Three Phase Surge, EFT, & Ringwave ECAT System Rent & Buy Used - Thermo Fisher/Keytek

SALE/RENTAL

Three Phase Surge, EFT, & Ringwave ECAT System Rent & Buy Used - Thermo Fisher/Keytek

Availability: In Stock

The ECAT E103, E411, E501B, E503 and E4554 by Thermo Fisher Scientific / Keytek are designed to test to a variety of immunity standards requiring three phase surge, EFT, & ringwave. This Thermo Fisher Scientific EMI immunity test equipment comes with an A2LA accredited calibration and free technical support included with rental. This rental is a combination of the ECAT E103 control unit and E411, E501B, E503 and E4554 modules.

This Thermo Fisher Scientific / Keytek EMC immunity generator provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with to be conducted efficiently without re-initializing the EUT between tests. The ECAT E411, E501B, and E503, can be rented individually or in combination with the ECAT E103. 

This ECAT system is designed to test EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-12, ANSI/IEEE C62.41, ANSI/IEEE C62.45 and many other EMC standards. The modular system of this Thermo Fisher / Keytek product is upgraded to meet the latest requirements of the IEC standards. The E103 and E411, E501B, E503, E4554 combination can be controlled via front panel or through computer using Keytek software.  



$35,100.00
Request Quote

The ECAT E103, E411, E501B, E503 and E4554 by Thermo Fisher Scientific / Keytek are designed to test to a variety of immunity standards requiring three phase surge, EFT, & ringwave. This Thermo Fisher Scientific EMI immunity test equipment comes with an A2LA accredited calibration and free technical support included with rental. This rental is a combination of the ECAT E103 control unit and E411, E501B, E503 and E4554 modules.

This Thermo Fisher Scientific / Keytek EMC immunity generator provides single port testing and allows changing tests modes without switching off power to the equipment under test (EUT). This helps testing with to be conducted efficiently without re-initializing the EUT between tests. The ECAT E411, E501B, and E503, can be rented individually or in combination with the ECAT E103. 

This ECAT system is designed to test EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-12, ANSI/IEEE C62.41, ANSI/IEEE C62.45 and many other EMC standards. The modular system of this Thermo Fisher / Keytek product is upgraded to meet the latest requirements of the IEC standards. The E103 and E411, E501B, E503, E4554 combination can be controlled via front panel or through computer using Keytek software.  

Controller-E103

Controller for the ECAT system with front panel and software operation.

EFT Burst 5/50ns – E411:

 

  Standards

IEC 61000-4-4, ed.3

  Voltage Waveform into 50Ω load

5ns Rise Time±1.5ns,  50µs pulse width ±15ns

  Voltage Waveform into 1000Ω load

5ns Rise Time ±1.5ns,  50µs pulse width±15ns

  Voltage Amplitude

± 100V – 2.2kV into 50Ω, +/-200-4.4kV into 1000Ω

  Burst Duration

1.0 ms to 20ms; 1.0ms resolution

  Burst Period

300ms to 5s; 1ms resolution

  Frequency

1 kHz to 1 Mhz

Combination Wave Surge-E501B:

 

  Standards

IEC 61000-4-5 ed. 3, EN 61000-4-5, ANSI/IEEE C62.41.2 Cat. B, UL 1449 at 3kA

  Open Circuit Voltage Waveform

1.2µs, Front Time ± 30%, 50µs Duration ±20%

  Short Circuit Current Waveform

8µs Front Time ±20%, 20µs Duration ±20%

  Peak Open Circuit Voltage

250V–6kV ± 10% @2 Ω,  250-6kV ±10% @12 Ω

  Peak Short Circuit Current

125A–3kA ±10%@2 Ω, 20.8-500A ±10%@12Ω

  Pulse Repetition Rate

2 pulses/min. @6kV

100 kHz Ringwave-E503:

 

  Standards

ANSI/IEEE C62.41.2 Cat. A& B, UL 864

  Open Circuit Voltage Waveform

100kHz Damped Cosine, Rise Time=.5µs±30%,

Damping= 40%/peak

  Peak Open Circuit Voltage

200V–6.6kV ± 10% @12 Ω or @ 30 Ω, Front Time0.5µs ±30%

  Peak Short Circuit Current

200A +/-10%@30 Ωohms,500A±10%@12 Ω

  Pulse Repetition Rate

6 pulses/min.

  Line Sink Accuracy

± 15° with optional coupler/decoupler

Integrated CDN-E4554:

 

  AC Voltage and Current              

50-480 VAC, 32A, 5 lines/3 phases

  DC Voltage and Current

N/A

ECAT Data Sheet

I would recommend Transient Specialists. Transient Specialists always provides quality products within the established timeframes. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.

Scott D., TUV SUD Canada

 

Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!

John H., Gates Air, Inc.

 

Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.  

Adam P., Clark Testing

 

Working for a testing company I deal with renting equipment all the time.  Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.

Richard T., National Technical Systems