ThermoScientific EMCPro Plus
Included Accessories
Can't find something? Contact UsRelated Equipment
Description
The EMCPro PLUS is an advanced EMC immunity test system developed by Thermo in response to manufacturers’ demands for a mid-range, low cost, multi-capability test system. The EMCPro PLUS is easily configured to meet today’s immunity standards required for CE Marking and compliance requirements. In addition, EMCPro PLUS capabilities go well beyond the required test levels for the CE Mark
The EMCPro PLUS performs compliance level testing requirements for IEC, UL, ANSI, ETSI and beyond.
Users may operate the EMCPro PLUS via Thermo’s easy to use Windows-based PC software, CEWare, or from the front panel. CEWare provides simple, straightforward pre-programmed test sequences ideal for the novice user; yet is sophisticated enough to allow an advanced user to develop and save custom test sequences for future testing.
Users may configure the EMCPro PLUS from a single test capability to up to seven capabilities in a single unit. When test requirements change, or as standards evolve, upgrading is a simple matter of adding appropriate options or accessories offered by Thermo to their current EMCPro PLUS.
One System, One Vendor, One Solution.
The EMCPro PLUS system offers the highest test levels and the widest selection of testing capabilities in a low-cost complete system solution.
- Specifications:
- Model: PRO-Base
- System Operating Voltage:
- 90-240VAC, 50/60Hz
- Integrated EUT Mains (CDN):
- AC Voltage: 1 phase, 50 - 250 VAC
Frequency: 50/60 Hz
DC Voltage: 100 VDC, Max
Current: 16 A, Max AC @250VAC, 10A, Max DC to 100VDC, 16A, Max to 48VDC - EUT Connectors:
- NEMA, British, Schuko, India, Australia, China
- Control Interface:
- Manual Via Front Panel VDU
Computer Via RS232/USB Fiber-optic interface - Safety Features:
- External Interlock for users, Interlock for CCL connector, External stop input
- Environmental Operating Conditions:
- Temperature +15 C to +40 C
Humidity 10 - 75%, non-condensing Altitude
8000 ft. maximum - Physical Specifications:
- Height: 22.9 cm (8.7 in)
Width:43.4 cm (17.1 in)
Depth: 64.8cm(25.5in)
Weight: 39 kg (85 lb) - CE Marking:
- Safety (LVD) and EMC Directives
- Surge Waveform Monitoring:
- Monitors are switched automatically to match generator coupling mode.
Voltage monitor provides 1000:1 +/-10% attenuation factor
Current monitor provides 200:1 +/-10% attenuation factor - Model: PRO-EFT
- EFT Testing
- IEC 61000-4-4, Ed.3; EN 61000-4-4; ANSI C62.41.2; ANSI C62.45
- Voltage Waveform (into 50? load):
- 5 ns RT +/-1.5ns; 50ns PW +/-15ns; Burst Duration 15ms +/-3ms @5kHz, 0.75ms +/-0.15ms @100kHz; Burst Period 300ms +/-60ms; Vpk 125V-2kV
- Voltage Waveform (into 1000? load):
- 5 ns RT +/-1.5ns; 50ns PW -15, +100ns; Burst Duration 15ms �3ms @5kHz; 0.75ms +/-0.15ms @100kHz; Burst Period 300ms +/-60ms; Vpk 240V-4kV
- Frequency:
- 1-100 kHz, in 0.5k Hz steps, +-/10%
- Model: PRO-Surge
- Surge
- per IEC 61000-4-5, Ed. 3, EN 61000-4-5, ANSI C62.41.2 Cat A & B, UL 1449 Ed. 3 Sect. 37; ANSI C62.45
- Direct Output
- OC Voltage Waveform:
- 1.2us Front Time +/- 30%
Duration 50us +/-20% - SC Current Waveform:
- 8us Front Time +/-20%
Duration 20us +/-20% - Peak OC Voltage:
- 250V - 6.0kV +/-10%, 2 Ohm or 12 Ohm mode
- Peak SC Current :
- 125 A - 3.0kA +/- 10% 2 Ohm mode
20.8 - 500A +/- 10% 12 Ohm mode - Impulse Repetition Rate:
- Up to 2 impulses/min @6kV
- Voltage Undershoot:
- 30% Max
- Coupling Capacitor:
- 18�F (Internal to generator)
- Output of CDN
- OC Voltage Waveform:
- 1.2us Front Time +/-30%
Duration 50us +/-10us - Peak OC Voltage:
- Set voltage +/- 10% either mode (2 Ohm or 12 Ohm)
- Voltage Undershoot:
- N/A at CDN
- Residual Surge Voltage:
- less than or equal to 15% of Set Voltage or less than or equal to 480V, whichever is higher
- Model: PRO-Ring
- Ring Wave Surge
- per ANSI C62.41.2, Cat A, B; IEC 61000-4-12 and EN 61000-4-12; ANSI C62.45
- OC Voltage Waveform:
- 100kHz Damped Cosine RT = 0.5us +/-30% Damping = 40%/peak
- Peak OC Voltage:
- 250V - 6.0kV +/-10%, 12 Ohm or 30 Ohm mode
- Peak SC Current2 :
- 200A +/-10% 30Ohm mode
500A +/-10% 12 Ohm mode - Impulse Repetition Rate:
- Up to 2 impulses/min @6kV (~24 Sec Charge Time)
info@transientspecialists.com