Thermo Keytek Rental Accessories

Keytek EFT CCL

In Stock

Coupling Clamp (CCL) Features 

      • Thermo Keytek Design Includes Cords
      • ISO 17025 Calibration & 2 Days Free Transit
      • Compliant IEC 61000-4-4 Ed.2 & Ed.3
      • Can Work With Many Immunity Generators!
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The capacitive coupling clamp by Thermo-Keytek is designed for EFT pulses on I/O lines or data lines per EN/IEC 61000-4-4. This equipment is fully compliant with the specifications of IEC 61000-4-4 Ed 2.0 2004, as well as with the draft of EN/IEC 61000-4-4 Ed 3.0 published in 2012. These testing accessories have the capabilities to work with a variety of conducted immunity generators from many manufacturers, making it an ideal solution. 

6kV High Voltage Probes

In Stock

6kV HV Probe Features

      • 6kV High Voltage Probes - Ideal for EMI
      • 200:1 Attenuation; Low EMI sensitivity
      • BNC Connection to Oscilloscope
      • Convenient to use & Self Interlock system 
      • Arrives Ready for Testing!

Overview

The differential oscilloscope probes normally used for monitoring high voltage surges and transients are generally large and cumbersome (because they are designed for use to 40 kV), unduly sensitive to noise, and difficult to maintain in close compensation adjustment. KeyTek'sModel PK 1001Dis a relatively small, lightweight probe designed to provide accurate transmission of peak surge waves to 6 kV,with fronts from 10 ns to 1.2.

Its relatively low input impedance provides low sensitivity to noise. Quick and convenient to use, the Model PK 1001 requires no ground at the probe tip, and no compensation adjustments. An auxiliary interlock unit ensures a high degree of operator safety during probe use.

10kV High Voltage Probes

In Stock

10kV HV Probe Features

      • 10kV High Voltage Probes - Ideal for EMI
      • 200:1 Attenuation; Low EMI sensitivity
      • BNC Connection to Oscilloscope
      • Convenient to use & Self Interlock system 
      • Arrives Ready for Testing!

Overview

The differential oscilloscope probes normally used for monitoring high voltage surges and transients are generally large and cumbersome (because they are designed for use to 40 kV), unduly sensitive to noise, and difficult to maintain in close compensation adjustment. KeyTek'sModel PK 1001Dis a relatively small, lightweight probe designed to provide accurate transmission of peak surge waves to 6 kV,with fronts from 10 ns to 1.2.

Its relatively low input impedance provides low sensitivity to noise. Quick and convenient to use, the Model PK 1001 requires no ground at the probe tip, and no compensation adjustments. An auxiliary interlock unit ensures a high degree of operator safety during probe use.

EMCPro Surge Board

Rent the 10x700µs Telecom Surge Board to 6kV.

EMCPro I/O & Data Line CDN

Thermo Keytek I/O and data line coupler for surges per EN IEC 61000-4-5.

EMC Pro 3-Phase Surge CDN

The CM 3CDSrg from Thermo Keytek is a three phase external coupler for EN IEC 61000-4-5 surge tests for the EMC ProPlus.