Effective EMC Immunity Test Equipment Solutions
Effective EMC Immunity Test Equipment Solutions
Immunity is the impact that electromagnetic energy has on the function of an electronic device. The International Electronical Commission (IEC) Electromagnetic Compatibility (EMC) testing standards are most comprehensive and widely used for EMC testing. These standards all fall under the basic publication of IEC 61000, which is general guidelines for EMC. The phenomena which these sets of standards are based off of include Combination Wave/Surge, Ring Wave, Burst/Electronic Fast Transients (EFT), and Dips and many others. We offer immunity test equipment from many major suppliers including, Teseq, EM Test, EMC Partner, and Thermo-Keytek.

EN / IEC Series
  • EN IEC 61000-4-4 Burst / Electronic Fast Transient (EFT)
  • EN IEC 61000-4-5 - Combination Wave / Surge 
  • EN IEC 61000-4-11 - Dips
  • EN IEC 61000-4-12 - Ring Wave

ANSI / IEEE Series

  • ANSI IEEE C62.41 - Surge
Surge, EFT, ringwave, & dips generators focuse on replicating phenomena caused by electromagnetic energy and analyzing the EUT for a respone. The focus of Surge, Ringwave, EFT, and Dips for this category is based on commercial standards. We also carry a large inventory of EMI test equipment rentals for many applications including Military/Avionics, Automotive, and Electrostatic Discharge (ESD). To facilitate testing we also carry a diverse group of accessories including 3 phase couplers and coupling clamps allowing us to provide additional testing solutions. The equipment we rent often has reprogrammed standards allowing for testing to be completed efficiently. All our of EMC Immunity test equipment comes with an A2LA accredited.

Common Immunity Rental Products

Surge, EFT, Ring wave, & Dips Generator Rentals - EMI Immunity

Showing 1 to 9 of 18 products

SALE/RENTAL

The ECAT E551 made by Thermo Fisher Scientific / Keytek is designed for single-phase AC line coupling/decoupling for surge wave modules. The E551 plug-in module requires the ECAT E103 control unit and an AC mains surge generator module. This Thermo Fisher / Keytek product is designed for testing to EN IEC 61000-4-5, ANSI/IEEE C62.41, UL 1449.

This Thermo Fisher Scientific / Keytek product provides monitoring and peak detection of surge voltage across any two manually-selected lines. Monitoring can be at the EUT or at the front panel of the coupler/decoupler. This product can be controlled via the front panel or with Keytek software via computer.

The modular system of the ECAT E551 has the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. This unit can be purchased with an ECAT E103 and AC mains surge generator for an entire EMC immunity setup. This cost effective solution is in excellent working conduction and software can be acquired with purchase.

Add to cart

RENTAL

The EMC Pro Plus made by Thermo Fisher Scientific is a 6 kv Generator for EFT to 4.4kV, Surge to 6kV, 100 kHz Ringwave to 6kV, Dips and Interrupts with a built-in single phase coupler. All of our EMC Immunity generators come with an A2LA calibration & technical support. Additional test capabilities such as the 10x700 Telecom Wave is available on request.

This EMI Immunity Generator is an easy to use, cost effective solution to a diverse set of testing needs. This system provides easy to use front panel display and can be controlled via computer through windows based software. It also monitors output of the coupling unit and automatically switches connections according to coupling mode.

The EMC Pro Plus is designed to test for a variety of EMC immunity industry standards including EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11, EN/IEC 61000-4-12, CEMark, and ANSI IEEE C62.41 cat. B. The EMC Pro Plus rental equipment It also can also be configured for custom test protocols to meet specific test requirements using the software and a full line of options and accessories.

RENTAL

This Capacitive coupling clamp by Thermo-Keytek is designed for EFT pulses on I/O lines per EN/IEC 61000-4-4

RENTAL

The CM 3CDSrg from Thermo Keytek is a three phase external coupler for EN IEC 61000-4-5 surge tests for the EMC ProPlus.

RENTAL

Thermo Keytek I/O and data line coupler for surges per EN IEC 61000-4-5.

SALE/RENTAL

The ECAT E103, E411, E501B, E503 and E4554 by Thermo Fisher Scientific / Keytek are designed to test to a variety of immunity standards requiring three phase surge, EFT, & ringwave. This Thermo Fisher Scientific EMI immunity test equipment comes with an A2LA accredited calibration and free technical support included with rental. This rental is a combination of the ECAT E103 control unit and E411, E501B, E503 and E4554 modules.

This Thermo Fisher Scientific / Keytek EMC immunity generator provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with to be conducted efficiently without re-initializing the EUT between tests. The ECAT E411, E501B, and E503, can be rented individually or in combination with the ECAT E103. 

This ECAT system is designed to test EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-12, ANSI/IEEE C62.41, ANSI/IEEE C62.45 and many other EMC standards. The modular system of this Thermo Fisher / Keytek product is upgraded to meet the latest requirements of the IEC standards. The E103 and E411, E501B, E503, E4554 combination can be controlled via front panel or through computer using Keytek software.  

Add to cart

SALE/RENTAL

The ECAT E103, E421 and E4554 by Thermo Fisher Scientific / Keytek is designed to test to a variety of immunity standards requiring 8kV EFT with 3 phase AC power coupler/decoupler to 480V, 32A. This ECAT System comes with an A2LA accredited calibration and free technical support included with rental. This rental is a combination of the ECAT E103 control unit and E421 and E4554 modules.

This Thermo Fisher Scientific / Keytek EMC immunity generator provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with to be conducted efficiently without re-initializing the EUT between tests. The ECAT E421 can be rented individually or in combination with the ECAT E103. 

This ECAT system is designed to test EN/IEC 61000-4-4, and many other immunity standards that have a high voltage EFT component. TThe modular system of this Thermo Fisher / Keytek product provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. The E103 and E421, E4554 combination can be controlled via front panel or through computer using Keytek software.

Add to cart

SALE/RENTAL

The ECAT E103, E501, and E4554 by Thermo Fisher Scientific / Keytek is designed to test to many EMC immunity standards requiring 6kV surge/combination wave with 3 phase power coupler/decoupler 480v, 32a EUT. This ECAT System comes with an A2LA accredited calibration and free technical support included with rental. This rental is a combination of the ECAT E103 control unit and E501, and E4554 modules.

This Thermo Fisher Scientific / Keytek EMC immunity generator provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with to be conducted efficiently without re-initializing the EUT between tests. The ECAT E501 can be rented individually or in combination with the ECAT E103. 

This ECAT system is designed to test EN/IEC 61000-4-5 ed.3, ANSI/IEEE C62.41, and UL 1449 and many other immunity standards that have a high voltage surge component. The modular system of this Thermo Fisher / Keytek product provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. The E103 and E501, E4554 combination can be controlled via front panel or through computer using Keytek software.

Add to cart

RENTAL

The ECAT E103, E502 by Thermo Fisher/Keytek is designed to test to Telecommunications EMC standards requiring 6kV surge of 10x700µs or 9x720µs. This ECAT System comes with an A2LA accredited calibration and free technical support included with rental. This rental is a combination of the ECAT E103 control unit and E502 B modules.

This Thermo Fisher Scientific / Keytek EMC immunity generator provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with to be conducted efficiently without re-initializing the EUT between tests. The ECAT E502 B can be rented individually or in combination with the ECAT E103. 

This ECAT system is designed to test EN/IEC 61000-4-5 ed.3, FCC part 68, ITU k.17,ITU-T k.20, ITU-T k.21 and many other immunity standards that have a high voltage telecom surge component. The modular system of this Thermo Fisher / Keytek product provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. The E103 and E502 B combination can be controlled via front panel or through computer using Keytek software. 

Showing 1 to 9 of 18 products