the following functions: provide a defined,stable power line impedance across its frequency range for the Equipment Under Test (EUT); isolate the EUT and measurement circuitfrom the power source, thereby minimizing its influence on the measurements; and, couple the disturbance voltages to the coaxial measurement port, which connects to the measuring instrument.

The LISNs use air-core inductors to prevent saturation and permeability variation. The mounting plates are left unpainted in order to facilitate connection to earth ground in their installation, which is essential due to high leakage currents. The side panels for each LISN are louvered for cooling purposes. The LI-3P-263 and LI-3P-2100 also include two internal cooling fans operated by a switch on the rear panel

Data SheetUser Manual

Specifications

Common Standards

CISPR 16-1-2 (CE), ANSI C63.4 (FCC)

Type

50Ω, 50/250 μH +5Ω, (4) Conductor Network

Frequency Range

9 kHz to 30 MHz

Insertion Loss - 9 kHz to 150 kHz

<6.5 to <0.7 dB

Insertion Loss - 150 kHz to 30 MHz

<0.7 dB

Isolation - 9 kHz to 50 kHz

>0 to >40 dB

Isolation - 50 kHz to 30 MHz

>40 dB

Insertion Loss

< 0.5 dB (150 kHz to 30 MHz)

Isolation

> 40 dB (150 kHz to 30 MHz)

Current (maximum continuous, perline)

32 Amperes

AC Voltage (maximum

500 Voltsrms (line to line), 288 Voltsrms (line to ground)

DC Voltage (maximum)

705 Volts DC

Remote Interface PowerInputs

6 Volts DC (unregulated), 500 mA (LISN and RLI-100 Remote LISN Interface)

RF Measurement Port

50Ω - N-Type (female)

FiberOptic Ports

Avago Duplex Latching POF Jack (LISN and RLI-100 Remote LISN Interface)

You may also like

Recently viewed