EM Test VSS 500N6.4 - Rental 6kV 0.5J Surge Transient Generator

6kV 0.5J Surge Pulse Generator

EM Test VSS 500N6.4 - Rental 6kV 0.5J Surge Transient Generator

Availability: In Stock - Order by 3PM Ships Today!

Surge Pulse Geneartor Features 

      • 1.2/50us Surge Pulse to 6.6kV
      • Constant Energy of .5J at Each Test Level
      • 500 Ohm Source impedance 
      • ISO 17025 Accredited Calibration included
      • Warning Lamp & Peak Voltage/Current Measurement
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The VSS 500N6.4 by EM Test provides the common surge immunity testing waveform (1.2/50us) to 6.6kV to IEC 60255-27 test levels 1-5. This equipement is ideal for overvoltage tests on protection relays and has no-load waveshaping. The no-load waveshape corresponds to IEC-61180-1. For this kind of testing the IEC 60255-27 standard requires a fixed energy of 0.5 J at the 1000 V and 5000 V test levels. To comply with safety regulations the VSS 500N6 is equipped with a contact to control warning lamps and with a safety interlock. This test generator comes with an ISO 17025 accredited calibration and meets IEC 60255-27 .5 J energy requirements.

Monitoring & Verification

Surge Pulse Geneartor Features 

      • 1.2/50us Surge Pulse to 6.6kV
      • Constant Energy of .5J at Each Test Level
      • 500 Ohm Source impedance 
      • ISO 17025 Accredited Calibration included
      • Warning Lamp & Peak Voltage/Current Measurement
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The VSS 500N6.4 by EM Test provides the common surge immunity testing waveform (1.2/50us) to 6.6kV to IEC 60255-27 test levels 1-5. This equipement is ideal for overvoltage tests on protection relays and has no-load waveshaping. The no-load waveshape corresponds to IEC-61180-1. For this kind of testing the IEC 60255-27 standard requires a fixed energy of 0.5 J at the 1000 V and 5000 V test levels. To comply with safety regulations the VSS 500N6 is equipped with a contact to control warning lamps and with a safety interlock. This test generator comes with an ISO 17025 accredited calibration and meets IEC 60255-27 .5 J energy requirements.

Data Sheet User Manual

Common Standards

IEC 60255-27

VSS 500N6.4

 0.55kV, 1.0kV, 3.0kV, 5.0kV, 6.6kV

  Standards

IEC 61000-4-4, ed.3

VOLTAGE SURGE SIMULATOR, PULSE 1.2/50 US



  Voltage (o.c.)

250 V - 6,600 V ±10 %,

 Pulse front time

1.2 us ± 30 %

  Pulse time to half value

50 us ± 20 %

  Source impedance

500 Ohm

  Energy

0.5 J ± 0.05 J at each test level

  Pulse forming

 As per IEC 60255-27 (previous -5)

 Polarity

Positive, negative or alternating

  Event counter

 1 - 30,000 or endless

 TRIGGER


  Trigger of events

Automatic, manual, external

  CRO trigger

 5V trigger signal for oscilloscope

 Synchronization

 0° - 360°, resolution 1°

 Repetition rate

6 s - 999 s, depending on the voltage

 OUTPUT


  Direct

Via HV connector; Zi = 500 Ohm To connect externaltest boxes or devices

MEASUREMENTS

  Peak voltage

6,600 V in the LCD display

  Peak current

13 A in the LCD display

Widely Used Standards

This list is a more comprehensive list of all the standards covered with this immunity generator. This is by no means all the standards covered, but the major ones from the largest manufacturers and most widely used standards.

    • ANSI/IEEE C37.90
    • EN 60255-27
    • EN 60255-5
    • IEC 60255-27
    • IEC 60255-5
    • IEC 60747-5
    • IEC 61180-1
    • IEC 62052-11

I would recommend Transient Specialists. Transient Specialists always provides quality products within the established timeframes. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.

Scott D., TUV SUD Canada

 

Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!

John H., Gates Air, Inc.

 

Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.  

Adam P., Clark Testing

 

Working for a testing company I deal with renting equipment all the time.  Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.

Richard T., National Technical Systems

Comparable EMC Systems

Capabilities & Voltage 6.6kV Combination Wave, 4.8kV EFT, & 6.6kV Ringwave 6kV Combination Wave, 4.4kV EFT, 6kV Ringwave, & 50-250VAC Dips Interrupts, 7kV Combination Wave, 5kV EFT, & 7kV Ringwave 7kV Combination Wave, 5.5kV EFT, & 6kV Ringwave
Standards (IEC) IEC 61000-4-5, IEC 61000-4-4, & IEC 61000-4-12 IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-11, & IEC 61000-4-12 IEC 61000-4-5, IEC 61000-4-4, & IEC 61000-4-12 IEC 61000-4-5, IEC 61000-4-4, & IEC 61000-4-12
Built-in Coupler CDN 3061 - 270V/16Amp AC/DC 250V/16Amp AC 100V/10Amp DC 264V/16Amp AC/DC & 220V/10Amp AC/DC 300V/16Amp AC 300V/10Amp DC
Rental CDNs 1 & 3-Phase Automatic 1-Phase Auto & 3-Phase Manual (EFT) 1 & 3-Phase Automatic 1-Phase Auto & 3-Phase Manual (EFT)
Additional Features Many Rental CDNs Available & Easy to Use 10X700 Telecom to 6kV & Built-in Dips Interrupts Voltage/Current Monitoring on Front EM Test Solution 300V 1-Phase Coupler