EM Test CCL - Rent Capacitve Clamp EFT/Burst Testing

Capcitive Coupling Clamp

EM Test CCL - Rent Capacitve Clamp EFT/Burst Testing

Ametek Coupling Clamp

      • Construction as per IEC 61000-4-4 Ed.3
      • EFT/Burst testing of signal- and datalines
      • Permissible burst voltage 7 kV
      • Can Work With Many Immunity Generators!
      • For cable diameter up to 40 mm

 

Overview

The EM test CCI capacitive coupling clamp is an ideal solution for testing electrical fast transients/burst onto data lines. This accessory is designed for use with the EM Test series of generators including the UCS 200N and NX series. The clamp, however can also be used with a variety of generators depending upon the type of connection that is required. The IEC 61000-4-4 Ed 3.0 published 2012 recomends the calibration of the capacitive coupling clamp into a 50ohm coaxial load with the normative calibration kit CCI PVKIT 1.

The coupling of the Electrical Fast Transients EFT/burst to signal lines can usually not be achieved by discrete capacitive coupling without interfering with the signal flow The interference simulator can be connected on both sides of the coupling clamp.

Ametek Coupling Clamp

      • Construction as per IEC 61000-4-4 Ed.3
      • EFT/Burst testing of signal- and datalines
      • Permissible burst voltage 7 kV
      • Can Work With Many Immunity Generators!
      • For cable diameter up to 40 mm

 

Overview

The EM test CCI capacitive coupling clamp is an ideal solution for testing electrical fast transients/burst onto data lines. This accessory is designed for use with the EM Test series of generators including the UCS 200N and NX series. The clamp, however can also be used with a variety of generators depending upon the type of connection that is required. The IEC 61000-4-4 Ed 3.0 published 2012 recomends the calibration of the capacitive coupling clamp into a 50ohm coaxial load with the normative calibration kit CCI PVKIT 1.

The coupling of the Electrical Fast Transients EFT/burst to signal lines can usually not be achieved by discrete capacitive coupling without interfering with the signal flow The interference simulator can be connected on both sides of the coupling clamp.

Data Sheet

Common Standards

EN/IEC 61000-4-4

Max. permissible burst voltage

7 kV

Dimension Coupling plate

140 mm x 1000 mm

Height

GND - Coupling plate, 100 mm

Connector

High voltage connector, coaxial

GND connection

4 mm plug, banana

EUT cable

up to 40 mm diameter

Weight

10.6 kg