Solar 6512-106R - Rent 10μF Feed-Thru Capacitor

Solar 6512-106R Feed-Thru Capacitors:

  • 10 μF Capacitors for Susceptibility Tests 
  • Maximum Current 100 Amps 
  • 275 VAC 60Hz, 250 VAC 400Hz, 600 VDC
  • Built-in Discharge Resistor for Safety

Get weekly, two week, and monthly rentals on all products

Got Questions about the equipment? Get technical support

Two FREE days transit time with every rental

Request A Quote

Description

Overview

Starting with the Solar Type 6512-106R Feed-Thru Capacitor, Solar Electronics has a series of 10 μF feed-thru capacitors which are specially designed to be used in RFI/EMI test setups such as MIL-STD-461A/462A. Many other specifications, such as RTCA DO-160G, now call for their use. In this application the capacitor provides a low RF impedance across the power source so that EMI currents produced by the equipment under test can be accurately measured with a current probe.

The feed-thru capacitor is used for added filtering in conjunction with line impedance stabilization networks. The 10 µF feed-thru capacitor can also be used as a power-line filter installed in the wall of a shielded enclosure or equipment cabinet. The capacitor provides adequate insertion loss without suffering the power current saturation limitation of conventional filters which employ toroidal inductors.

Solar feed-thru capacitors are highly reliable and ruggedly constructed units for general use in screen rooms and other environments. The metal case with four husky threaded inserts lends itself to convenient installation with minimal effort.

The threaded feed-thru stud will accommodate power current of the listed rating without heating or voltage loss. Table 2 indicates available current and voltage ratings of the various Solar 10 µF Feed-Thru Capacitors. All have low dissipation factors, high temperature ratings, high insulation resistance, doubly rated dielectric strength, and long life characteristics. To satisfy safety requirements, a bleeder resistor is included within the capacitors, which serves to discharge the capacitors when applied voltage is removed

Data Sheet

Specifications

Common Standards

MIL-STD-461 RTCA/DO-160

 Rated Current

100 Amps

 Rated Voltage

600 Volts

Capacitance

10µF

Tolerance

±10%

Dimensions

70mm x88.7mm  x 85.7mm (3.49”X3.374”X2.756”)

You may also like

Recently viewed