Teseq MD 210 Rental - 7kV Differential Probe 70MHz

Differential Probe Features 

• Selectable attenuation settings of 100x/1000x
• 70 MHz bandwidth (-3 dB)
• Power and over-range indicators
• Up to ±7 kV differential and common mode
• High CMRR

Overview

Differential probes allow safe, accurate measurement between two voltage points where neither point is referenced to ground. The CT3681 and CT3683 both offer a 70 MHz bandwidth and can test up to ±7 kV (DC + AC peak). Compatible with oscilloscopes from all major manufacturers, the probes can be battery operated, powered by a universal adapter (optional), or powered by USB power lead (optional) if the oscilloscope is so equipped

Features 

• Meets IEC 61010-031 safety standard
• Up to ±1.5 kV / ±15 kV differential
• 50 MHz bandwidth (-3 dB)
• Excellent CMRR
• Power and over-range indicators

Overview

Current Monitoring Features 

• Maximum Peak Current - 5000 Amperes
• ISO 17025 Accredited Calibration included
• Pearson Electronics Monitor Model 110
• Useable rise time 20 Nanoseconds
• Output Resistance 50 Ohms
• Turnkey Solution - Arrives Ready for Testing!

Overview

Pearson Model 110 Current Probe.  Donut shaped for current monitoring up to 5000 Amps .1 Volts per Amp. attenuation.

10kV HV Probe Features

• 10kV High Voltage Probes - Ideal for EMI
• 200:1 Attenuation; Low EMI sensitivity
• BNC Connection to Oscilloscope
• Convenient to use & Self Interlock system 
• Arrives Ready for Testing!

Overview

The differential oscilloscope probes normally used for monitoring high voltage surges and transients are generally large and cumbersome (because they are designed for use to 40 kV), unduly sensitive to noise, and difficult to maintain in close compensation adjustment. KeyTek'sModel PK 1001Dis a relatively small, lightweight probe designed to provide accurate transmission of peak surge waves to 6 kV,with fronts from 10 ns to 1.2.

Its relatively low input impedance provides low sensitivity to noise. Quick and convenient to use, the Model PK 1001 requires no ground at the probe tip, and no compensation adjustments. An auxiliary interlock unit ensures a high degree of operator safety during probe use.

Differential Probe Features 

• Attenuation settings 1000:1, +/-5%
• Frequency: DC-75MHz 
• Part Number: 070-0373-02
• Input Resistance 100 Megohms
• Max W/out Dialectic Fluid 13kV to 2MHz

Overview

The P6015 high-voltage probe is a dc-to-75 MHz, 1000x attenuator probe that adds high-voltage capabilities to oscilloscopes with input resistances of 1MegaOhms paralleled by 12pF to 60pF. This probes body is made of high-impact thermoplastic material that provides mechanical protection for its internal components and electrical protection for the user. The probe's dielectric properties can be improved by filling it with fluorocarbon gas.

The standard probe includes a 10-foot interconnecting cable with a resistive center conductor, and the compensating box. The probes and instruments must be used and calibrated at a temperature between 20 degree and 30 degree Celsius.

6kV HV Probe Features

• 6kV High Voltage Probes - Ideal for EMI
• 200:1 Attenuation; Low EMI sensitivity
• BNC Connection to Oscilloscope
• Convenient to use & Self Interlock system 
• Arrives Ready for Testing!

Overview

The differential oscilloscope probes normally used for monitoring high voltage surges and transients are generally large and cumbersome (because they are designed for use to 40 kV), unduly sensitive to noise, and difficult to maintain in close compensation adjustment. KeyTek'sModel PK 1001Dis a relatively small, lightweight probe designed to provide accurate transmission of peak surge waves to 6 kV,with fronts from 10 ns to 1.2.

Its relatively low input impedance provides low sensitivity to noise. Quick and convenient to use, the Model PK 1001 requires no ground at the probe tip, and no compensation adjustments. An auxiliary interlock unit ensures a high degree of operator safety during probe use.

Burst/EFT Pulse Verification Kit 

• Verification/calibration kit for IEC/EN 61000-4-4
• For peak voltages up to 8.8 kV 
• INA 265B: 50 Ω termination
• INA 266A: 1 kΩ termination
• Turnkey Solution - Arrives Ready for Testing!

Overview

The Teseq CAS3025 burst/EFT pulse verification kit has been specially designed to comply with the new requirements of IEC/EN 61000-4-4:2004 to enable EMC engineers to verify their burst/EFT test generators periodically. Many EMC standards call for a verification of the test equipment before and after every test session. If the verification shows differing results, no valid test results can be assumed and the test equipment has to be re-calibrated.

Differential Probe Features

• Surge pulse measurements
• Power quality measurements
• Rated for 7000 V/70 MHz, differential mode
• 2 ranges: 1:1000 and 1:100
• Compatible with all types of oscilloscope
• Suitable for simple burst pulse verification

Overview

The Teseq MD 210 high voltage differential probes are ideally suited to allow EMC engineers to verify their conducted EMC test generators periodically. Their performance permits to be used for many other purposes where higher voltages have to be measured in a potential free manner.

Current Monitoring Features 

• Maximum RMS Current - 200 Amperes
• ISO 17025 Accredited Calibration included
• Pearson Electronics Monitor Model 101
• Useable rise time 100 Nanoseconds
• Output Resistance 50 Ohms
• Turnkey Solution - Arrives Ready for Testing!

Overview

Pearson Model 101 Current Probe.  Donut shaped for current monitoring up to 50000 Amps .1 Volts per Amp. attenuation.