Radiated Immunity IEC 61000-4-3 (10 V/m) Test System

AS0860-50, CBA 1G-300B, & Antennas

Radiated Immunity IEC 61000-4-3 (10 V/m) Test System

Availability: In Stock - Order by 3PM Ships Today!

Radiated Immunity Systems Features 

      • Amps: 80MHz-1GHz 300W & 800MHz-6GHz 50W
      • Includes: Amplifiers, Log Antenna, & Horn Antenna
      • IEC 61000-4-3 Test System; Radiated Immunity
      • Free Technical Support & 2 Days Free Transit
      • 3 V/m Solution over 800MHz-6GHz
      • Turnkey Solution - Arrives Ready for Testing!

Overview

This radiated immunity test system includes the AS0860-50, CBA 1G-300B, SAS-517 (log periodic antenna), and SAS-571 (horn antenna). This system provides 50 Watts over 800Mhz-6Ghz range (including corresponding antennas), additional amplifiers for a variety of testing needs are available upon request. It arrives ready for testing to begin and comes with two days for shipping.The frequency ranges and power make it a great solution for Telecom, Instrumentation, and many other applications.

 

IEC 61000-4-3 Test Systems/Equipment

Radiated Immunity Systems Features 

      • Amps: 80MHz-1GHz 300W & 800MHz-6GHz 50W
      • Includes: Amplifiers, Log Antenna, & Horn Antenna
      • IEC 61000-4-3 Test System; Radiated Immunity
      • Free Technical Support & 2 Days Free Transit
      • 3 V/m Solution over 800MHz-6GHz
      • Turnkey Solution - Arrives Ready for Testing!

Overview

This radiated immunity test system includes the AS0860-50, CBA 1G-300B, SAS-517 (log periodic antenna), and SAS-571 (horn antenna). This system provides 50 Watts over 800Mhz-6Ghz range (including corresponding antennas), additional amplifiers for a variety of testing needs are available upon request. It arrives ready for testing to begin and comes with two days for shipping.The frequency ranges and power make it a great solution for Telecom, Instrumentation, and many other applications.

 

Data Sheet - AS0860-50 Data Sheet - CBA 1G-300D

 Frequency Range - AS0860

 0.8 to 6.0 GHz

 Psat (min)

 60 W 

 P1dB (min)

 50 W

 Gain (min) 

 47.0 dB
 Gain Control  0-20 dB in 255 Steps

 Harmonics at P1dB

 -18dBc (Typical)

Third order intercept point IP3

10dB > P1dB

Input Power (no damage)

+15 dBm

 Output VSWR tolerance Output VSWR tolerance

Infinite any phase

Stability

Unconditional

Output impedance

50 Ohm

Output VSWR

2:1 typical

Input VSWR

2:1 max

Spurious

-70 dBc (min) -80 dBc (typical)

Noise figure

 8.0 dB

Safety interlock

Via rear panel BNC connector

Supply Voltage – Supply Voltage –1 Phase

85 to 264 VAC

Supply Frequency

47 to 63 Hz

Supply Power

< 0.65 kVA (typical full power)

RF Input

Type N female

RF Output

Type N female

Dimension

19 inches, 4U 615 mm Deep

Weight

20 kg

Common Standards - CBA 1G-300D

EN/IEC 61000-4-3, CISPR 24, EN 61000-6-1, EN 61000-6-2, 

IEC 60601-1-2, MIL-STD-461, ISO 11452 (2,3,&5)

Frequency Range (Instantaneous)

80 to 1000 MHz

Rated Output Power

300 W minimum 

Output Power at 1dB Gain Compression

250 W minimum
Gain  55 dB

Gain Flatness

+/-3 dB (maximum)

Additional RF Data

 

Harmonics at 250 W

-20 dBc

Spurious

-50 dBc

Maximum Input without Damage

+10 dBm

Stability

Unconditionally stable

Load VSWR without damage (All Phase Angles)

Infinite

Load VSWR without foldback (All Phase AWngles)

4:1

RF Input

Type N (socket)

RF Output

Type N (socket)

Gain Control

0–30 dB in 255 steps

Impedance/VSWR

 

Output Impedance

50 Ω

Input VSWR

2:1

Output VSWR

2:1

Interfaces and Electrical

Interface

Touch screen, GPIB, RS232, Ethernet & USB

Safety Interlock

BNC Connector, Open for Standby

Supply Voltage

90-264 VAC

Supply Frequency

47–63 Hz

Supply Power Requirement

<4 kVA

Milmega Amplifiers AS0860 Series

 

  • AS0860-25/25
  • AS0860-40/25
  • AS0860-40/45
  • AS0860-75/45
  • AS0860-150/45
  • AS0860-150/90
  • AS0860A-25/25
  • AS0860A-50/25
  • AS0860A-100/25
  • AS0860A-100/50
  • AS0860A-200/50
  • AS0860A-200/100
  • AS0860B-50/50
  • AS0860B-100/100
  • AS0860B-200/100
  • AS0860A-200/25
  • AS0860-30
  • AS0860-50
  • AS0860-100
  • AS0860-200
  • AS0860-400

Teseq CBA Model

Watts
CBA 1G-1200B 1200 Watts
CBA 1G-600B 600 Watts

CBA 1G-300D

300 Watts
CBA 1G-150D 150 Watts

CBA 1G-100D

100 Watts

CBA 1G-030D

30 Watts

I would recommend Transient Specialists. Transient Specialists always provides quality products within the established timeframes. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.

Scott D., TUV SUD Canada

 

Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!

John H., Gates Air, Inc.

 

Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.  

Adam P., Clark Testing

 

Working for a testing company I deal with renting equipment all the time.  Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.

Richard T., National Technical Systems

 

I would recommend Transient Specialists. Transient Specialists always provides quality products within the established timeframes. The equipment always meets the specifications and properly shipped within the time frames within the time frames promised.

Scott D., TUV SUD Canada

 

Transient Specialists has been outstanding at working with us for our specialized EMC equipment rental needs. Fast shipments and excellent accommodation for some customized setups. I recommend them highly and they are a pleasure to partner with!

John H., Gates Air, Inc.

 

Laura, I want to thank you and Goran for your excellent customer service and turn around time on the rentals and the calibration documents.  

Adam P., Clark Testing

 

Working for a testing company I deal with renting equipment all the time.  Transient Specialist is the first company I call on my list of rental houses because of their great personnel, prompt delivery of the equipment, knowledgeable and accommodating to the customers needs.

Richard T., National Technical Systems