
ECAT E510 Rental - 10kV Combination Wave Module
- 10 kV Combination Wave Surge Module
- IEC 61000-4-5 & ANSI C62.41 Compliant
- Must be Used with ECAT E103 Controller
In Stock

Keytek ECAT E103, E513 - Voltage Ramp Tester per UL864, UL294
- Linear Voltage Ramp Module to 3kV
- ECAT E103 & E513 Test System
- Compliant UL864 & UL294 Surges
In Stock
Keytek ECAT E509A - Bellcore GR-1089-CORE 10/1000us Network
- 1.5kV 10/1000us Pulse Generator Module
- Compliant Test Solution GR-1089-CORE
Buy Used-$6,000
In Stock


Thermo Keytek CCL - Capacitive Coupling Clamp Rental
- Designed for EFT Testing Data I/O Lines
- Includes Plastic Safety Cover
- Used with the EMC Pro Plus Generator


Thermo Keytek ECAT E103 - Rent ECAT Control Center
- Required to use ECAT Modules
- Firmware Updates Provided Upon Request
- Additional Sections can be Added
In Stock


Thermo Keytek ECAT E411 - Buy & Rent 4.4 kV EFT/Burst Module
- 4.4 kV EFT/Burst Generator Module
- Designed for IEC 61000-4-4 Testing
- Must be used with E103 Control Unit
Buy Used-$4,000
In Stock


Thermo Keytek ECAT E502B - 10 x 700 µs Telecom Surge Module
- 10x700µs and 9x720µs Waveforms
- Built-in Pulse Monitor
- Must be used with E103 Control Unit
In Stock


Thermo Keytek ECAT E506-4W - Rent Bellcore 2x10 µs Surge Module
- 2 x 10 µs Waveform Generator
- Provides up to 5kV 500 Amps
- Must be used with E103 Control Unit
$4,000
In Stock


Thermo Keytek ECAT E508 - Rent 10 x 360 µs Telecom Surge Module
- 10x360µs Waveform Generator
- Provides 50 Volts to 1100 Volt Levels
- Test Solution GR-1089-CORE
Buy Used-$5,000
In Stock


Thermo Keytek ECAT E513 - Rent Voltage Ramp Generator UL864 & UL294
- Linear Voltage Ramp Generator to 3 kV
- Compliant to UL 864 & UL 294
- Must be Used with ECAT E103 Controller
In Stock


Thermo Keytek ECAT EP62 - Rent & Buy IEC 61000-4-11 Module
- Maximum 240 Volt & 32 Amps
- Designed for IEC 61000-4-11 Testing
- Must be used with E103 Control Unit
$8,000
In Stock


Thermo KeyTek MiniZap - Rent Thermo Scientific Mz-15 Simulator
- 15 kV Air Discharge & 8 kV Contact Discharge (10V Steps)
- Rugged, Portable, and Self Contained ESD Simulator
- Meets Requirements of IEC 61000-4-2 & ANSI C63.16


Thermo Keytek PK1001D - Rent 6 kV High Voltage Probe
- Low EMI Sensitivity
- 200:1 Attenuation
- Can be used with Most Oscilloscopes
In Stock


Thermo KeyTek PK1002D - Rent 10 kV HV Differential Probes
- Low EMI Sensitivity
- 200:1 Attenuation
- Can be used with Most Oscilloscopes
In Stock


ThermoScientific EMCPro Plus - Rent 6 kV Transient Test System
- 6 kV Surge, 4.4 kV EFT, & 6 kV 100 kHz Ringwave
- Built-in CDN Max 250 V/16 A AC or 100 V/10 A DC
- Capabilities for Voltage Dips Testing