MIL-STD-461 CS118 Test Package - Simulator & Monitoring Devices

ESD Simulator, Voltmeter, & Target

MIL-STD-461 CS118 Test Package - Simulator & Monitoring Devices

CS118 Simulator & Monitoring Device:

      • Includes: ESD Simulator, Target, & Voltmeter
      • Voltmeter Measure DC up to 100kV
      • ISO 17025 Calibration included
      • Free Technical Support & 2 Days Free Transit
      • Other 16kV Simulators Available!
      • Wide measurement & High input impedance

Overview

This test package/system is the Teseq MD102A ESD target test set, ESD voltmeter designed for DC power, and EM Test Dito simulator. The simulator can be changed to modify testing preferences. This package doesn't include any attenuators, metal ground plane, or an ionizer. It also doesn't include any oscilloscopes greater than or equal to 1Ghz. These other pieces of equipment can be purchased from various sources. The entire setup, or individual components can be calibrated upon request. 

The Dito by EM Test a hand-held, lightweight ESD simulator that allows for air discharge to 16.5kV and contact mode to 10kV for testing to IEC 61000-4-2. A2LA accredited calibration is included in the EMC rental equipment price.Transient Specialists is the only authorized sale partner of EM Test ESD simulators in the United States.

CS118 Simulator & Monitoring Device:

      • Includes: ESD Simulator, Target, & Voltmeter
      • Voltmeter Measure DC up to 100kV
      • ISO 17025 Calibration included
      • Free Technical Support & 2 Days Free Transit
      • Other 16kV Simulators Available!
      • Wide measurement & High input impedance

Overview

This test package/system is the Teseq MD102A ESD target test set, ESD voltmeter designed for DC power, and EM Test Dito simulator. The simulator can be changed to modify testing preferences. This package doesn't include any attenuators, metal ground plane, or an ionizer. It also doesn't include any oscilloscopes greater than or equal to 1Ghz. These other pieces of equipment can be purchased from various sources. The entire setup, or individual components can be calibrated upon request. 

The Dito by EM Test a hand-held, lightweight ESD simulator that allows for air discharge to 16.5kV and contact mode to 10kV for testing to IEC 61000-4-2. A2LA accredited calibration is included in the EMC rental equipment price.Transient Specialists is the only authorized sale partner of EM Test ESD simulators in the United States.

Data Sheet - EM Test Dito

Common Standards

EN/IEC 61000-4-2, ISO 10605, MIL-STD-883

MIL-STD-461 CS118

  Measurement Range

 DC ± 1V ~ 100 kV (Auto ranging 1 ~ 19,999 V and 10 ~ 100,000V)

  Measurement Resolution

1V for low range and  10 V for high range

  Measurement Accuracy

±1% ± 2 counts


  Input Impedance

> 100 G Ohm

  Display

4½ Digit LCD

  Power

AC 100-240 V or  9V Battery

  Working Temperature

32 to 122°F (0 to +50°C)

  Working Humidity

0 to 70% RH

  Product Weight

 Approx. 1.2 kg; 2 lbs. 10 oz

  Dimensions (LxWxH)

216 x 153 x 356 mm; 8.5 x 6 x 14 in.

EM Test Dito

 

RC Network

150 pf/ 330 ohm

Voltage Range Air Discharge

500V to 16.5kV ±5%

Voltage Range Contact Mode

500V to 10kV ±5%

Polarity

Positive, negative

Resolution

100V

Holding time

More than 5 seconds

Test voltage

measured, indicated in the display

Single mode

Release of single pulses

Continuous mode

Continuous discharge up to 20Hz (AD) and 10Hz (CD)

Pulse release via software

Remote control from computer via fiber optic link (USB)

CD mode

EN/IEC 61000-4-2; 150pF/330ohm

Rise time

0.8ns +/- 25%

Easy Zap

Test based on standard levels

Quick Zap

All test parameters are adjustable during test; fast and easy-to-use

Standard Test routines

As per EN/IEC 61000-4-2, EN 61000-6-1/-6-2

Repetition Rate

Single shot mode, 1 shot/sec, 20 shots/sec AD,  10 shots/sec CD

Programmable

Yes, preprogrammed test routines included

Remote Control

Via USB fiber optic link

Battery Recharge Time

ACCU battery Less than 1.5 hours

Useable During Recharge

No

Weight

940 grams, 2.1 pounds

Dimensions

33x13x8cm, 13x5x3 inches

Included with standard rental/purchase:

    • ESD Simulator/Gun
    • Voltmeter
    • Air discharge quick connect cable
    • MD102A calibration target
    • Battery
    • Charger
    • Air Discharge Tip
    • Contact Discharge Tip
    • Ground Strap
    • Alligator Clip
    • Printed Manual
    • Calibration Documentation
    • Plastic Case 

I would recommend Transient Specialists. Transient Specialists always provides quality products within the established timeframes. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.

Scott D., TUV SUD Canada

 

Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!

John H., Gates Air, Inc.

 

Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.  

Adam P., Clark Testing

 

Working for a testing company I deal with renting equipment all the time.  Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.

Richard T., National Technical Systems

Refunds - If you are not satisfied with your purchase, please contact us within 24 hours of receipt of the equipment and you can return the product and get a full refund or exchange the product for another unit.

 

Warranty - Ametek CTS puts a two year warranty on parts/labor on all ESD Simulators/Guns. With that being said, as the US distributor for Teseq and EM Test, Transient Specialists can offer this warranty at time of sale on associated equipment.