CWS 500N 1.4 Rental - EM Test RF Immunity Test System

Continuous Wave Simulator 80W

CWS 500N 1.4 Rental - EM Test RF Immunity Test System

Availability: In Stock - Order by 3PM Ships Today!

Conducted & Radiated RF Immunity Test Setup Features

      • Conducted RF Solution - IEC 61000-4-6
      • Laptop & ISO 17025 Calibration Included
      • Integrated signal generator 9 kHz - 1 GHz
      • Pulse Modulation 1Hz-1KHz (10% to 90%)
      • Free Technical Support & 2 Days Free Transit
      • Variety of accessories, CDNs, & Coupling Clamps
      • Turnkey Solution - Arrives Ready for Testing!

Overview

Rent the CWS 500 N1.4 by the most common of the CWS 500N series by EM Test designed to provide testing solutions to IEC 61000-4-6 with a 9kHz-1Ghz built in signal generator. We rent a variety of accessories and test equipment associated with this series of RF immunity including the CWS 500N2  and many testing accessories. All of our RF immunity generators come with ISO 17025 accredited calibration and technical support. 

The CWS 500N 1.4 was created to test to EN/IEC 61000-4-6IEC 60601-1-2ISO 11452-4, and many others. This test system has a diverse range of applications for testing to the 1kHz 80% Am singal as well as a 2Hz 80% AM signal to test medical appliances. This unique single box solution provides software allowing for many reprogrammed standards to be run efficiently. 

The EM Test CWS 500n1 is also equipped with a 1 GHz current monitor the can be used up to 1 GHz by means of an external amplifier. As an added bonus the CWS 500n1 provides a 1Hz PM signal with 50% duty cycle required for test safety equipment. A diverse set of accessories are available for rent with the CWS 500N1 meeting any testing needs.

$700.00

CWS 500N - Rental RF Test Accessories

Conducted & Radiated RF Immunity Test Setup Features

      • Conducted RF Solution - IEC 61000-4-6
      • Laptop & ISO 17025 Calibration Included
      • Integrated signal generator 9 kHz - 1 GHz
      • Pulse Modulation 1Hz-1KHz (10% to 90%)
      • Free Technical Support & 2 Days Free Transit
      • Variety of accessories, CDNs, & Coupling Clamps
      • Turnkey Solution - Arrives Ready for Testing!

Overview

Rent the CWS 500 N1.4 by the most common of the CWS 500N series by EM Test designed to provide testing solutions to IEC 61000-4-6 with a 9kHz-1Ghz built in signal generator. We rent a variety of accessories and test equipment associated with this series of RF immunity including the CWS 500N2  and many testing accessories. All of our RF immunity generators come with ISO 17025 accredited calibration and technical support. 

The CWS 500N 1.4 was created to test to EN/IEC 61000-4-6IEC 60601-1-2ISO 11452-4, and many others. This test system has a diverse range of applications for testing to the 1kHz 80% Am singal as well as a 2Hz 80% AM signal to test medical appliances. This unique single box solution provides software allowing for many reprogrammed standards to be run efficiently. 

The EM Test CWS 500n1 is also equipped with a 1 GHz current monitor the can be used up to 1 GHz by means of an external amplifier. As an added bonus the CWS 500n1 provides a 1Hz PM signal with 50% duty cycle required for test safety equipment. A diverse set of accessories are available for rent with the CWS 500N1 meeting any testing needs.

Data Sheet

Common Standards

EN/IEC 61000-4-6, IEC 60601-1-2, ISO 11452-4

Test Level

 

 Output Voltage Level

1V – 30V

 Output Power

80W (nominal)

 Output Impedance

50 Ω

 Harmonic Distortion

Less than -20dBc at max. power


Test Frequencies

 

 Sinus (CW)

100kHz to 300MHz

 Frequency Bands

100kHz to 9.999MHz

10MHz to 99.99Mhz

100Mhz to 300MHz

 Unmodulated Signal

CW (continuous wave)

 Amplitude Modulation

1kHz, 80%AM as per IEC 61000-4-6

2H, 80%AM as per IEC 60601-1-2

400Hz, 80% AM

 Pulse Modulation

1 Hz, 50% duty cycle (EN 50130-4)

Measurements

 

 Monitor

Integrated RF power meter, measuring input for CDN and clamp calibration as well as current monitor for clamp applications

 Cal data F1-F5

5 internal memories to save calibration data

Time Parameters

 

 Dwell Time for CW & AM

td = 0.3s to 9,999s

 Dwell Time for PM

td = 3s to 9,999s

 Pause Time

tr = 0/0.3s to 9,999s

RF Output

Direct RF output, N Connector(on front panel)

Test Routines

 

 User Test Routines

Voltage sweep, Frequency sweep, Dwell time sweep

 Standard Test Routines

IEC 610000-4-6 , level 1 to level 3,Automatic Level X and Y

Signal Generator

 

 Output level

-63.5dBm to 0dBm

 Frequency Range

9kHz to 1GHz

 Output Impedance

50 ohm

 Direct RF Output

To control an external amplifier

Weight

17 kg, 37 pounds

Dimensions

44x48x14 cm,17x19x6  inches

 

Included with Rental of Conducted RF Test System

Below you will find a list of common accessories that you can expect to be delivered with the equipment. This is a generic standard list and should you require an exact connector or accessory please contact us prior to order shipping. We are also excited to offer many different testing accessories not standard with the immunity generator. This does not include any coupler/decoupler items or accessories. A detailed list of these can be found on the "All Accessories" tab. 

 

CWS 500N1.4 (C) Test Accessories 

  • Immunity Generator
  • Power Cable
  • ATT6/75
  • Printed Manual
  • Calibration Documentation
  • Software on USB Drive
  • 20db Attenuator 
  • N Male to BNC Adapter 
  • N Male to N Male U Shaped Short Circuit 
  • SMA to SMA short Circuit (Attached)
  • U Shaped Black Jumper (Attached)
  • .5m BNC to BNC 
  • 1m BNC to BNC
  • USB Cable
  • 50 Ohm Load
  • Pelican Case

Widely Used Standards

 

This list is a more comprehensive list of all the standards covered with this conducted RF Generator. For assured compliance to a particular standard, confirm prior to rental. This conducted immunity generator has the ability to either cover all, or part of the standards below.

 

  • BMW GS 95002 (2001)
  • DaimlerChrysler DC-10614
  • DaimlerChrysler DC-11224
  • EN 300329
  • EN 300340
  • EN 300342-1
  • EN 300386 V1.3.2
  • EN 301489-1
  • EN 301489-17
  • EN 301489-24 
  • EN 301489-7 
  • EN 55024 
  • EN 61000-6-1
  • EN 61000-6-2
  • Fiat 9.90110 
  • Ford ES-XW7T-1A278-AB 
  • Ford ES-XW7T-1A278-AC
  • GMW 3097 (2006)
  • IEC 60601-1-2
  • IEC 61000-4-6 
  • IEC 61326
  • IEC 61850-3
  • ISO 11452-4
  • Mercedes MBN 10284-2

Rent a variety of Conducted RF Immunity accessories with test solution.

Take advantage of A2LA ISO 17025 calibrations and fast deliveries!

 

Conducted RF Probes, Clamps, & Devices
Item Capabilities
EM101 EM Clamp .15 to 1,000 MHz, 100 W max, incl: FTC 101 decoupling clamp
F120-9A Clamp-on injection probe, 10kHz to 230MHz, 125 CW, calibration fixture
CDN-AF4 100v, 1.5amp. coupler for 4 unshielded lines
CDN-S15 100V, 1.5 amp. CDN for 15 shielded lines
CDN-M2/3/16A 240VAC, 16A coupler for 2 or 3 power lines
CDN-M5/32A

400VAC, 32A coupler for 5 power lines

Additional Available through Manufacturer

MD 4070A Monitoring Device 4kHz - 400MHz
SW 4070, SW 4070-MAN RF Switch NSG 4070 up to 2GHz
ATN Series 6 dB Attenuators

 

Other Conducted RF Immunity Accessories
Item Capabilities
ATT6/75 6dB attenuator, 75W
ATT20/0.5 20db attenuator, 0.5W for the calibration of CDNs and clamps (included with the PM 1000)
CDNs As per IEC 61000-4-6 (refer to separate list)
Clamps 50ohm termination resistor for CDNs and clamps
T-50 240VAC, 16A coupler for 2 or 3 power lines
R-100x

150ohm-to-50ohm matching impedance for calibration

Cal adapters

For all types of CDNs and clamps

icd.control Extensive and most versatile remote control and reporting software. A standard library helps to configure the test setup. Multiple interruption functions automated by IEEE instruments or manually. Easy to use or expandable to complex test routines on the base of vector definitions.
SW 4070, SW 4070-MAN RF Switch NSG 4070 up to 2GHz
ATN Series 6 dB Attenuators

I would recommend Transient Specialists. Transient Specialists always provides quality products within the established timeframes. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.

Scott D., TUV SUD Canada

 

Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!

John H., Gates Air, Inc.

 

Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.  

Adam P., Clark Testing

 

Working for a testing company I deal with renting equipment all the time.  Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.

Richard T., National Technical Systems