ECAT E513 Rental - Voltage Ramp UL864 & UL294

Availability:
In Stock - Order By 3PM Ships Today!

Keytek ECAT Voltage Ramp Module:

  • Linear Voltage Ramp Generator to 3kV
  • UL 864 & UL 294 Surge Pulse Generator
  • Must be Used with ECAT E103 Controller
  • Firmware Updates Provided Upon Request
  • Current ISO 17025 Cal & 2 Days Free Transit Time

Get weekly, two week, and monthly rentals on all products

Got Questions about the equipment? Get technical support

Two FREE days transit time with every rental

Request A Quote

Keytek ECAT - Test Accessories

Description

Voltage Ramp Immunity Module Features: 

      • Linear Voltage Ramp Generator to 3kV
      • ISO 17025 Calibration Included
      • UL 864 & UL 294 Surge Generator
      • Can Be Rented w/without E103 System
      • Free Technical Support & 2 Days Free Transit
      • Must be Used with ECAT E103 Controller

Overview

The ECAT E513 by Thermo Fisher Scientific / Keytek is designed as a voltage ramp generator for testing to a variety of Underwriter Laboratories (UL) standards. This product, does not come with E103 or CDN, which can also be rented for a complete system. This system comes standard with an ISO 17025 accredited calibration and technical support. This system can be controlled via front panel or though the Keytek Software which is provided with the rental upon request.

This Thermo Fisher Scientific / Keytek EMC immunity generator provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with the E513 be conducted efficiently without re-initializing the EUT between tests. 

This ECAT module is designed to test UL 864, UL 294, and many other EMC standards. The modular system of this Thermo Fisher / Keytek product provides the ability to be upgraded providing the ability to upgrade test capabilities to meet the newest standard. The E103 and E513 combination can be controlled via front panel or through computer using Keytek software. 

Data Sheet

Specifications

E513 Voltage Ramp Module for ECATS

 

Standards

UL 864, UL 294

Open Circuit Voltage Ramps

0.1kV/µs,0.5kV/µs,1.0kV/µs,5.0kV/µs,10kV/µs0.1kV/µs is linear to 2.5kV;all other ramps are linear to 3.0kV.

Voltage Durations

65µs for 0.1kV/µs

40µs for 0.5 kV/µs and 1kV/µs

5µs for 5kV/µsand 10kV/µs


Current Duration

45 µs at 0.1kV/µs

40µs at 0.5kV/µs and 1.0kV/µs

4µs at 5kV/µs and 10kV/µs

Open-Circuit Voltage

0-3000V ±5% in 1 volt steps

Short-Circuit Current

50A ±10% when the peak open-circuit voltage is set to 3.0kV

Weight

53kg (24lbs)

Dimensions

21 X 52 X 21cm (8  ¼ X 20 3/8 X 8 ¼)

ECAT Series

Common Modules

 

ECAT Series Full Accessory
Item Capabilities
ECAT Model E411 EFT/Noise Burst simulator for testing in accordance with IEC 61000-4-4 Edition 2 to 4.4kV
ECAT Model E412 EFT/Noise Burst simulator with built-in, single phase AC mains coupler/decoupler for testing in accordance with IEC 61000-4-4 Edition 2 to 4.4kV. Model E412 features all specifications and options noted in Model E411 (above), as well as the following:
ECAT Model E421 FT/Noise™ Burst Simulator for IEC 61000-4-4 Edition 2 to 8 k
ECAT Model E501B Plug-in combination wave surge simulator to produce the combination waves required by IEC 6100-4-5, ANSI/IEEE C62.41 Cat. B and UL 1449 at 3kA
ECAT Model E502B Plug-in module to produce the telecommunications surge wave required by IEC 61000-4-5, FCC Part 68 and ITU Rec K.17, K.20, and K.21 (formerly CCITT
ECAT Model E503 Plug-in module to produce the ring waves specified by ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864
ECAT Model E504A Plug-in module to produce the combination wave required by UL 1449 (some devices must also be tested using the E501A surge module)
ECAT Model E505A Plug-in module that produces the lightning surge waveforms required by FCC Part 68
ECAT Model E506-4W Plug-in module to produce the 2/10 µs surges required by Telcordia GR-1089 CORE for up to five-wire (four terminal) testing
ECAT Model E508 and E508-12P Plug-in modules to produce the 10/360 µs surges required by Telcordia GR-1089 CORE
ECAT Model E510A Plug-in module to produce combination wave specified by ANSI/IEEE C62.41 Cat. B and IEC 61000 4-5 to 10kV and 5kA
ECAT Model E511 Plug-in module to provide combination waves to 6 kV and 5 kA, as required by British Telecom standards
ECAT Model E513 Plug-in module to produce voltage ramps for testing surge protection components such as gas tube arrestors; meets surge simulator requirements of UL 864
ECAT Model E514 Surge simulator for 10/1000 µs current waves
ECAT Model E515 Module to produce the 10/250 µs surges required by Telcordia GR-1089-CORE
ECAT Model E518 Plug-in module to produce the 10/1000µs waveforms to 2kV as required by Telcordia GR-1089-CORE for both Lightning Surge and Protection Coordination. Includes HB-ECAT
ECAT Models E521 and E522 Surge systems that produce the high voltage, high current combination waves required by ANSI standards for service entrance and outside connected electronics; meets requirements of IEC 61000-4-5 for all exposure categories. ECAT Model E521 includes built-in AC coupler/decoupler for singlephase lines to 480V, 32A; ECAT Model E522 includes built-in AC coupler/decoupler for three-phase lines to 480V, 32A/phase (actual AC mains current per AC line connector limits).
ECAT Model E551 A single-phase AC line (power lines) coupler/decoupler for surge waves, as specified by IEC 61000-4-5
ECAT Models EP61 and EP62 Plug-in modules provide swells, dips and interrupts on AC power mains in compliance with, and exceeding the requirements of IEC 61000-4-11 Edition 2. Model EP61 for single-phase AC lines to 240 RMS, 16A; Model EP62 for single-phase AC lines to 240 RMS, 32A
ECAT Model E455x Single and three-phase AC line coupler/decouplers for EFT and Surge waves, as specified by IEC 61000-4-4 Edition 2 and IEC 61000-4-5

  

You may also like

Recently viewed