Keytek ECAT 10kV Surge Test System 3-Phase CDN

Keytek 10kV Surge System:

  • Combination Wave Pulses to 10kV/5kA 
  • Complete Test System (E103, E510a, & E4554)
  • IEC/EN 61000-4-5 & ANSI C62.41 Compliant
  • Rental Verification Accessories Available 
  • Current ISO 17025 Cal & 2 Days Free Transit Time

Get weekly, two week, and monthly rentals on all products

Got Questions about the equipment? Get technical support

Two FREE days transit time with every rental

Request A Quote

HV Surge Transient Equipment


ECAT Surge/Combination Generator System Features 

      • Surge/Combination Wave Voltage up to 10 kV
      • ISO 17025 Calibration included
      • Includes - E103, E510 A, & E4554
      • Compact & IEC/EN 61000-4-5 compliant
      • Free Technical Support & 2 Days Free Transit
      • E4554 3-phase: CDN 480V/32A

Thermo Keytek ECATS (ECAT E103, E510 A, E4551 kV)  with the E 510 biwave surge to 10kV, 5kA, with integrated single phase coupler/decoupler. This system comes standard with an ISO 17025 accredited calibration and technical support.Thermo Keytek, E 510 Bi-wave Surge module to 10kV per IEC 61000-4-5 for the ECAT system, requires the E103 controller.

ECAT Data Sheet



Controller for the ECAT system with front panel and software operation.

E510A - Combination Wave Surge to



IEC 61000-4-5 ed. 3, EN 61000-4-5, ANSI/IEEE C62.41.2 Cat. B, UL 1449

Open Circuit Voltage Waveform

1.2µs, Front Time ± 30%, 50µs Duration ±20%

Short Circuit Current Waveform

8µs Front Time ±20%, 20µs Duration ±20%

Peak Open Circuit Voltage


Peak Short Circuit Current

100A–5kA -0+10%@2 Ω, 20.8-550A -0+10%@12Ω

Pulse Repetition Rate

1 shot/18 seconds


121 kg, 55 pounds


42x52x21cm, 16x20 x8 inches

E4554kV Three Phase Coupler/Decoupler



IEC 61000-4-5, EN 61000-4-5, ANSI/IEEE C62.41, UL 1449






Monitoring and peak detection of surge voltage across any two manually-selected lines.  Monitoring can be at the EUT or at the front panel of the coupler/decoupler


42cm X 52cm X 21cm (20 3/8  X 16 ½ X 8 ¼ inches)



ECAT Series

Common Modules


ECAT Series Full Accessory
Item Capabilities
ECAT Model E411 EFT/Noise Burst simulator for testing in accordance with IEC 61000-4-4 Edition 2 to 4.4kV
ECAT Model E412 EFT/Noise Burst simulator with built-in, single phase AC mains coupler/decoupler for testing in accordance with IEC 61000-4-4 Edition 2 to 4.4kV. Model E412 features all specifications and options noted in Model E411 (above), as well as the following:
ECAT Model E421 FT/Noise™ Burst Simulator for IEC 61000-4-4 Edition 2 to 8 k
ECAT Model E501B Plug-in combination wave surge simulator to produce the combination waves required by IEC 6100-4-5, ANSI/IEEE C62.41 Cat. B and UL 1449 at 3kA
ECAT Model E502B Plug-in module to produce the telecommunications surge wave required by IEC 61000-4-5, FCC Part 68 and ITU Rec K.17, K.20, and K.21 (formerly CCITT
ECAT Model E503 Plug-in module to produce the ring waves specified by ANSI/IEEE C62.41 Cat. A and B, and various UL standards, including UL 864
ECAT Model E504A Plug-in module to produce the combination wave required by UL 1449 (some devices must also be tested using the E501A surge module)
ECAT Model E505A Plug-in module that produces the lightning surge waveforms required by FCC Part 68
ECAT Model E506-4W Plug-in module to produce the 2/10 µs surges required by Telcordia GR-1089 CORE for up to five-wire (four terminal) testing
ECAT Model E508 and E508-12P Plug-in modules to produce the 10/360 µs surges required by Telcordia GR-1089 CORE
ECAT Model E510A Plug-in module to produce combination wave specified by ANSI/IEEE C62.41 Cat. B and IEC 61000 4-5 to 10kV and 5kA
ECAT Model E511 Plug-in module to provide combination waves to 6 kV and 5 kA, as required by British Telecom standards
ECAT Model E513 Plug-in module to produce voltage ramps for testing surge protection components such as gas tube arrestors; meets surge simulator requirements of UL 864
ECAT Model E514 Surge simulator for 10/1000 µs current waves
ECAT Model E515 Module to produce the 10/250 µs surges required by Telcordia GR-1089-CORE
ECAT Model E518 Plug-in module to produce the 10/1000µs waveforms to 2kV as required by Telcordia GR-1089-CORE for both Lightning Surge and Protection Coordination. Includes HB-ECAT
ECAT Models E521 and E522 Surge systems that produce the high voltage, high current combination waves required by ANSI standards for service entrance and outside connected electronics; meets requirements of IEC 61000-4-5 for all exposure categories. ECAT Model E521 includes built-in AC coupler/decoupler for singlephase lines to 480V, 32A; ECAT Model E522 includes built-in AC coupler/decoupler for three-phase lines to 480V, 32A/phase (actual AC mains current per AC line connector limits).
ECAT Model E551 A single-phase AC line (power lines) coupler/decoupler for surge waves, as specified by IEC 61000-4-5
ECAT Models EP61 and EP62 Plug-in modules provide swells, dips and interrupts on AC power mains in compliance with, and exceeding the requirements of IEC 61000-4-11 Edition 2. Model EP61 for single-phase AC lines to 240 RMS, 16A; Model EP62 for single-phase AC lines to 240 RMS, 32A
ECAT Model E455x Single and three-phase AC line coupler/decouplers for EFT and Surge waves, as specified by IEC 61000-4-4 Edition 2 and IEC 61000-4-5


You may also like

Recently viewed