EM Test NX5 - Rental 5kV Surge & EFT Generator 16A. Coupler

RENTAL

EM Test NX5 - Rental 5kV Surge & EFT Generator 16A. Coupler

Availability: In Stock - Order by 3PM Ships Today!

Conducted Immunity Surge & EFT Generator

      • 5kV Surge/Bi-wave 5.5kV 1-phase 300v/16a Coupler 
      • ISO 17025 Accredited Calibration Included
      • Smallest compact generator with 7" touch screen
      • Built-in single phase CDN up to 400 V/32 A
      • Free Technical Support & 2 Days Free Transit
      • Manual front panel operation with setup pictures
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Rent the EM Test NX5 EMI test generator to 5.5kV EFT and 5kV surge with a built-in 16 amp single phase coupler (300V/16Amps). This test system provides an ultra compact, easy to use, touch screen allowing for effective testing. The NX 5 series comes in many variations incluing the NX 5 32Amp Coupler. It is the most versatile tester to address transient and power fail requirements for both international and commercial standards. An ISO 17025 accredited calibration and associated cords is included with the rental.

This Immunity Test Generator includes an easy-to-use color touch screen allow for efficiently changing of testing parameters. It can be operated manually from the intuitive front touch screen or remotely via its built-in Ethernet, USB or optical interface. The NX 5 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing.

This product includes many reprogrammed test routines ideal for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11 and CE Mark. This EM Test pulse generator includes internal single-phase Coupling/Decoupling Network (CDN) that can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 Amp per phase. With separate power mains supply inputs, it allows the utilization of different EUT supply voltages for maximum flexibility.

EM Test NX5 - Rental Immunity Accesories

Conducted Immunity Surge & EFT Generator

      • 5kV Surge/Bi-wave 5.5kV 1-phase 300v/16a Coupler 
      • ISO 17025 Accredited Calibration Included
      • Smallest compact generator with 7" touch screen
      • Built-in single phase CDN up to 400 V/32 A
      • Free Technical Support & 2 Days Free Transit
      • Manual front panel operation with setup pictures
      • Turnkey Solution - Arrives Ready for Testing!

Overview

The Rent the EM Test NX5 EMI test generator to 5.5kV EFT and 5kV surge with a built-in 16 amp single phase coupler (300V/16Amps). This test system provides an ultra compact, easy to use, touch screen allowing for effective testing. The NX 5 series comes in many variations incluing the NX 5 32Amp Coupler. It is the most versatile tester to address transient and power fail requirements for both international and commercial standards. An ISO 17025 accredited calibration and associated cords is included with the rental.

This Immunity Test Generator includes an easy-to-use color touch screen allow for efficiently changing of testing parameters. It can be operated manually from the intuitive front touch screen or remotely via its built-in Ethernet, USB or optical interface. The NX 5 provides an economical solution for pre-compliance immunity testing as well as full-compliance testing.

This product includes many reprogrammed test routines ideal for testing to EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11 and CE Mark. This EM Test pulse generator includes internal single-phase Coupling/Decoupling Network (CDN) that can be extended for testing three-phase EUTs by means of an automatically controlled external CDN up to 200 Amp per phase. With separate power mains supply inputs, it allows the utilization of different EUT supply voltages for maximum flexibility.

Data Sheet User Manual Application Guide - CDNs

Common Standards

EN/IEC 61000-4-4, EN/IEC 61000-4-5, EN/IEC 61000-4-11 (with optional V4780S2) CE Mark

Integrated CDN:

 

  AC Voltage and Current 

300V/32A; 50/60Hz

  DC Voltage and Current

300V/16A

EFT Burst 5/50ns:

 


  Standards

EN/IEC 61000-4-4, and EN 61000-6-1,-6-2, CEMark

  Voltage Waveform into 50Ω load

5ns Rise Time ±30%,  50µs pulse width ±30%

  Voltage Waveform into 1000Ω load

5ns Rise Time ±30%,  50µs pulse width -15ns/+100ns

  Voltage Amplitude

200-5,500V ±10%, 100V-2,750V ±10% into 50Ω

  Burst Duration  

td = 0.10ms - 999ms

  Burst Period

tr = 10ms - 9,999ms

  Frequency

f = 0.1kHz - 1,000kHz

Combination Wave Surge:

 

  Standards

EN/IEC 61000-4-5 , EN 61000-6-1, -6-2, CEMark

  Open Circuit Voltage Waveform

160V – 5,000V, Front Time1.2us ±30%, 50µs Duration ± 20%

  Short Circuit Current Waveform

2,500A ±10%, 8µ Front Time ±20%, 20µs Duration ±20%

  Peak Open Circuit Voltage

160V–5kV ±10%

  Peak Short Circuit Current

125A–3kA ±10%@2 Ω, 20.8-500A ±10%@12Ω

  Pulse Repetition Rate

MAX. 1Hz (1s – 999s)

Peak Voltage and Current Monitoring

5,000V, 2,500A in the LCD Display

Monitoring of EUT voltage and current

Built-in 100:1 voltage measurement

10mV/A, max. 1,000A

Weight

35 kg, 77 pounds

Dimensions

50x43x28 cm, 20x17x11 inches

 

Included with Rental Of EM Test NX5

Below you will find a list of common accessories that you can expect to be delivered with the equipment. This is a generic standard list and should you require an exact connector or accessory please contact us prior to order shipping. We are also excited to offer many different testing accessories not standard with the immunity generator. This does not include any coupler/decoupler items or accessories. A detailed list of these can be found on the "All Accessories" tab. 

 

NX5

    • Conducted Immunity System
    • Power Cord
    • Printed Manual 
    • Calibration Documentation
    • ESC EUT Power In Cord
    • ESA 1.6 EUT Supply Adapter
    • SCC AD Short Circuit Interlock
    • SWLAD Warning Lamp Adapter Interlock
    • Ethernet Cable
    • Software on USB Stick
    • Software License
    • UOC Optical Converter USB to LWL
    • 5m. Orange Fiber-optic cable
    • EFT Ground Strip
    • Case

     

    Widely Used Standards

     

    This list is a more comprehensive list of all the standards covered with this conducted immunity generator. For assured compliance to a particular standard, confirm prior to rental. This EM Test equipment has the ability to either cover all, or part of the standards below.

     

    • ECE-R10
    • EN 300329
    • EN 300340
    • EN 300342-1
    • EN 300386 V1.3.2
    • EN 301489-1
    • EN 301489-17
    • EN 301489-24
    • EN 301489-7
    • EN 50121
    • EN 55024
    • EN 61000-4-11
    • EN 61000-4-29
    • EN 61000-4-4
    • EN 61000-4-5
    • EN 61000-4-8
    • EN 61000-4-9
    • EN 61000-6-1
    • EN 61000-6-2
    • FCC 97-270 (part 68)
    • IEC 60255-22-5
    • IEC 61000-4-11
    • IEC 61000-4-29
    • IEC 61000-4-4
    • IEC 61000-4-5
    • IEC 61000-4-8
    • IEC 61000-4-9
    • IEC 61326
    • IEC 61850-3
    • ITU-T K.20
    • ITU-T K.21
    • ITU-T K.41
    • ITU-T K.45

    Configurations EM Test NX5 Series

    There are a variety of different configurations of the NX 5 series of test equipment. These vary depending upon the waveform generator/testing capabilities and capabilities of built-in coupler. Testing capabilities include Burst/EFT (electrical fast transients), Surge (combination wave), Power Fall, and Telecom Surge in with both 16 amp and 32 amp CDNs.

    EM Test NX 5 Capabilities Chart

    I would recommend Transient Specialists. Transient Specialists always provides quality products within the established timeframes. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.

    Scott D., TUV SUD Canada

     

    Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!

    John H., Gates Air, Inc.

     

    Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.  

    Adam P., Clark Testing

     

    Working for a testing company I deal with renting equipment all the time.  Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.

    Richard T., National Technical Systems