ESD Insulating Test Paper/Foil - IEC 61000-4-2 Setup

ESD Test - IEC 61000-4-2:

• GCP, HCP, VCP, & Cables w/ Resistors 
• Can be purchased New/Used
• For Full IEC 61000-4-2 Setup - Components Available!
• Free Technical Support & 2 Days Free Transit
• Some Models - Removable Legs
• Turnkey Solution - Arrives Ready for Testing!

Overview

Renting and purchasing the electrostatic discharge test setup for EN IEC 61000-4-2 testing allows a quick and cost efficient solution for testing needs. This immunity test setup includes: vertical coupling plane (VCP), horizontal coupling plane (HCP), insulating paper/foil, all wood table with removable legs, ground coupling plane (GCP), and all required accessories for assembly. All of our testing equipment and accessories come with technical support.

This Equipment is quite large and needs to ship via freight.  Select Fedex ground (no charge), and then we will call you for a shipping account number or a separate payment for the shipping costs (approximately $250 each way).

ESD Vertical Coupling Plane IEC 61000-4-2:

• Can be purchased New/Used
• Pricing For Full IEC 61000-4-2 Setup
• Can be rented/purchased
• Made to IEC 61000-4-2 Dimensions
• Turnkey Solution - Arrives Ready for Testing!

Overview

Renting and buy the vertical coupling plane (VCP) for EN IEC 61000-4-2 for electrostatic discharge (ESD) Testing. This part of the common commercial ESD setup comes with wood stand and appropriate size metal sheet which can be put in the stand. This plane is designed to be part of a larger setup. All of our testing equipment and accessories come with technical support.

Bench top set-up:

• Exact Pricing Adjusted Per Metal Thickness Selected
• Includes Field Coupling Plane & Isolation Block
• Power-Up ESD Test Setup to ISO 10605
• Copper construction of field coupling plane
• Turnkey Solution - Arrives Ready for Testing!

Overview

Buy the ISO 10605 test bench top for power on compliant testing for power on EUT testing. This setup can be purchased individually separate from other test equipment, or added with the EN/IEC 61000-4-2 setup allowing for a full ESD test setup. There maybe minor superficial scratches from manufacturing and shipping on copper test set. This equipment will need to shipped freight, if purchasing online, follow instructions below.

This Equipment is quite large and needs to ship via freight. Select Fedex ground (no charge), and then we will call you for a shipping account number or a separate payment for the shipping costs .

Teseq Grounding Cable

• Bleed Off Cable Including HV Resistors
• Price is for Individual (Single) Cable 
• INA 414 (Part# 403-765)
• Can be purchased in .8 or 2 meter length
  
• 2 Year Manufacturer Warranty

Overview

Buy the EM Test the bleed off cables and associated HV resistors for IEC 61000-4-2 electrostatic discharge (ESD) testing. This piece of the ESD setup comes with easy to use connections on both ends of the cables. These resistors and cables are designed to handle up to 30kV allowing for them to meet a variety of standards and requirements.

Insulating Foil/Paper For ESD Testing:

• Designed for ESD Testing (IEC 61000-4-2)
• Required for a variety ESD setups/tests
• Pricing For Full IEC 61000-4-2 Setup
• Can be purchased by the Foot (minimum 4 feet)
• Data Sheet With Exact Sizing Available on Request

ESD Bleeder Cables & Resistors IEC 61000-4-2:

• Bleed Off Cables Including HV Resistors
• Required for a variety ESD setups
• Pricing For Full IEC 61000-4-2 Setup
• Can be rented with setup
• Data Sheets Available upon Request

Overview

Renting and buy the bleed off cables and associated HV resistors for IEC 61000-4-2 electrostatic discharge (ESD) testing. This piece of the ESD setup comes with easy to use connections on both ends of the cables. These can be purchased individually or rented with an entire setup designed for commercial ESD testing.

ESD Pulse Target:

• Target for precise ESD pulse measurements
• Precise gold plated construction
• ISO 17025 Calibration included
• Free Technical Support & 2 Days Free Transit
• Very small insertion loss variation
• Includes target, attenuator and cable

Overview

The MD 102a, successor to the MD 103 , is a electrostatic discharge calibration target used for verifying waveforms of ESD simulators/guns. All the elements incorporated within the measurement chain must be matched to one another before highly accurate measurements with minimal uncertainties can be contemplated. This test accessory offers distortion-free, flat frequency characteristic up to at least 6 GHz. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities. 

Faster oscilloscopes enable more complete measurements and analyses of the fast ESD pulses but, of course, the rest of the components in the measurement chain must be up to the necessary standard and exhibit the appropriate frequency response. Therefore the MD 102 set offers a complete measuring path from the target to the attenuator up to the high quality coax cable. The whole path has to be left together and should not be disassembled into parts, as the whole coupling path is calibrated in one piece. The MD102 replaces the MD101 & MD103 ESD targets.

Battery Pack Features

• Designed for Teseq (Schaffner) NSG 435
• Older Battery Chargers - Confirm Compatibility
• Part Number - INA 405/402-968B
• Ametek Warranty (2 Year) on Parts

Overview

Buy the INA 405, battery pack designed for NSG 435. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities. 

Custom discharge networks for both the NSG 437 and NSG 438 electrostatic discharge simulators/guns are available upon request. These networks are designed for either the simulator and can cover a large range of testing requirements. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These networks can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities. 

Discharge Tip Features

• Designed for Teseq NSG 435 
• Part Number - INA 425
• Ametek Warranty (2 Year) on Parts
• Turns Onto the Front of Simulator

Overview

The INA 425, contact discharge tip for the NSG 435 provides capabilities for IEC 61000-4-2 testing. It is only designed for use with the NSG 435 and NSG 434 simulator. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities. 

NSG 435 Grounding Cable

• Individual item for Purchase
• Includes Bolt & Wire
• For Use With Teseq NSG 435
• Part Number: 402-988

Overview

Buy the NSG 435 grounding cable. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities. 

NSG 435 Mains Power Connection

• Individual item for Purchase
• For use with Teseq NSG 435
• INA 402-04 Part# 403-022

Overview

Buy the NSG 435 mains power connection. Transient Specialists is the only authorized sale partner of Teseq/EM Test ESD simulators and accessories in the United States. These can be ordered with purchases of new equipment or order individually to supplement existing testing capabilities.